On Mon, 9 Aug 2021 at 13:43, Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxxxxx> wrote:
>
> On 06/08/2021 17:21, Sam Protsenko wrote:
> > Add Samsung Exynos850 SoC specific data to enable pinctrl support for
> > all platforms based on Exynos850.
> >
> > Signed-off-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
> > ---
> > Changes in v2:
> > - Removed .suspend/.resume callbacks, as retention registers are not
> > implemented yet for Exynos850
> > - Removed .eint_gpio_init for AUD domain, as there are no external
> > interrupts available for that domain
> >
> > .../pinctrl/samsung/pinctrl-exynos-arm64.c | 116 ++++++++++++++++++
> > drivers/pinctrl/samsung/pinctrl-exynos.h | 29 +++++
> > drivers/pinctrl/samsung/pinctrl-samsung.c | 2 +
> > drivers/pinctrl/samsung/pinctrl-samsung.h | 1 +
> > 4 files changed, 148 insertions(+)
> >
> > diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> > index b6e56422a700..3157bdf0233c 100644
> > --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> > +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> > @@ -40,6 +40,24 @@ static const struct samsung_pin_bank_type exynos5433_bank_type_alive = {
> > .reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
> > };
> >
> > +/*
> > + * Bank type for non-alive type. Bit fields:
> > + * CON: 4, DAT: 1, PUD: 4, DRV: 4, CONPDN: 2, PUDPDN: 4
> > + */
> > +static struct samsung_pin_bank_type exynos850_bank_type_off = {
> > + .fld_width = { 4, 1, 4, 4, 2, 4, },
> > + .reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, },
> > +};
> > +
> > +/*
> > + * Bank type for alive type. Bit fields:
> > + * CON: 4, DAT: 1, PUD: 4, DRV: 4
> > + */
> > +static struct samsung_pin_bank_type exynos850_bank_type_alive = {
>
> I missed that part last time - this and one before should be const.
>
> > + .fld_width = { 4, 1, 4, 4, },
> > + .reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
> > +};
> > +
> > /* Pad retention control code for accessing PMU regmap */
> > static atomic_t exynos_shared_retention_refcnt;
> >
> > @@ -422,3 +440,101 @@ const struct samsung_pinctrl_of_match_data exynos7_of_data __initconst = {
> > .ctrl = exynos7_pin_ctrl,
> > .num_ctrl = ARRAY_SIZE(exynos7_pin_ctrl),
> > };
> > +
> > +/* pin banks of exynos850 pin-controller 0 (ALIVE) */
> > +static struct samsung_pin_bank_data exynos850_pin_banks0[] = {
>
> All these as well - initconst - unless they are somehow different than
> rest of such structures?
>
> > + /* Must start with EINTG banks, ordered by EINT group number. */
> > + EXYNOS9_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
> > + EXYNOS9_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
> > + EXYNOS9_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
> > + EXYNOS9_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
> > + EXYNOS9_PIN_BANK_EINTW(4, 0x080, "gpa4", 0x10),
> > + EXYNOS9_PIN_BANK_EINTN(3, 0x0A0, "gpq0"),
> > +};
> > +
> > +/* pin banks of exynos850 pin-controller 1 (CMGP) */
> > +static struct samsung_pin_bank_data exynos850_pin_banks1[] = {
