Add base DTS file for sa8155p-adp and enable boot to console,
tlmm reserved range and also include pmic file(s).
SA8155p-adp board is based on sm8150 Qualcomm Snapdragon SoC.
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: Liam Girdwood <lgirdwood@xxxxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Vinod Koul <vkoul@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Andy Gross <agross@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: linux-gpio@xxxxxxxxxxxxxxx
Cc: bhupesh.linux@xxxxxxxxx
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 363 +++++++++++++++++++++++
2 files changed, 364 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sa8155p-adp.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 456502aeee49..38d3a4728871 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -71,6 +71,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
new file mode 100644
index 000000000000..470d740e060a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "sm8150.dtsi"
+#include "pmm8155au_1.dtsi"
+#include "pmm8155au_2.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SA8155P ADP";
+ compatible = "qcom,sa8155p-adp";
+
+ aliases {
+ serial0 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vreg_3p3: vreg_3p3_regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_3p3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /*
+ * Apparently RPMh does not provide support for PM8150 S4 because it
+ * is always-on; model it as a fixed regulator.
+ */
+ vreg_s4a_1p8: smps4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&vreg_3p3>;
+ };
+};
+
+&apps_rsc {
+ pmm8155au-1-rpmh-regulators {
+ compatible = "qcom,pmm8155au-1-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vreg_3p3>;
+ vdd-s2-supply = <&vreg_3p3>;
+ vdd-s3-supply = <&vreg_3p3>;
+ vdd-s4-supply = <&vreg_3p3>;
+ vdd-s5-supply = <&vreg_3p3>;
+ vdd-s6-supply = <&vreg_3p3>;
+ vdd-s7-supply = <&vreg_3p3>;
+ vdd-s8-supply = <&vreg_3p3>;
+ vdd-s9-supply = <&vreg_3p3>;
+ vdd-s10-supply = <&vreg_3p3>;
+
+ vdd-l1-l8-l11-supply = <&vreg_s6a_0p92>;
+ vdd-l2-l10-supply = <&vreg_3p3>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p92>;
+ vdd-l6-l9-supply = <&vreg_s6a_0p92>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+ vdd-l13-l16-l17-supply = <&vreg_3p3>;
+
+ vreg_s5a_2p04: smps5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_s6a_0p92: smps6 {
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vdda_wcss_pll:
+ vreg_l1a_0p752: ldo1 {
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <752000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_usb_hs_3p1:
+ vreg_l2a_3p072: ldo2 {
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a_0p8: ldo3 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_usb_hs_core:
+ vdda_pll_hv_cc_ebi01:
+ vdda_pll_hv_cc_ebi23:
+ vdda_ufs_2ln_core:
+ vdda_ufs_2ln_core:
+ vdda_usb_ss_core:
+ vdda_usb_ss_dp_core_1:
+ vdda_usb_ss_dp_core_2:
+ vdda_sp_sensor:
+ vdda_qlink_lv:
+ vdda_qlink_lv_ck:
+ vdda_qrefs_0p875_5:
+ vreg_l5a_0p88: ldo5 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_2p96: ldo10 {
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11a_0p8: ldo11 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_qfprom:
+ vdd_qfprom_sp:
+ vdda_usb_hs_1p8:
+ vdda_apc_cs_1p8:
+ vdda_gfx_cs_1p8:
+ vddpx_11:
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13a_2p7: ldo13 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a_1p7: ldo15 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_2p96: ldo17 {
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pmm8155au-2-rpmh-regulators {
+ compatible = "qcom,pmm8155au-2-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vreg_3p3>;
+ vdd-s2-supply = <&vreg_3p3>;
+ vdd-s3-supply = <&vreg_3p3>;
+ vdd-s4-supply = <&vreg_3p3>;
