Re: [PATCH V5 2/2] arm64: dts: sc7280: Add volume up support for sc7280-idp

[Stephen Boyd <swboyd@xxxxxxxxxxxx>]

Quoting Satya Priya (2021-09-16 06:21:38)
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index 371a2a9..cbbb0ee 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -12,6 +12,26 @@
>  #include "pm8350c.dtsi"
>  #include "pmk8350.dtsi"
>
> +/ {
> +       gpio-keys {
> +               compatible = "gpio-keys";
> +               label = "gpio-keys";
> +
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&key_vol_up_default>;
> +
> +               volume-up {
> +                       label = "volume_up";
> +                       gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
> +                       linux,input-type = <1>;
> +                       linux,code = <KEY_VOLUMEUP>;

Is there an include for this define? Looks like
<dt-bindings/input/input.h> should be added as well? Did you try
compiling?

> +                       gpio-key,wakeup;
> +                       debounce-interval = <15>;
> +                       linux,can-disable;
> +               };
> +       };
> +};
> +
>  &apps_rsc {
>         pm7325-regulators {
>                 compatible = "qcom,pm7325-rpmh-regulators";
> @@ -284,6 +304,17 @@
>
>  /* PINCTRL - additions to nodes defined in sc7280.dtsi */
>
> +&pm7325_gpios {
> +       key_vol_up_default: key-vol-up-default {
> +               pins = "gpio6";
> +               function = "normal";
> +               input-enable;
> +               bias-pull-up;
> +               power-source = <0>;
> +               qcom,drive-strength = <3>;
> +       };
> +};
> +
>  &qup_uart5_default {
>         tx {
>                 pins = "gpio46";
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>