RE: [PATCH v2 2/3] dt-bindings: pinctrl: Add dt-bindings for Sunplus SP7021

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

Hi,

Thank you for your review.


> On Mon, Nov 01, 2021 at 04:11:16PM +0800, Wells Lu wrote:
> > Add dt-bindings header files for Sunplus SP7021 SoC.
> >
> > Signed-off-by: Wells Lu <wells.lu@xxxxxxxxxxx>
> > ---
> > Changes in v2:
> >  - Added more 'defines' in dt-bindings header files (forgot to add in v1).
> >
> >  MAINTAINERS                                 |   1 +
> >  include/dt-bindings/pinctrl/sppctl-sp7021.h | 171 ++++++++++++++++++++++++++++
> >  include/dt-bindings/pinctrl/sppctl.h        |  40 +++++++
> >  3 files changed, 212 insertions(+)
> >  create mode 100644 include/dt-bindings/pinctrl/sppctl-sp7021.h
> >  create mode 100644 include/dt-bindings/pinctrl/sppctl.h
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS index fd82c77..da6378f 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -14873,6 +14873,7 @@ L:	linux-arm-kernel@xxxxxxxxxxxxxxxxxxx (moderated for
> non-subscribers)
> >  S:	Maintained
> >  W:	https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
> >  F:	drivers/pinctrl/sunplus/
> > +F:	include/dt-bindings/pinctrl/sppctl*
> >
> >  PKTCDVD DRIVER
> >  M:	linux-block@xxxxxxxxxxxxxxx
> > diff --git a/include/dt-bindings/pinctrl/sppctl-sp7021.h
> > b/include/dt-bindings/pinctrl/sppctl-sp7021.h
> > new file mode 100644
> > index 0000000..4e07d03
> > --- /dev/null
> > +++ b/include/dt-bindings/pinctrl/sppctl-sp7021.h
> > @@ -0,0 +1,171 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> 
> Care about OS other than Linux? Should be dual licensed.

Yes, I'll add dual license for dt-binding header file.


> > +/*
> > + * SP7021 pinmux pinctrl bindings.
> > + * Copyright (C) Sunplus Tech/Tibbo Tech. 2020
> > + * Author: Dvorkin Dmitry <dvorkin@xxxxxxxxx>  */
> > +
> > +#ifndef _DT_BINDINGS_PINCTRL_SPPCTL_SP7021_H
> > +#define _DT_BINDINGS_PINCTRL_SPPCTL_SP7021_H
> > +
> > +#include <dt-bindings/pinctrl/sppctl.h>
> > +
> > +#define MUXF_GPIO                       0
> 
> Where do these numbers come from? Hopefully they correspond to register offsets and aren't
> made up. A comment either way here would help.

The numbers are based on define of hardware.
SP7021 supports so-called 'fully pin-mux' function.
GPIO8 ~ GPIO71 are 'fully pin-mux' pins

For example,
If I set pin-mux register of GPIO8 to 1,
GPIO8 will output L2SW_CLK_OUT signal.

If I set pin-mux register of GPIO8 to 2,
GPIO8 will output L2SW_MAC_SMI_MDC signal.

If I set pin-mux register of GPIO8 to 7,
GPIO8 will output L2SW_MAC_SMI_DMIO signal.

In fact, all signals from number 2 to 121, 
can be selected to output to any fully 
pin-mux pins (GPIO8 ~ GPIO71).

Numbers 121 to 155 are also based on define 
of hardware. It is used to turn off specific
pin-function. With the number, drivers can
calculate the control-bit easily.


