Re: [PATCH v4 4/6] reset: Add Delta TN48M CPLD reset controller

[Robert Marko <robert.marko@xxxxxxxxxx>]

On Mon, Jun 7, 2021 at 11:23 AM Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> wrote:
>
> Hi Robert,
>
> On Wed, 2021-06-02 at 14:24 +0200, Robert Marko wrote:
> > Delta TN48M CPLD exposes resets for the following:
> > * 88F7040 SoC
> > * 88F6820 SoC
> > * 98DX3265 switch MAC-s
> > * 88E1680 PHY-s
> > * 88E1512 PHY
> > * PoE PSE controller
> >
> > Controller supports only self clearing resets.
> >
> > Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx>
> > ---
> >  drivers/reset/Kconfig       |   9 +++
> >  drivers/reset/Makefile      |   1 +
> >  drivers/reset/reset-tn48m.c | 128 ++++++++++++++++++++++++++++++++++++
> >  3 files changed, 138 insertions(+)
> >  create mode 100644 drivers/reset/reset-tn48m.c
> >
> > diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> > index 4171c6f76385..14e179cda58c 100644
> > --- a/drivers/reset/Kconfig
> > +++ b/drivers/reset/Kconfig
> > @@ -237,6 +237,15 @@ config RESET_TI_SYSCON
> >         you wish to use the reset framework for such memory-mapped devices,
> >         say Y here. Otherwise, say N.
> >
> > +config RESET_TN48M_CPLD
> > +     tristate "Delta Networks TN48M switch CPLD reset controller"
> > +     depends on MFD_TN48M_CPLD
>
> Let's make this
>
>         depends on MFD_TN48M_CPLD || COMPILE_TEST
>         default MFD_TN48M_CPLD

Sure, I will change that and send a v5.
>
> unless there is a reason not to enable the reset driver by default when
> the MFD driver is activated.

No, it's just a habit of making everything optional.

Regards,
Robert
>
> Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
>
> regards
> Philipp



-- 
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@xxxxxxxxxx
Web: www.sartura.hr