On 11/1/21 10:41 PM, Bjorn Andersson wrote:
It has been observed that dual edge triggered wakeirq GPIOs on SDM845
doesn't trigger interrupts on the falling edge.
Enabling wakeirq_dual_edge_errata for SDM845 indicates that the PDC in
SDM845 suffers from the same problem described, and worked around, by
Doug in 'c3c0c2e18d94 ("pinctrl: qcom: Handle broken/missing PDC dual
edge IRQs on sc7180")', so enable the workaround for SDM845 as well.
The specific problem seen without this is that gpio-keys does not detect
the falling edge of the LID gpio on the Lenovo Yoga C630 and as such
consistently reports the LID as closed.
Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy")
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
drivers/pinctrl/qcom/pinctrl-sdm845.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-sdm845.c b/drivers/pinctrl/qcom/pinctrl-sdm845.c
index c51793f6546f..fdfd7b8f3a76 100644
--- a/drivers/pinctrl/qcom/pinctrl-sdm845.c
+++ b/drivers/pinctrl/qcom/pinctrl-sdm845.c
@@ -1310,6 +1310,7 @@ static const struct msm_pinctrl_soc_data sdm845_pinctrl = {
.ngpios = 151,
.wakeirq_map = sdm845_pdc_map,
.nwakeirq_map = ARRAY_SIZE(sdm845_pdc_map),
+ .wakeirq_dual_edge_errata = true,
};
static const struct msm_pinctrl_soc_data sdm845_acpi_pinctrl = {
Tested here with a number of suspend cycles, works as expected now.
Thank you so much!
Tested-By: Steev Klimaszewski <steev@xxxxxxxx>
