From: Lakshmi Sowjanya D <lakshmi.sowjanya.d@xxxxxxxxx> Add a flag for event count and an extended structure to capture the event count when the flag is enabled. Intel(R) PMC Timed I/O device has an event count register counting the number of missed input edges. The register interface captures the event count and timestamp of the last event. For an event rate exceeding the rate that software can read events, the software can use the missed event count to calculate average event rates. The application requests one or both rising and falling edges when initializing the interface. The count of the selected edge type is optionally selected with an added event type flag. The event count is returned in an extended buffer using the read() interface. Co-developed-by: Christopher Hall <christopher.s.hall@xxxxxxxxx> Signed-off-by: Christopher Hall <christopher.s.hall@xxxxxxxxx> Signed-off-by: Tamal Saha <tamal.saha@xxxxxxxxx> Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@xxxxxxxxx> Reviewed-by: Mark Gross <mgross@xxxxxxxxxxxxxxx> --- drivers/gpio/gpiolib-cdev.c | 28 +++++++++++++++++++--------- include/linux/gpio/driver.h | 1 + include/uapi/linux/gpio.h | 12 ++++++++++++ 3 files changed, 32 insertions(+), 9 deletions(-) diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c index 1df28a71f88b..3b5719d5e2dc 100644 --- a/drivers/gpio/gpiolib-cdev.c +++ b/drivers/gpio/gpiolib-cdev.c @@ -518,7 +518,8 @@ struct linereq { GPIO_V2_LINE_DRIVE_FLAGS | \ GPIO_V2_LINE_EDGE_FLAGS | \ GPIO_V2_LINE_FLAG_EVENT_CLOCK_REALTIME | \ - GPIO_V2_LINE_BIAS_FLAGS) + GPIO_V2_LINE_BIAS_FLAGS | \ + GPIO_V2_LINE_FLAG_EVENT_COUNT) static void linereq_put_event(struct linereq *lr, struct gpio_v2_line_event *le) @@ -1252,10 +1253,14 @@ static ssize_t linereq_read(struct file *file, struct linereq *lr = file->private_data; struct gpioevent_poll_data poll_data; struct gpio_v2_line_event le; + size_t min_userbuf_size; ssize_t bytes_read = 0; int ret, offset; - if (count < sizeof(le)) + min_userbuf_size = sizeof(le); + min_userbuf_size += lr->lines[0].eflags & GPIO_V2_LINE_FLAG_EVENT_COUNT ? + sizeof(struct gpio_v2_line_event_ext) : 0; + if (count < min_userbuf_size) return -EINVAL; /* Without an IRQ, we can only poll */ @@ -1270,12 +1275,17 @@ static ssize_t linereq_read(struct file *file, lr->lines[offset].eflags, &poll_data); if (ret) return ret; - event = kzalloc(sizeof(*event), GFP_KERNEL); + event = kzalloc(min_userbuf_size, GFP_KERNEL); event->timestamp_ns = poll_data.timestamp; event->id = poll_data.id; - if (copy_to_user(buf, (void *)&event, sizeof(event))) - return -EFAULT; - return sizeof(event); + if (lr->lines[offset].eflags & GPIO_V2_LINE_FLAG_EVENT_COUNT) + event->ext[0].event_count = poll_data.event_count; + + ret = copy_to_user(buf, (void *)event, min_userbuf_size); + if (ret) + ret = -EFAULT; + kfree(event); + return ret ? ret : min_userbuf_size; } do { @@ -1396,7 +1406,7 @@ static int setup_input(struct linereq *lr, struct gpio_v2_line_config *lc, ret = edge_detector_setup(&lr->lines[line_no], lc, line_no, lflags & GPIO_V2_LINE_EDGE_FLAGS); if (ret < 0) { - if (ret != -ENXIO) { + if (ret == -ENXIO) { if (lr->gdev->chip->setup_poll && lr->gdev->chip->setup_poll(lr->gdev->chip, offset, &lflags) == 0 && @@ -1513,7 +1523,7 @@ static int linereq_create(struct gpio_device *gdev, void __user *ip) goto out_free_linereq; } - file_flags = O_RDONLY | O_CLOEXEC; + file_flags = O_CLOEXEC; file_flags |= output ? O_WRONLY : O_RDONLY; file_flags |= (!output && !lr->lines[i].irq) ? O_NONBLOCK : 0; @@ -1524,7 +1534,7 @@ static int linereq_create(struct gpio_device *gdev, void __user *ip) offset); } - fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC); + fd = get_unused_fd_flags(file_flags); if (fd < 0) { ret = fd; goto out_free_linereq; diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index 561e289434aa..09637fcbfd52 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -493,6 +493,7 @@ struct gpio_chip { struct gpioevent_poll_data { __u64 timestamp; __u32 id; + __u32 event_count; }; struct gpio_output_event_data { diff --git a/include/uapi/linux/gpio.h b/include/uapi/linux/gpio.h index c39efc459b9f..e7fff2a205ec 100644 --- a/include/uapi/linux/gpio.h +++ b/include/uapi/linux/gpio.h @@ -80,6 +80,7 @@ enum gpio_v2_line_flag { GPIO_V2_LINE_FLAG_BIAS_PULL_DOWN = _BITULL(9), GPIO_V2_LINE_FLAG_BIAS_DISABLED = _BITULL(10), GPIO_V2_LINE_FLAG_EVENT_CLOCK_REALTIME = _BITULL(11), + GPIO_V2_LINE_FLAG_EVENT_COUNT = _BITULL(12), }; /** @@ -270,6 +271,15 @@ enum gpio_v2_line_event_id { GPIO_V2_LINE_EVENT_UNKNOWN_EDGE = 3, }; +/** + * struct gpio_v2_line_event_ext - Extended gpio line event + * @event_count: count of events + */ +struct gpio_v2_line_event_ext { + __u32 event_count; + __u32 reserved[3]; +}; + /** * struct gpio_v2_line_event - The actual event being pushed to userspace * @timestamp_ns: best estimate of time of event occurrence, in nanoseconds. @@ -280,6 +290,7 @@ enum gpio_v2_line_event_id { * @line_seqno: the sequence number for this event in the sequence of * events on this particular line * @padding: reserved for future use + * @gpio_v2_line_event_ext: Extended gpio line event * * By default the @timestamp_ns is read from %CLOCK_MONOTONIC and is * intended to allow the accurate measurement of the time between events. @@ -296,6 +307,7 @@ struct gpio_v2_line_event { __u32 line_seqno; /* Space reserved for future use. */ __u32 padding[6]; + struct gpio_v2_line_event_ext ext[]; }; /** -- 2.17.1