On Fri, Oct 1, 2021 at 8:27 AM Olof Johansson <olof@xxxxxxxxx> wrote: > > On Fri, Oct 1, 2021 at 2:01 AM Arnd Bergmann <arnd@xxxxxxxx> wrote: > > > > On Fri, Oct 1, 2021 at 10:19 AM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote: > > > On Fri, Oct 1, 2021 at 7:24 AM Saravana Kannan <saravanak@xxxxxxxxxx> wrote: > > > > GIC and arch timer. Basically the minimal kernel would need a timer > > > > for the scheduler tick and IRQ controller to get the timer IRQ and the > > > > fixed clock driver if the archtimer uses one to get its frequency and > > > > the early UART console is pointless as a module (so build it in to > > > > allow debugging/development). > > > > > > > > And then all new drivers, we should make sure are implemented as > > > > tristate drivers. And we can go back and slowly work on converting > > > > existing drivers to modules (community effort -- not one person or > > > > entity) -- at least the ones where the author has hardware or ones > > > > where the change is very likely to be correct and someone else is > > > > willing to test it. We'll never be able to support some/all ARM32 (do > > > > they even have a GIC/arch timer standard?), but at least for ARM64, > > > > this seems like a viable goal. > > > > > > Cortex-A7/A15 and later have GIC and architectured timer, so it should > > > work for contemporary systems. > > > Cortex-A9 systems may have GIC, and TWD and/or Global Timer (but I've > > > seen SoCs where the interrupt for the latter was not wired :-(. > > > > There are a number of well-known examples even with 64-bit chips or > > Cortex-A7/A15 based SoCs that can't use the architected timer, > > irqchip or iommu. > > > > Apple M1, Broadcom BCM283x, Samsung Exynos5 and > > some Hisilicon server parts come to mind, I'm sure there > > are more. > > There's also more and more movement towards having coprocessors with > standardized interfaces dealing with this functionality. We're > currently at the point where they have coprocessors with > non-standardized interfaces, and it's useful to keep encouraging > convergence in this area to everybody's benefit. I don't find it > particularly useful to make life easier for the custom solutions at > the expense of others like this patchset does, when that's (just > beyond? on?) the horizon. > > > > What are the plans for other architectures? > > > I've seen similar patches being applied for e.g. MIPS. > > > > There is some work in the more actively maintained MIPS > > platforms to make those behave more like Arm/powerpc/riscv/m68k > > platforms, using a single image and moving drivers into modules. > > Most MIPS platforms seem unlikely to get updated to this, > > and will continue to require a SoC specific kernel binary forever, > > similar to the renesas superh platforms. Most of the less > > common architectures (arc, csky, hexagon, nios2, xtensa, > > microblaze, nds32, openrisc, sparc/leon) are way behind that > > though, and generally don't work at all without out-of-tree > > code. > > One of the arguments for needing some of these core drivers in-kernel > is that some platforms boot at very conservative DVFS operating > points, to a degree that you really want to turn up the CPU clocks > fairly early during boot. > > If you don't have the drivers built-in, you can't do that and/or you > create possible fragile or awkward inter-module dependencies with > deferred probing, etc. We do care about boot time enough to prefer to > just build them in for this reason. Go look at a Pixel 5, we got this working just fine with all these drivers as modules and we definitely care about boot time. You just need to load your CPU freq driver and the other ones it needs early on. And with fw_devlink=on (default in upstream), there's hardly any deferred probing. > If vmlinux binary size is a concern, maybe it's time to consider > splitting the drivers into a bare-minimum piece that's not a module > for early setup, and the rest that can be loaded post-boot. Isn't this literally what I was suggesting with my ARM64_MINIMAL_GENERIC_KERNEL suggestion? Build in all the bare minimum drivers that are needed before module loading can happen? You'd just select them all under that config. And any existing platform that wants to use it would break up their drivers into modules and switch to it. -Saravana