+ vdd-s5-supply = <&vreg_3p3>;
+ vdd-s6-supply = <&vreg_3p3>;
+ vdd-s7-supply = <&vreg_3p3>;
+ vdd-s8-supply = <&vreg_3p3>;
+ vdd-s9-supply = <&vreg_3p3>;
+ vdd-s10-supply = <&vreg_3p3>;
+
+ vdd-l1-l8-l11-supply = <&vreg_s4c_1p352>;
+ vdd-l2-l10-supply = <&vreg_3p3>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s4c_1p352>;
+ vdd-l6-l9-supply = <&vreg_s6c_1p128>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5c_2p04>;
+ vdd-l13-l16-l17-supply = <&vreg_3p3>;
+
+ vreg_s4c_1p352: smps4 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_s5c_2p04: smps5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_s6c_1p128: smps6 {
+ regulator-min-microvolt = <1128000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vdda_wcss_adcdac_1:
+ vdda_wcss_adcdac_2:
+ vreg_l1c_1p304: ldo1 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_5:
+ vreg_l2c_1p808: ldo2 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_10:
+ vreg_l5c_1p2: ldo5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_qlink_hv_ck:
+ vdda_pcie_1ln_pll_1p2:
+ vdda_pcie_2ln_pll_1p2:
+ vdda_hv_refgen0:
+ vdda_ufs_2ln_1p2:
+ vdda_usb_ss_1p2:
+ vdda_usb_ss_dp_1p2:
+ vdda_csi_1p2:
+ vdda_dsi_1p2:
+ vreg_l8c_1p2: ldo8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_3p3: ldo10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_0p8: ldo11 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_6:
+ vreg_l12c_1p808: ldo12 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_2:
+ vreg_l13c_2p96: ldo13 {
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15c_1p9: ldo15 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16c_3p008: ldo16 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_pcie_1ln_core:
+ vdda_pcie_2ln_core:
+ vdda_csi_0_0p9:
+ vdda_csi_1_0p9:
+ vdda_csi_2_0p9:
+ vdda_csi_3_0p9:
+ vreg_l18c_0p88: ldo18 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>;
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ status = "okay";
+
+ reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l10a_2p96>;
+ vcc-max-microamp = <750000>;
+ vccq-supply = <&vreg_l5c_1p2>;
+ vccq-max-microamp = <700000>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vccq2-max-microamp = <750000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l8c_1p2>;
+ vdda-max-microamp = <87100>;
+ vdda-pll-supply = <&vreg_l5a_0p88>;
+ vdda-pll-max-microamp = <18300>;
+};
+
+
+&usb_1_hsphy {
+ status = "okay";
+ vdda-pll-supply = <&vdd_usb_hs_core>;
+ vdda33-supply = <&vdda_usb_hs_3p1>;
+ vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l8c_1p2>;
+ vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
--
2.31.1
[PATCH 8/8] arm64: dts: qcom: sa8155p-adp: Add base dts file
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [PATCH 8/8] arm64: dts: qcom: sa8155p-adp: Add base dts file
- From: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
- Date: Mon, 7 Jun 2021 17:08:40 +0530
- In-reply-to: <20210607113840.15435-1-bhupesh.sharma@linaro.org>
- References: <20210607113840.15435-1-bhupesh.sharma@linaro.org>
- Follow-Ups:
- Re: [PATCH 8/8] arm64: dts: qcom: sa8155p-adp: Add base dts file
- From: Bjorn Andersson
- Re: [PATCH 8/8] arm64: dts: qcom: sa8155p-adp: Add base dts file
- From: Vinod Koul
- Re: [PATCH 8/8] arm64: dts: qcom: sa8155p-adp: Add base dts file
- References:
- [PATCH 0/8] arm64: dts: qcom: Add SA8155p-adp board DTS
- From: Bhupesh Sharma
- [PATCH 0/8] arm64: dts: qcom: Add SA8155p-adp board DTS
- Prev by Date: [PATCH 3/8] dt-bindings: arm: qcom: Add compatible for SA8155p-adp board
- Next by Date: [PATCH 6/8] arm64: dts: qcom: pmm8155au_1: Add base dts file
- Previous by thread: Re: [PATCH 3/8] dt-bindings: arm: qcom: Add compatible for SA8155p-adp board
- Next by thread: Re: [PATCH 8/8] arm64: dts: qcom: sa8155p-adp: Add base dts file
- Index(es):
 |