> > + /* Must start with EINTG banks, ordered by EINT group number. */
> > + EXYNOS9_PIN_BANK_EINTW(1, 0x000, "gpm0", 0x00),
> > + EXYNOS9_PIN_BANK_EINTW(1, 0x020, "gpm1", 0x04),
> > + EXYNOS9_PIN_BANK_EINTW(1, 0x040, "gpm2", 0x08),
> > + EXYNOS9_PIN_BANK_EINTW(1, 0x060, "gpm3", 0x0C),
> > + EXYNOS9_PIN_BANK_EINTW(1, 0x080, "gpm4", 0x10),
> > + EXYNOS9_PIN_BANK_EINTW(1, 0x0A0, "gpm5", 0x14),
> > + EXYNOS9_PIN_BANK_EINTW(1, 0x0C0, "gpm6", 0x18),
> > + EXYNOS9_PIN_BANK_EINTW(1, 0x0E0, "gpm7", 0x1C),
> > +};
> > +
> > +/* pin banks of exynos850 pin-controller 2 (AUD) */
> > +static struct samsung_pin_bank_data exynos850_pin_banks2[] = {
> > + /* Must start with EINTG banks, ordered by EINT group number. */
> > + EXYNOS9_PIN_BANK_EINTG(5, 0x000, "gpb0", 0x00),
> > + EXYNOS9_PIN_BANK_EINTG(5, 0x020, "gpb1", 0x04),
> > +};
> > +
> > +/* pin banks of exynos850 pin-controller 3 (HSI) */
> > +static struct samsung_pin_bank_data exynos850_pin_banks3[] = {
> > + /* Must start with EINTG banks, ordered by EINT group number. */
> > + EXYNOS9_PIN_BANK_EINTG(6, 0x000, "gpf2", 0x00),
> > +};
> > +
> > +/* pin banks of exynos850 pin-controller 4 (CORE) */
> > +static struct samsung_pin_bank_data exynos850_pin_banks4[] = {
> > + /* Must start with EINTG banks, ordered by EINT group number. */
> > + EXYNOS9_PIN_BANK_EINTG(4, 0x000, "gpf0", 0x00),
> > + EXYNOS9_PIN_BANK_EINTG(8, 0x020, "gpf1", 0x04),
> > +};
> > +
> > +/* pin banks of exynos850 pin-controller 5 (PERI) */
> > +static struct samsung_pin_bank_data exynos850_pin_banks5[] = {
> > + /* Must start with EINTG banks, ordered by EINT group number. */
> > + EXYNOS9_PIN_BANK_EINTG(2, 0x000, "gpg0", 0x00),
> > + EXYNOS9_PIN_BANK_EINTG(6, 0x020, "gpp0", 0x04),
> > + EXYNOS9_PIN_BANK_EINTG(4, 0x040, "gpp1", 0x08),
> > + EXYNOS9_PIN_BANK_EINTG(4, 0x060, "gpp2", 0x0C),
> > + EXYNOS9_PIN_BANK_EINTG(8, 0x080, "gpg1", 0x10),
> > + EXYNOS9_PIN_BANK_EINTG(8, 0x0A0, "gpg2", 0x14),
> > + EXYNOS9_PIN_BANK_EINTG(1, 0x0C0, "gpg3", 0x18),
> > + EXYNOS9_PIN_BANK_EINTG(3, 0x0E0, "gpc0", 0x1C),
> > + EXYNOS9_PIN_BANK_EINTG(6, 0x100, "gpc1", 0x20),
> > +};
> > +
> > +static const struct samsung_pin_ctrl exynos850_pin_ctrl[] __initconst = {
> > + {
> > + /* pin-controller instance 0 ALIVE data */
> > + .pin_banks = exynos850_pin_banks0,
> > + .nr_banks = ARRAY_SIZE(exynos850_pin_banks0),
> > + .eint_gpio_init = exynos_eint_gpio_init,
> > + .eint_wkup_init = exynos_eint_wkup_init,
> > + }, {
> > + /* pin-controller instance 1 CMGP data */
> > + .pin_banks = exynos850_pin_banks1,
> > + .nr_banks = ARRAY_SIZE(exynos850_pin_banks1),
> > + .eint_gpio_init = exynos_eint_gpio_init,
> > + .eint_wkup_init = exynos_eint_wkup_init,
> > + }, {
> > + /* pin-controller instance 2 AUD data */
> > + .pin_banks = exynos850_pin_banks2,
> > + .nr_banks = ARRAY_SIZE(exynos850_pin_banks2),
> > + }, {
> > + /* pin-controller instance 3 HSI data */
> > + .pin_banks = exynos850_pin_banks3,
> > + .nr_banks = ARRAY_SIZE(exynos850_pin_banks3),
> > + .eint_gpio_init = exynos_eint_gpio_init,
> > + }, {
> > + /* pin-controller instance 4 CORE data */
> > + .pin_banks = exynos850_pin_banks4,
> > + .nr_banks = ARRAY_SIZE(exynos850_pin_banks4),
> > + .eint_gpio_init = exynos_eint_gpio_init,
> > + }, {
> > + /* pin-controller instance 5 PERI data */
> > + .pin_banks = exynos850_pin_banks5,
> > + .nr_banks = ARRAY_SIZE(exynos850_pin_banks5),
> > + .eint_gpio_init = exynos_eint_gpio_init,
> > + },
> > +};
> > +
> > +const struct samsung_pinctrl_of_match_data exynos850_of_data __initconst = {
> > + .ctrl = exynos850_pin_ctrl,
> > + .num_ctrl = ARRAY_SIZE(exynos850_pin_ctrl),
> > +};
> > diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
> > index da1ec13697e7..595086f2d5dd 100644
> > --- a/drivers/pinctrl/samsung/pinctrl-exynos.h
> > +++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
> > @@ -108,6 +108,35 @@
> > .pctl_res_idx = pctl_idx, \
> > } \
> >
> > +#define EXYNOS9_PIN_BANK_EINTN(pins, reg, id) \
> > + { \
> > + .type = &exynos850_bank_type_alive, \
>
> Having the prefix EXYNOS9 is actually confusing because:
> 1. There is no Exynos9 support,
> 2. The type is exynos850.
>
> Let's keep it consistent, so 850 everywhere,
>
Sure. Will send v3 shortly with fixes for everything you mentioned.
> > + .pctl_offset = reg, \
> > + .nr_pins = pins, \
> > + .eint_type = EINT_TYPE_NONE, \
> > + .name = id \
> > + }
> > +
> > +#define EXYNOS9_PIN_BANK_EINTG(pins, reg, id, offs) \
> > + { \
> > + .type = &exynos850_bank_type_off, \
> > + .pctl_offset = reg, \
> > + .nr_pins = pins, \
> > + .eint_type = EINT_TYPE_GPIO, \
> > + .eint_offset = offs, \
> > + .name = id \
> > + }
> > +
> > +#define EXYNOS9_PIN_BANK_EINTW(pins, reg, id, offs) \
> > + { \
> > + .type = &exynos850_bank_type_alive, \
> > + .pctl_offset = reg, \
> > + .nr_pins = pins, \
> > + .eint_type = EINT_TYPE_WKUP, \
> > + .eint_offset = offs, \
> > + .name = id \
> > + }
> > +
>
> Best regards,
> Krzysztof
Re: [PATCH v2 2/8] pinctrl: samsung: Add Exynos850 SoC specific data
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH v2 2/8] pinctrl: samsung: Add Exynos850 SoC specific data
- From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
- Date: Mon, 9 Aug 2021 21:18:29 +0300
- In-reply-to: <407ee65f-6004-5173-9fcc-99023c85db4e@canonical.com>
- References: <20210806152146.16107-1-semen.protsenko@linaro.org> <20210806152146.16107-3-semen.protsenko@linaro.org> <407ee65f-6004-5173-9fcc-99023c85db4e@canonical.com>
- References:
- [PATCH v2 0/8] Add minimal support for Exynos850 SoC
- From: Sam Protsenko
- [PATCH v2 2/8] pinctrl: samsung: Add Exynos850 SoC specific data
- From: Sam Protsenko
- Re: [PATCH v2 2/8] pinctrl: samsung: Add Exynos850 SoC specific data
- From: Krzysztof Kozlowski
- [PATCH v2 0/8] Add minimal support for Exynos850 SoC
- Prev by Date: Re: [PATCH v3] platform/x86: add meraki-mx100 platform driver
- Next by Date: Re: [PATCH v2 7/8] clk: samsung: Add Exynos850 clock driver stub
- Previous by thread: Re: [PATCH v2 2/8] pinctrl: samsung: Add Exynos850 SoC specific data
- Next by thread: [PATCH v2 4/8] tty: serial: samsung: Init USI to keep clocks running
- Index(es):
 |