Re: [PATCH v2 3/3] devicetree: bindings: pinctrl: Add bindings doc for Sunplus SP7021.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

On Mon, Nov 01, 2021 at 04:11:17PM +0800, Wells Lu wrote:
> Add bindings documentation for Sunplus SP7021.

Patch 2 and 3 can be combined. Use consistent subjects. Patch 2 is good. 
This one is not.

> 
> Signed-off-by: Wells Lu <wells.lu@xxxxxxxxxxx>
> ---
> Changes in v2:
>  - None
> 
>  .../bindings/pinctrl/sunplus,sp7021-pinctrl.yaml   | 277 +++++++++++++++++++++
>  MAINTAINERS                                        |   1 +
>  2 files changed, 278 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
> new file mode 100644
> index 0000000..7cfa0ce
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
> @@ -0,0 +1,277 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) Sunplus Co., Ltd. 2021
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/sunplus,sp7021-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sunplus SP7021 Pin Controller Device Tree Bindings
> +
> +maintainers:
> +  - Dvorkin Dmitry <dvorkin@xxxxxxxxx>
> +  - Wells Lu <wells.lu@xxxxxxxxxxx>
> +
> +description: |
> +  The Sunplus SP7021 pin controller is used to control SoC pins. Please
> +  refer to pinctrl-bindings.txt in this directory for details of the common
> +  pinctrl bindings used by client devices.
> +
> +  Refer to https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/pages/
> +  1443495991/How+to+setup+pins+of+SP7021+in+device-tree+source
> +
> +  The device node of pin controller of Sunplus SP7021 has following
> +  properties.
> +
> +properties:
> +  compatible:
> +    const: sunplus,sp7021-pctl
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    const: 2
> +
> +  reg:
> +    items:
> +      - description: Base address and length of the MOON2 registers.
> +      - description: Base address and length of the GPIOXT registers.
> +      - description: Base address and length of the GPIOXT2 registers.
> +      - description: Base address and length of the FIRST registers.
> +      - description: Base address and length of the MOON1 registers.
> +
> +  clocks:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +patternProperties:
> +  '^.*$':
> +    if:
> +      type: object
> +    then:

For new bindings, don't use this hack. Make the node name something you 
can match on (e.g. '-pins$').

> +      description: |
> +        A pinctrl node should contain at least one subnodes representing the
> +        pins or function-pins group available on the machine. Each subnode
> +        will list the pins it needs, and how they should be configured.
> +
> +        Pinctrl node's client devices use subnodes for desired pin
> +        configuration. Client device subnodes use below standard properties.
> +
> +      properties:
> +        pins:
> +          description: |
> +            Define pins which are used by pinctrl node's client device.
> +
> +            It consists of one or more integers which represents the config
> +            setting for corresponding pin. Please use macro SPPCTL_IOPAD to
> +            define the integers for pins.
> +
> +            The first argument of the macro is pin number, the second is pin
> +            type, the third is type of GPIO, the last is default output state
> +            of GPIO.
> +          $ref: /schemas/types.yaml#/definitions/uint32-array
> +
> +        function:
> +          description: |
> +            Define pin-function which is used by pinctrl node's client device.
> +            The name should be one of string in the following enumeration.
> +          $ref: "/schemas/types.yaml#/definitions/string"
> +          enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI_NAND, CARD0_EMMC, SD_CARD,
> +                  UA0, FPGA_IFX, HDMI_TX, LCDIF, USB0_OTG, USB1_OTG ]
> +
> +        groups:
> +          description: |
> +            Define pin-group in a specified pin-function.
> +            The name should be one of string in the following enumeration.
> +          $ref: "/schemas/types.yaml#/definitions/string"
> +          enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FLASH_4BIT1, SPI_FLASH_4BIT2,
> +                  SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX1,
> +                  HDMI_TX2, HDMI_TX3, LCDIF, USB0_OTG, USB1_OTG ]
> +
> +        zero_func:
> +          description: |
> +            Disabled pins which are not used by pinctrl node's client device.
> +          $ref: /schemas/types.yaml#/definitions/uint32-array
> +
> +      additionalProperties: false
> +
> +      allOf:
> +        - if:
> +            properties:
> +              function:
> +                enum:
> +                  - SPI_FLASH
> +          then:
> +            properties:
> +              groups:
> +                enum:
> +                  - SPI_FLASH1
> +                  - SPI_FLASH2
> +        - if:
> +            properties:
> +              function:
> +                enum:
> +                  - SPI_FLASH_4BIT
> +          then:
> +            properties:
> +              groups:
> +                enum:
> +                  - SPI_FLASH_4BIT1
> +                  - SPI_FLASH_4BIT2
> +        - if:
> +            properties:
> +              function:
> +                enum:
> +                  - SPI_NAND
> +          then:
> +            properties:
> +              groups:
> +                enum:
> +                  - SPI_NAND
> +        - if:
> +            properties:
> +              function:
> +                enum:
> +                  - CARD0_EMMC
> +          then:
> +            properties:
> +              groups:
> +                enum:
> +                  - CARD0_EMMC
> +        - if:
> +            properties:
> +              function:
> +                enum:
> +                  - SD_CARD
> +          then:
> +            properties:
> +              groups:
> +                enum:
> +                  - SD_CARD
> +        - if:
> +            properties:
> +              function:
> +                enum:
> +                  - UA0
> +          then:
> +            properties:
> +              groups:
> +                enum:
> +                  - UA0
> +        - if:
> +            properties:
> +              function:
> +                enum:
> +                  - FPGA_IFX
> +          then:
> +            properties:
> +              groups:
> +                enum:
> +                  - FPGA_IFX
> +        - if:
> +            properties:
> +              function:
> +                enum:
> +                  - HDMI_TX
> +          then:
> +            properties:
> +              groups:
> +                enum:
> +                  - HDMI_TX1
> +                  - HDMI_TX2
> +                  - HDMI_TX3
> +        - if:
> +            properties:
> +              function:
> +                enum:
> +                  - LCDIF
> +          then:
> +            properties:
> +              groups:
> +                enum:
> +                  - LCDIF
> +        - if:
> +            properties:
> +              function:
> +                enum:
> +                  - USB0_OTG
> +          then:
> +            properties:
> +              groups:
> +                enum:
> +                  - USB0_OTG
> +        - if:
> +            properties:
> +              function:
> +                enum:
> +                  - USB1_OTG
> +          then:
> +            properties:
> +              groups:
> +                enum:
> +                  - USB1_OTG
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#gpio-cells"
> +  - gpio-controller
> +  - clocks
> +  - resets
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/sp-sp7021.h>
> +    #include <dt-bindings/reset/sp-sp7021.h>
> +    #include <dt-bindings/pinctrl/sppctl-sp7021.h>
> +
> +    pctl: pctl@9C000100 {

