Re: [PATCH 5/8] pinctrl: nuvoton: Add driver for WPCM450

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Jun 13, 2021 at 01:06:15PM +0300, Andy Shevchenko wrote:
> On Sun, Jun 13, 2021 at 2:20 AM Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> wrote:
> > On Wed, Jun 02, 2021 at 03:50:39PM +0300, Andy Shevchenko wrote:
> > > On Wed, Jun 2, 2021 at 3:05 PM Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> wrote:
[...]
> > > > +static int wpcm450_gpio_get_direction(struct gpio_chip *chip,
> > > > +                                     unsigned int offset)
> > > > +{
> > > > +       struct wpcm450_pinctrl *pctrl = gpiochip_get_data(chip);
> > > > +       const struct wpcm450_port *port = to_port(offset);
> > > > +       unsigned long flags;
> > > > +       u32 cfg0;
> > > > +       int dir;
> > > > +
> > > > +       spin_lock_irqsave(&pctrl->lock, flags);
> > > > +       if (port->cfg0) {
> > > > +               cfg0 = ioread32(pctrl->gpio_base + port->cfg0);
> > >
> > > > +               dir = !(cfg0 & port_mask(port, offset));
> > > > +       } else {
> > > > +               /* If cfg0 is unavailable, the GPIO is always an input */
> > > > +               dir = 1;
> > > > +       }
> > >
> > > Why above is under spin lock?
> > > Same question for all other similar places in different functions, if any.
> >
> > My intention was to protect the ioread32. But given that it's just a
> > single MMIO read, this might be unnecessary.
> 
> Sometimes it's necessary and I'm not talking about it. (I put blank
> lines around the code I was commenting on)
> 
> So, What I meant above is to get something like this
> 
> if (port->cfg0) {
>   spin lock
>   ...
>   spin unlock
> } else {
>   ...
> }
> 
> or equivalent ideas.

Ah, in other words: Narrowing the scope of the lock as far as possible.
I'll keep it in mind for v2.


> > > What about the GPIO library API that does some additional stuff?
> >
> > I don't know which gpiolib function would be appropriate here, sorry.
> 
> When you leave those request and release callbacks untouched the GPIO
> library will assign default ones. You may see what they do.

Ah, I see. I'll look into it.


> ...
> 
> > > > +       if (!of_find_property(np, "gpio-controller", NULL))
> > > > +               return -ENODEV;
> > >
> > > Dead code?
> >
> > The point here was to check if the node is marked as a GPIO controller,
> > with the boolean property "gpio-controller" (so device_property_read_bool
> > would probably be more appropriate).
> >
> > However, since the gpio-controller property is already defined as
> > required in the DT binding, I'm not sure it's worth checking here.
> 
> Exactly my point.

Alright.


Thanks,
Jonthan Neuschäfer

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux