This series adds support for the StarFive JH7100 RISC-V SoC. The SoC has many devices that needs non-coherent dma operations to work which isn't upstream yet[1], so this just adds basic support to boot up, get a serial console, blink an LED and reboot itself. Unlike the Allwinner D1 this chip doesn't use any extra pagetable bits, but instead the DDR RAM appears twice in the memory map, with and without the cache. The JH7100 is a test chip for the upcoming JH7110 and about 300 BeagleV Starlight Beta boards were sent out with them as part of a now cancelled BeagleBoard.org project. However StarFive has produced more of the JH7100s and more boards will be available[2] to buy. Hopefully before the end of the year. This series is also available at https://github.com/esmil/linux/commits/starlight-minimal ..but a more complete kernel including non-coherent dma operations can be found at https://github.com/starfive-tech/linux/tree/starlight /Emil [1]: https://lore.kernel.org/linux-riscv/20210723214031.3251801-2-atish.patra@xxxxxxx/ [2]: https://www.linkedin.com/pulse/starfive-release-open-source-single-board-platform-q3-2021-starfive/ Emil Renner Berthing (12): RISC-V: Add StarFive SoC Kconfig option dt-bindings: timer: Add StarFive JH7100 clint dt-bindings: interrupt-controller: Add StarFive JH7100 plic dt-bindings: reset: Add Starfive JH7100 reset bindings reset: starfive-jh7100: Add StarFive JH7100 reset driver dt-bindings: pinctrl: Add StarFive pinctrl definitions dt-bindings: pinctrl: Add StarFive JH7100 bindings pinctrl: starfive: Add pinctrl driver for StarFive SoCs dt-bindings: serial: snps-dw-apb-uart: Add JH7100 uarts serial: 8250_dw: Add skip_clk_set_rate quirk RISC-V: Add initial StarFive JH7100 device tree RISC-V: Add BeagleV Starlight Beta device tree Geert Uytterhoeven (4): dt-bindings: clock: starfive: Add JH7100 clock definitions dt-bindings: clock: starfive: Add JH7100 bindings clk: starfive: Add JH7100 clock generator driver dt-bindings: reset: Add StarFive JH7100 reset definitions .../clock/starfive,jh7100-clkgen.yaml | 56 + .../sifive,plic-1.0.0.yaml | 1 + .../pinctrl/starfive,jh7100-pinctrl.yaml | 274 ++++ .../bindings/reset/starfive,jh7100-reset.yaml | 38 + .../bindings/serial/snps-dw-apb-uart.yaml | 5 + .../bindings/timer/sifive,clint.yaml | 1 + MAINTAINERS | 22 + arch/riscv/Kconfig.socs | 8 + arch/riscv/boot/dts/Makefile | 1 + arch/riscv/boot/dts/starfive/Makefile | 2 + .../dts/starfive/jh7100-beaglev-starlight.dts | 162 ++ arch/riscv/boot/dts/starfive/jh7100.dtsi | 228 +++ drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/starfive/Kconfig | 10 + drivers/clk/starfive/Makefile | 3 + drivers/clk/starfive/clk-starfive-jh7100.c | 769 +++++++++ drivers/pinctrl/Kconfig | 17 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-starfive.c | 1439 +++++++++++++++++ drivers/reset/Kconfig | 8 + drivers/reset/Makefile | 1 + drivers/reset/reset-starfive-jh7100.c | 164 ++ drivers/tty/serial/8250/8250_dw.c | 32 +- include/dt-bindings/clock/starfive-jh7100.h | 202 +++ .../dt-bindings/pinctrl/pinctrl-starfive.h | 274 ++++ include/dt-bindings/reset/starfive-jh7100.h | 126 ++ 27 files changed, 3833 insertions(+), 13 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml create mode 100644 Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml create mode 100644 arch/riscv/boot/dts/starfive/Makefile create mode 100644 arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts create mode 100644 arch/riscv/boot/dts/starfive/jh7100.dtsi create mode 100644 drivers/clk/starfive/Kconfig create mode 100644 drivers/clk/starfive/Makefile create mode 100644 drivers/clk/starfive/clk-starfive-jh7100.c create mode 100644 drivers/pinctrl/pinctrl-starfive.c create mode 100644 drivers/reset/reset-starfive-jh7100.c create mode 100644 include/dt-bindings/clock/starfive-jh7100.h create mode 100644 include/dt-bindings/pinctrl/pinctrl-starfive.h create mode 100644 include/dt-bindings/reset/starfive-jh7100.h -- 2.33.0