> > +#define MUXF_IOP                        1
> > +#define MUXF_L2SW_CLK_OUT               2
> > +#define MUXF_L2SW_MAC_SMI_MDC           3
> > +#define MUXF_L2SW_LED_FLASH0            4
> > +#define MUXF_L2SW_LED_FLASH1            5
> > +#define MUXF_L2SW_LED_ON0               6
> > +#define MUXF_L2SW_LED_ON1               7
> > +#define MUXF_L2SW_MAC_SMI_MDIO          8
> > +#define MUXF_L2SW_P0_MAC_RMII_TXEN      9
> > +#define MUXF_L2SW_P0_MAC_RMII_TXD0      10
> > +#define MUXF_L2SW_P0_MAC_RMII_TXD1      11
> > +#define MUXF_L2SW_P0_MAC_RMII_CRSDV     12
> > +#define MUXF_L2SW_P0_MAC_RMII_RXD0      13
> > +#define MUXF_L2SW_P0_MAC_RMII_RXD1      14
> > +#define MUXF_L2SW_P0_MAC_RMII_RXER      15
> > +#define MUXF_L2SW_P1_MAC_RMII_TXEN      16
> > +#define MUXF_L2SW_P1_MAC_RMII_TXD0      17
> > +#define MUXF_L2SW_P1_MAC_RMII_TXD1      18
> > +#define MUXF_L2SW_P1_MAC_RMII_CRSDV     19
> > +#define MUXF_L2SW_P1_MAC_RMII_RXD0      20
> > +#define MUXF_L2SW_P1_MAC_RMII_RXD1      21
> > +#define MUXF_L2SW_P1_MAC_RMII_RXER      22
> > +#define MUXF_DAISY_MODE                 23
> > +#define MUXF_SDIO_CLK                   24
> > +#define MUXF_SDIO_CMD                   25
> > +#define MUXF_SDIO_D0                    26
> > +#define MUXF_SDIO_D1                    27
> > +#define MUXF_SDIO_D2                    28
> > +#define MUXF_SDIO_D3                    29
> > +#define MUXF_PWM0                       30
> > +#define MUXF_PWM1                       31
> > +#define MUXF_PWM2                       32
> > +#define MUXF_PWM3                       33
> > +#define MUXF_PWM4                       34
> > +#define MUXF_PWM5                       35
> > +#define MUXF_PWM6                       36
> > +#define MUXF_PWM7                       37
> > +#define MUXF_ICM0_D                     38
> > +#define MUXF_ICM1_D                     39
> > +#define MUXF_ICM2_D                     40
> > +#define MUXF_ICM3_D                     41
> > +#define MUXF_ICM0_CLK                   42
> > +#define MUXF_ICM1_CLK                   43
> > +#define MUXF_ICM2_CLK                   44
> > +#define MUXF_ICM3_CLK                   45
> > +#define MUXF_SPIM0_INT                  46
> > +#define MUXF_SPIM0_CLK                  47
> > +#define MUXF_SPIM0_EN                   48
> > +#define MUXF_SPIM0_DO                   49
> > +#define MUXF_SPIM0_DI                   50
> > +#define MUXF_SPIM1_INT                  51
> > +#define MUXF_SPIM1_CLK                  52
> > +#define MUXF_SPIM1_EN                   53
> > +#define MUXF_SPIM1_DO                   54
> > +#define MUXF_SPIM1_DI                   55
> > +#define MUXF_SPIM2_INT                  56
> > +#define MUXF_SPIM2_CLK                  57
> > +#define MUXF_SPIM2_EN                   58
> > +#define MUXF_SPIM2_DO                   59
> > +#define MUXF_SPIM2_DI                   60
> > +#define MUXF_SPIM3_INT                  61
> > +#define MUXF_SPIM3_CLK                  62
> > +#define MUXF_SPIM3_EN                   63
> > +#define MUXF_SPIM3_DO                   64
> > +#define MUXF_SPIM3_DI                   65
> > +#define MUXF_SPI0S_INT                  66
> > +#define MUXF_SPI0S_CLK                  67
> > +#define MUXF_SPI0S_EN                   68
> > +#define MUXF_SPI0S_DO                   69
> > +#define MUXF_SPI0S_DI                   70
> > +#define MUXF_SPI1S_INT                  71
> > +#define MUXF_SPI1S_CLK                  72
> > +#define MUXF_SPI1S_EN                   73
> > +#define MUXF_SPI1S_DO                   74
> > +#define MUXF_SPI1S_DI                   75
> > +#define MUXF_SPI2S_INT                  76
> > +#define MUXF_SPI2S_CLK                  77
> > +#define MUXF_SPI2S_EN                   78
> > +#define MUXF_SPI2S_DO                   79
> > +#define MUXF_SPI2S_DI                   80
> > +#define MUXF_SPI3S_INT                  81
> > +#define MUXF_SPI3S_CLK                  82
> > +#define MUXF_SPI3S_EN                   83
> > +#define MUXF_SPI3S_DO                   84
> > +#define MUXF_SPI3S_DI                   85
> > +#define MUXF_I2CM0_CLK                  86
> > +#define MUXF_I2CM0_DAT                  87
> > +#define MUXF_I2CM1_CLK                  88
> > +#define MUXF_I2CM1_DAT                  89
> > +#define MUXF_I2CM2_CLK                  90
> > +#define MUXF_I2CM2_DAT                  91
> > +#define MUXF_I2CM3_CLK                  92
> > +#define MUXF_I2CM3_DAT                  93
> > +#define MUXF_UA1_TX                     94
> > +#define MUXF_UA1_RX                     95
> > +#define MUXF_UA1_CTS                    96
> > +#define MUXF_UA1_RTS                    97