pinctl@9c000100

> +        compatible = "sunplus,sp7021-pctl";
> +        reg = <0x9C000100 0x100>, <0x9C000300 0x80>, <0x9C000380 0x80>,
> +              <0x9C0032e4 0x1C>, <0x9C000080 0x20>;
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +        clocks = <&clkc GPIO>;
> +        resets = <&rstc RST_GPIO>;
> +
> +        pins_uart0: pins_uart0 {
> +            function = "UA0";
> +            groups = "UA0";
> +        };
> +
> +        pins_uart1: pins_uart1 {
> +            pins = <
> +                SPPCTL_IOPAD(11,SPPCTL_PCTL_G_PMUX,MUXF_UA1_TX,0)
> +                SPPCTL_IOPAD(10,SPPCTL_PCTL_G_PMUX,MUXF_UA1_RX,0)
> +                SPPCTL_IOPAD(7,SPPCTL_PCTL_G_GPIO,0,SPPCTL_PCTL_L_OUT)
> +            >;
> +        };
> +
> +        emmc_mux: emmc_mux {
> +            function = "CARD0_EMMC";
> +            groups = "CARD0_EMMC";
> +        };
> +
> +        mmc1_mux: mmc1_mux {
> +            function = "SD_CARD";
> +            groups = "SD_CARD";
> +            pins = < SPPCTL_IOPAD(91,SPPCTL_PCTL_G_GPIO,0,0) >;
> +        };
> +
> +        hdmi_A_tx1: hdmi_A_tx1_pins {
> +            function = "HDMI_TX";
> +            groups = "HDMI_TX1";
> +        };
> +        hdmi_A_tx2: hdmi_A_tx2_pins {
> +            function = "HDMI_TX";
> +            groups = "HDMI_TX2";
> +        };
> +        hdmi_A_tx3: hdmi_A_tx3_pins {
> +            function = "HDMI_TX";
> +            groups = "HDMI_TX3";
> +        };
> +    };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index da6378f..11835e7 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14872,6 +14872,7 @@ M:	Wells Lu <wells.lu@xxxxxxxxxxx>
>  L:	linux-arm-kernel@xxxxxxxxxxxxxxxxxxx (moderated for non-subscribers)
>  S:	Maintained
>  W:	https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
> +F:	Documentation/devicetree/bindings/pinctrl/sunplus,*
>  F:	drivers/pinctrl/sunplus/
>  F:	include/dt-bindings/pinctrl/sppctl*
>  
> -- 
> 2.7.4
> 
>
[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux