[PATCH v3 2/2] pinctrl: microchip sgpio: use reset driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On lan966x platform when the switch gets reseted then also the sgpio
gets reseted. The fix for this is to extend also the sgpio driver to
call the reset driver which will be reseted only once by the first
driver that is probed.

Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
---
 drivers/pinctrl/pinctrl-microchip-sgpio.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c
index 072bccdea2a5..e8a91d0824cb 100644
--- a/drivers/pinctrl/pinctrl-microchip-sgpio.c
+++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c
@@ -17,6 +17,7 @@
 #include <linux/pinctrl/pinmux.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
+#include <linux/reset.h>
 
 #include "core.h"
 #include "pinconf.h"
@@ -803,6 +804,7 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
 	int div_clock = 0, ret, port, i, nbanks;
 	struct device *dev = &pdev->dev;
 	struct fwnode_handle *fwnode;
+	struct reset_control *reset;
 	struct sgpio_priv *priv;
 	struct clk *clk;
 	u32 val;
@@ -813,6 +815,10 @@ static int microchip_sgpio_probe(struct platform_device *pdev)
 
 	priv->dev = dev;
 
+	reset = devm_reset_control_get_shared(&pdev->dev, "switch");
+	if (!IS_ERR(reset))
+		reset_control_reset(reset);
+
 	clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(clk))
 		return dev_err_probe(dev, PTR_ERR(clk), "Failed to get clock\n");
-- 
2.33.0




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux