This updates bindings for MT7986 pinctrl driver. The difference of pinctrl between mt7986a and mt7986b is that pin-41 to pin-65 do not exist on mt7986b Signed-off-by: Sam Shih <sam.shih@xxxxxxxxxxxx> --- v5 : fixed yamllint warnings/errors v4 : used yaml format instead of txt format document v3 : make mt7986 pinctrl bindings as a separate file v2 : deleted the redundant description of mt7986a/mt7986b --- .../pinctrl/mediatek,mt7986-pinctrl.yaml | 353 ++++++++++++++++++ 1 file changed, 353 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml new file mode 100644 index 000000000000..51a13129bcb8 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml @@ -0,0 +1,353 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7986-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT7986 Pin Controller Device Tree Bindings + +maintainers: + - Sean Wang <sean.wang@xxxxxxxxxx> + +description: |+ + The MediaTek's MT7986 Pin controller is used to control SoC pins. + +properties: + compatible: + enum: + - mediatek,mt7986a-pinctrl + - mediatek,mt7986b-pinctrl + + reg: + minItems: 8 + maxItems: 8 + + reg-names: + items: + - const: gpio_base + - const: iocfg_rt_base + - const: iocfg_rb_base + - const: iocfg_lt_base + - const: iocfg_lb_base + - const: iocfg_tr_base + - const: iocfg_tl_base + - const: eint + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + Number of cells in GPIO specifier. Since the generic GPIO + binding is used, the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. + + interrupt-controller: true + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + +required: + - compatible + - reg + - reg-names + - gpio-controller + - "#gpio-cells" + +patternProperties: + '-[0-9]+$': + type: object + additionalProperties: false + + patternProperties: + 'mux': + type: object + additionalProperties: false + description: | + pinmux configuration nodes. + + Valid value function pins (in pin#) + --------------------------------------------------------------------- + "watchdog" "watchdog" 0 + "wifi_led" "led" 1, 2 + "i2c" "i2c" 3, 4 + "uart1_0" "uart" 7, 8, 9, 10 + "pcie_clk" "pcie" 9 + "pcie_wake" "pcie" 10 + "spi1_0" "spi" 11, 12, 13, 14 + "pwm1_1" "pwm" 20, + "pwm0" "pwm" 21, + "pwm1_0" "pwm" 22, + "snfi" "flash" 23, 24, 25, 26, 27, 28 + "spi1_2" "spi" 29, 30, 31, 32 + "emmc_45" "emmc" 22, 23, 24, 25, 26, 27, 28, 29, 30, + 31, 32 + "spi1_1" "spi" 23, 24, 25, 26 + "uart1_2" "uart" 29, 30, 31, 32 + "uart1_1" "uart" 23, 24, 25, 26 + "uart2_0" "uart" 29, 30, 31, 32 + "spi0" "spi" 33, 34, 35, 36 + "spi0_wp_hold" "spi" 37, 38 + "uart1_3_rx_tx" "uart" 35, 36 + "uart1_3_cts_rts" "uart" 37, 38 + "uart2_1" "uart" 33, 34, 35, 36 + "spi1_3" "spi" 33, 34, 35, 36 + "uart0" "uart" 39, 40 + "pcie_pereset" "pcie" 41 + "uart1" "uart" 42, 43, 44, 45 + "uart2" "uart" 46, 47, 48, 49 + "emmc_51" "emmc" 50, 51, 52, 53, 54, 55, 56, 57, 57, + 59, 60, 61 + "pcm" "audio" 62, 63, 64, 65 + "i2s" "audio" 62, 63, 64, 65 + "switch_int" "eth" 66 + "mdc_mdio" "eth" 67 + + $ref: "/schemas/pinctrl/pinmux-node.yaml" + properties: + function: + description: | + A string containing the name of the function to mux to the group. + There is no "audio", "pcie" functions on mt7986b, you can only use + those functions on mt7986a. + enum: [audio, emmc, eth, i2c, led, flash, pcie, pwm, spi, uart, + watchdog, wifi] + groups: + description: | + An array of strings. Each string contains the name of a group. + There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm", + and "i2s" groups on mt7986b, you can only use those groups on + mt7986a. + required: + - function + - groups + + allOf: + - if: + properties: + function: + const: audio + then: + properties: + groups: + enum: [pcm, i2s] + - if: + properties: + function: + const: emmc + then: + properties: + groups: + enum: [emmc, emmc_rst] + - if: + properties: + function: + const: eth + then: + properties: + groups: + enum: [switch_int, mdc_mdio] + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c] + - if: + properties: + function: + const: led + then: + properties: + groups: + enum: [wifi_led] + - if: + properties: + function: + const: flash + then: + properties: + groups: + enum: [snfi] + - if: + properties: + function: + const: pcie + then: + properties: + groups: + enum: [pcie_clk, pcie_wake, pcie_pereset] + - if: + properties: + function: + const: pwm + then: + properties: + groups: + enum: [pwm0, pwm1_0, pwm1_1] + - if: + properties: + function: + const: spi + then: + properties: + groups: + enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3] + - if: + properties: + function: + const: uart + then: + properties: + groups: + enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx, + uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2] + - if: + properties: + function: + const: watchdog + then: + properties: + groups: + enum: [watchdog] + - if: + properties: + function: + const: wifi + then: + properties: + groups: + enum: [wf_2g, wf_5g, wf_dbdc] + 'conf': + type: object + additionalProperties: false + description: | + pinconf configuration nodes. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: | + An array of strings. Each string contains the name of a pin. + There is no PIN 41 to PIN 65 above on mt7686b, you can only use + those pins on mt7986a. + enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0, + GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7, + GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14, + GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS, + SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS, + SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP, + UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD, + UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS, + UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2, + EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6, + EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX, + PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO, + WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK, + WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0, + WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9, + WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ, + WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3, + WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7, + WF1_HB8] + + bias-disable: true + + bias-pull-up: true + + bias-pull-down: true + + input-enable: true + + input-disable: true + + output-enable: true + + output-low: true + + output-high: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + mediatek,pull-up-adv: + description: | + Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' + Pull up setings for 2 pull resistors, R0 and R1. Valid arguments + are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,pull-down-adv: + description: | + Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3' + Pull down setings for 2 pull resistors, R0 and R1. Valid arguments + are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + required: + - pins + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + pio: pinctrl@1001f000 { + compatible = "mediatek,mt7986a-pinctrl"; + reg = <0 0x1001f000 0 0x1000>, + <0 0x11c30000 0 0x1000>, + <0 0x11c40000 0 0x1000>, + <0 0x11e20000 0 0x1000>, + <0 0x11e30000 0 0x1000>, + <0 0x11f00000 0 0x1000>, + <0 0x11f10000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base", + "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base", + "iocfg_tl_base", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 100>; + interrupt-controller; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + + uart1_pins: uart1-pins-42-to-45 { + mux { + function = "uart"; + groups = "uart1"; + }; + }; + + uart2_pins: uart1-pins-46-to-49 { + mux { + function = "uart"; + groups = "uart2"; + }; + }; + + }; + }; -- 2.29.2
[v5,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [v5,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC
- From: Sam Shih <sam.shih@xxxxxxxxxxxx>
- Date: Mon, 27 Sep 2021 10:34:19 +0800
- In-reply-to: <1632491961.645727.1195978.nullmailer@robh.at.kernel.org>
- References: <1632491961.645727.1195978.nullmailer@robh.at.kernel.org>
- Follow-Ups:
- Re: [v5,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC
- From: Rob Herring
- Re: [v5,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC
- References:
- Re: [v4,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC
- From: Rob Herring
- Re: [v4,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC
- Prev by Date: Re: 5.15-rc2 panics on boot on RK3288 veyron speedy, seems related to rockchip pinctrl / gpio split
- Next by Date: Re: [PATCH v1 1/1] pinctrl: add pinctrl/GPIO driver for Apple SoCs
- Previous by thread: Re: [v4,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC
- Next by thread: Re: [v5,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC
- Index(es):
 |