Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings

[Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>]

On Thu 22 Jul 16:18 CDT 2021, quic_vamslank@xxxxxxxxxxx wrote:
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
[..]
> +'$defs':
> +  qcom-sdx65-tlmm-state:
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this subnode.
> +        items:
> +          oneOf:
> +            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$"

The last part doesn't seem right and this gives us the following
possible values gpio0-9, gpio10-99, gpio100-106 and gpio110-116.

I think the correct pattern would be:
	"^gpio([0-9]|[1-9][0-9]|10[0-9])$"


[..]
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +  - '#interrupt-cells'
> +  - gpio-controller
> +  - '#gpio-cells'
> +  - gpio-ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
> +        tlmm: pinctrl@f100000{

Please include a space between the unit address and '{'.

> +                compatible = "qcom,sdx65-tlmm";
> +                reg = <0x03000000 0xdc2000>;
> +                gpio-controller;
> +                #gpio-cells = <2>;
> +                gpio-ranges = <&tlmm 0 0 109>;
> +                interrupt-controller;
> +                #interrupt-cells = <2>;
> +                interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
> +
> +                serial-pins {
> +                        pins = "gpio8", "gpio9";
> +                        function = "blsp_uart3";
> +                        drive-strength = <2>;
> +                        bias-disable;
> +                };
> +
> +		uart-w-subnodes-state {

This line is indented with tabs, the rest with spaces.

With those changes this looks really good.

Thanks,
Bjorn