On Mon, Jul 26, 2021 at 4:50 PM Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx> wrote: > > On Mon, Jul 26, 2021 at 4:20 PM Chen-Yu Tsai <wenst@xxxxxxxxxxxx> wrote: > > > > Hi, > > > > I was looking at MTK pinctrl stuff upstream, and it seems there are a few > > `mediatek,pull-*-adv` entries that have invalid values: > > > > arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi: > > mediatek,pull-down-adv = <10>; > > arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi: > > mediatek,pull-down-adv = <10>; > > arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi: > > mediatek,pull-down-adv = <10>; > > arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi: > > mediatek,pull-up-adv = <10>; > > arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi: > > mediatek,pull-down-adv = <10>; > > arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi: > > mediatek,pull-up-adv = <10>; > > arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi: > > mediatek,pull-down-adv = <10>; > > arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts: > > mediatek,pull-down-adv = <10>; > > arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts: > > mediatek,pull-down-adv = <10>; > > arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts: > > mediatek,pull-down-adv = <10>; > > arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts: > > mediatek,pull-up-adv = <10>; > > arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts: > > mediatek,pull-down-adv = <10>; > > arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts: > > mediatek,pull-up-adv = <10>; > > > > According to the bindings, the values should 0~3. <10> is probably a > > incorrect attempt at using binary representation, which is wrong. This > > probably leads to the pull-up/down getting disabled or ignored. > > > > Cound people still working on these two devices take a look? > > > Thanks for pointing this out. It's an incorrect value but 10=0b1010 so > the result is same as 2, since the driver test the value by checking > the last 2 bit. We should still fix this in dts. That probably explains why no one noticed.