Re: [PATCH v3 1/2] dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

On Fri, Jul 16, 2021 at 6:27 PM <lakshmi.sowjanya.d@xxxxxxxxx> wrote:

> From: Lakshmi Sowjanya D <lakshmi.sowjanya.d@xxxxxxxxx>
>
> Add Device Tree bindings documentation for Intel Keem Bay
> SoC's pin controller.
> Add entry for INTEL Keem Bay pinctrl driver in MAINTAINERS file
>
> Acked-by: Mark Gross <mgross@xxxxxxxxxxxxxxx>
> Co-developed-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@xxxxxxxxx>
> Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@xxxxxxxxx>
> Co-developed-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@xxxxxxxxx>
> Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@xxxxxxxxx>
> Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@xxxxxxxxx>
(...)
> +  interrupts:
> +    description:
> +      Specifies the interrupt lines to be used by the controller.
> +    maxItems: 8

Write here that each interrupt is shared by up to 4 GPIO lines.

With that:
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>

Yours,
Linus Walleij