> > +#define MUXF_UA2_TX                     98
> > +#define MUXF_UA2_RX                     99
> > +#define MUXF_UA2_CTS                    100
> > +#define MUXF_UA2_RTS                    101
> > +#define MUXF_UA3_TX                     102
> > +#define MUXF_UA3_RX                     103
> > +#define MUXF_UA3_CTS                    104
> > +#define MUXF_UA3_RTS                    105
> > +#define MUXF_UA4_TX                     106
> > +#define MUXF_UA4_RX                     107
> > +#define MUXF_UA4_CTS                    108
> > +#define MUXF_UA4_RTS                    109
> > +#define MUXF_TIMER0_INT                 110
> > +#define MUXF_TIMER1_INT                 111
> > +#define MUXF_TIMER2_INT                 112
> > +#define MUXF_TIMER3_INT                 113
> > +#define MUXF_GPIO_INT0                  114
> > +#define MUXF_GPIO_INT1                  115
> > +#define MUXF_GPIO_INT2                  116
> > +#define MUXF_GPIO_INT3                  117
> > +#define MUXF_GPIO_INT4                  118
> > +#define MUXF_GPIO_INT5                  119
> > +#define MUXF_GPIO_INT6                  120
> > +#define MUXF_GPIO_INT7                  121
> > +
> > +#define GROP_SPI_FLASH                  122
> > +#define GROP_SPI_FLASH_4BIT             123
> > +#define GROP_SPI_NAND                   124
> > +#define GROP_CARD0_EMMC                 125
> > +#define GROP_SD_CARD                    126
> > +#define GROP_UA0                        127
> > +#define GROP_ACHIP_DEBUG                128
> > +#define GROP_ACHIP_UA2AXI               129
> > +#define GROP_FPGA_IFX                   130
> > +#define GROP_HDMI_TX                    131
> > +#define GROP_AUD_EXT_ADC_IFX0           132
> > +#define GROP_AUD_EXT_DAC_IFX0           133
> > +#define GROP_SPDIF_RX                   134
> > +#define GROP_SPDIF_TX                   135
> > +#define GROP_TDMTX_IFX0                 136
> > +#define GROP_TDMRX_IFX0                 137
> > +#define GROP_PDMRX_IFX0                 138
> > +#define GROP_PCM_IEC_TX                 139
> > +#define GROP_LCDIF                      140
> > +#define GROP_DVD_DSP_DEBUG              141
> > +#define GROP_I2C_DEBUG                  142
> > +#define GROP_I2C_SLAVE                  143
> > +#define GROP_WAKEUP                     144
> > +#define GROP_UART2AXI                   145
> > +#define GROP_USB0_I2C                   146
> > +#define GROP_USB1_I2C                   147
> > +#define GROP_USB0_OTG                   148
> > +#define GROP_USB1_OTG                   149
> > +#define GROP_UPHY0_DEBUG                150
> > +#define GROP_UPHY1_DEBUG                151
> > +#define GROP_UPHY0_EXT                  152
> > +#define GROP_PROBE_PORT                 153
> > +#define GROP_ANA_I2C_IF                 154
> > +#define GROP_ANA_TEST_IF                155
> > +
> > +#endif
> > diff --git a/include/dt-bindings/pinctrl/sppctl.h
> > b/include/dt-bindings/pinctrl/sppctl.h
> > new file mode 100644
> > index 0000000..3e82989
> > --- /dev/null
> > +++ b/include/dt-bindings/pinctrl/sppctl.h
> > @@ -0,0 +1,40 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * SP7021 pinmux pinctrl bindings.
> > + * Copyright (C) Sunplus Tech/Tibbo Tech. 2020
> > + * Author: Dvorkin Dmitry <dvorkin@xxxxxxxxx>  */
> > +
> > +#ifndef _DT_BINDINGS_PINCTRL_SPPCTL_H #define
> > +_DT_BINDINGS_PINCTRL_SPPCTL_H
> > +
> > +#define IOP_G_MASTE             (0x01<<0)
> > +#define IOP_G_FIRST             (0x01<<1)
> > +
> > +#define SPPCTL_PCTL_G_PMUX      (0x00|IOP_G_MASTE)
> > +#define SPPCTL_PCTL_G_GPIO      (IOP_G_FIRST|IOP_G_MASTE)
> > +#define SPPCTL_PCTL_G_IOPP      (IOP_G_FIRST|0x00)
> > +
> > +#define SPPCTL_PCTL_L_OUT       (0x01<<0)
> > +#define SPPCTL_PCTL_L_OU1       (0x01<<1)
> > +#define SPPCTL_PCTL_L_INV       (0x01<<2)
> > +#define SPPCTL_PCTL_L_ONV       (0x01<<3)
> > +#define SPPCTL_PCTL_L_ODR       (0x01<<4)
> > +
> > +#define SPPCTL_PCTLE_P(v)       ((v)<<24)
> > +#define SPPCTL_PCTLE_G(v)       ((v)<<16)
> > +#define SPPCTL_PCTLE_F(v)       ((v)<<8)
> > +#define SPPCTL_PCTLE_L(v)       ((v)<<0)
> > +
> > +#define SPPCTL_PCTLD_P(v)       (((v)>>24) & 0xFF)
> > +#define SPPCTL_PCTLD_G(v)       (((v)>>16) & 0xFF)
> > +#define SPPCTL_PCTLD_F(v)       (((v) >> 8) & 0xFF)
> > +#define SPPCTL_PCTLD_L(v)       (((v) >> 0) & 0xFF)
> > +
> > +/*
> > + * pack into 32-bit value:
> > + * pin#{8bit}, typ{8bit}, function{8bit}, flags{8bit}  */ #define
> > +SPPCTL_IOPAD(pin, typ, fun, fls)
> > +(((pin)<<24)|((typ)<<16)|((fun)<<8)|(fls))
> > +
> > +#endif
> > --
> > 2.7.4
> >
> >
[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux