[RFC PATCH v4 net-next 20/23] net: dsa: seville: name change for clarity from pcs to mdio_device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A simple variable update from "pcs" to "mdio_device" for the mdio device
will make things a little cleaner.

Signed-off-by: Colin Foster <colin.foster@xxxxxxxxxxxxxxxx>
---
 drivers/net/dsa/ocelot/seville_vsc9953.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c
index 49fc8220d636..268c09042824 100644
--- a/drivers/net/dsa/ocelot/seville_vsc9953.c
+++ b/drivers/net/dsa/ocelot/seville_vsc9953.c
@@ -1027,7 +1027,7 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot)
 	for (port = 0; port < felix->info->num_ports; port++) {
 		struct ocelot_port *ocelot_port = ocelot->ports[port];
 		struct phylink_pcs *phylink_pcs;
-		struct mdio_device *pcs;
+		struct mdio_device *mdio_device;
 		int addr = port + 4;
 
 		if (dsa_is_unused_port(felix->ds, port))
@@ -1036,13 +1036,13 @@ static int vsc9953_mdio_bus_alloc(struct ocelot *ocelot)
 		if (ocelot_port->phy_mode == PHY_INTERFACE_MODE_INTERNAL)
 			continue;
 
-		pcs = mdio_device_create(felix->imdio, addr);
+		mdio_device = mdio_device_create(felix->imdio, addr);
 		if (IS_ERR(pcs))
 			continue;
 
-		phylink_pcs = lynx_pcs_create(pcs);
+		phylink_pcs = lynx_pcs_create(mdio_device);
 		if (!phylink_pcs) {
-			mdio_device_free(pcs);
+			mdio_device_free(mdio_device);
 			continue;
 		}
 
-- 
2.25.1




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux