Re: [PATCH v2 5/8] gpiolib: shrink further

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 9, 2021 at 12:18 PM Arnd Bergmann <arnd@xxxxxxxxxx> wrote:

> Ideally we should only use linux/gpio/consumer.h, which is required for
> gpiod_set_debounce(). of_gpio.h is still needed for of_get_named_gpio()
> and should be taken out once we change this to gpiod_get(), while
> linux/gpio.h is still needed for gpio_is_valid()/gpio_get_value() and should
> be removed when those are changed to the gpiod_ versions.
>
> We could do an intermediate patch that converts one half of the
> interface, something like

When I convert stuff I try to go all the way when I can. It can
be a bit daring if no one is there to test changes.

The patch looks good though apart from:

> -               ts->gpio_pendown = pdata->gpio_pendown;
> +               ts->gpio_pendown = gpio_to_desc(pdata->gpio_pendown);

I usually even go into the defined platform data and try to convert
the boardfile to use a descriptor table so this is never needed.
(But, more work.)

Examples:
git log -p --author=Walleij arch/arm/mach-pxa/

> -       pdata->gpio_pendown = of_get_named_gpio(dev->of_node,
> "pendown-gpio", 0);
> +       ts->gpio_pendown = gpiod_get(dev, "pendown-gpio", GPIOD_IN);

Needs to be just gpiod_get(dev, "pendown", GPIOD_IN); the new
API tries the "-gpio[s]" suffixes when going into the device tree.

Yours,
Linus Walleij



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux