Re: [PATCH v2 1/4] dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 27, 2021 at 08:54:50AM +0800, Steven Lee wrote:
> SGPIO bindings should be converted as yaml format.
> In addition to the file conversion, a new property max-ngpios is
> added in the yaml file as well.
> The new property is required by the enhanced sgpio driver for
> making the configuration of the max number of gpio pins more flexible.

The rest of the binding looks fine. Make this property a separate patch 
if you don't end up dropping it.

> 
> Signed-off-by: Steven Lee <steven_lee@xxxxxxxxxxxxxx>
> ---
>  .../bindings/gpio/aspeed,sgpio.yaml           | 91 +++++++++++++++++++
>  .../devicetree/bindings/gpio/sgpio-aspeed.txt | 46 ----------
>  2 files changed, 91 insertions(+), 46 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
>  delete mode 100644 Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
> 
> diff --git a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
> new file mode 100644
> index 000000000000..02eb0c5023e9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
> @@ -0,0 +1,91 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/aspeed,sgpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Aspeed SGPIO controller
> +
> +maintainers:
> +  - Andrew Jeffery <andrew@xxxxxxxx>
> +
> +description:
> +  This SGPIO controller is for ASPEED AST2400, AST2500 and AST2600 SoC,
> +  AST2600 have two sgpio master one with 128 pins another one with 80 pins,
> +  AST2500/AST2400 have one sgpio master with 80 pins. Each of the Serial
> +  GPIO pins can be programmed to support the following options
> +  - Support interrupt option for each input port and various interrupt
> +    sensitivity option (level-high, level-low, edge-high, edge-low)
> +  - Support reset tolerance option for each output port
> +  - Directly connected to APB bus and its shift clock is from APB bus clock
> +    divided by a programmable value.
> +  - Co-work with external signal-chained TTL components (74LV165/74LV595)
> +
> +properties:
> +  compatible:
> +    enum:
> +      - aspeed,ast2400-sgpiom
> +      - aspeed,ast2500-sgpiom
> +      - aspeed,ast2600-sgpiom
> +
> +  reg:
> +    maxItems: 1
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    const: 2
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  clocks:
> +    maxItems: 1
> +
> +  ngpios:
> +    minimum: 0
> +    maximum: 128
> +
> +  max-ngpios:
> +    description:
> +      represents the number of actual hardware-supported GPIOs (ie,
> +      slots within the clocked serial GPIO data). Since each HW GPIO is both an
> +      input and an output, we provide max_ngpios * 2 lines on our gpiochip
> +      device. We also use it to define the split between the inputs and
> +      outputs; the inputs start at line 0, the outputs start at max_ngpios.
> +    minimum: 0
> +    maximum: 128
> +
> +  bus-frequency: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - gpio-controller
> +  - '#gpio-cells'
> +  - interrupts
> +  - interrupt-controller
> +  - ngpios
> +  - max-ngpios
> +  - clocks
> +  - bus-frequency
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/aspeed-clock.h>
> +    sgpio: sgpio@1e780200 {
> +        #gpio-cells = <2>;
> +        compatible = "aspeed,ast2500-sgpiom";
> +        gpio-controller;
> +        interrupts = <40>;
> +        reg = <0x1e780200 0x0100>;
> +        clocks = <&syscon ASPEED_CLK_APB>;
> +        interrupt-controller;
> +        ngpios = <8>;
> +        max-ngpios = <80>;
> +        bus-frequency = <12000000>;
> +    };
> diff --git a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
> deleted file mode 100644
> index be329ea4794f..000000000000
> --- a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
> +++ /dev/null
> @@ -1,46 +0,0 @@
> -Aspeed SGPIO controller Device Tree Bindings
> ---------------------------------------------
> -
> -This SGPIO controller is for ASPEED AST2500 SoC, it supports up to 80 full
> -featured Serial GPIOs. Each of the Serial GPIO pins can be programmed to
> -support the following options:
> -- Support interrupt option for each input port and various interrupt
> -  sensitivity option (level-high, level-low, edge-high, edge-low)
> -- Support reset tolerance option for each output port
> -- Directly connected to APB bus and its shift clock is from APB bus clock
> -  divided by a programmable value.
> -- Co-work with external signal-chained TTL components (74LV165/74LV595)
> -
> -Required properties:
> -
> -- compatible : Should be one of
> -  "aspeed,ast2400-sgpio", "aspeed,ast2500-sgpio"
> -- #gpio-cells : Should be 2, see gpio.txt
> -- reg : Address and length of the register set for the device
> -- gpio-controller : Marks the device node as a GPIO controller
> -- interrupts : Interrupt specifier, see interrupt-controller/interrupts.txt
> -- interrupt-controller : Mark the GPIO controller as an interrupt-controller
> -- ngpios : number of *hardware* GPIO lines, see gpio.txt. This will expose
> -  2 software GPIOs per hardware GPIO: one for hardware input, one for hardware
> -  output. Up to 80 pins, must be a multiple of 8.
> -- clocks : A phandle to the APB clock for SGPM clock division
> -- bus-frequency : SGPM CLK frequency
> -
> -The sgpio and interrupt properties are further described in their respective
> -bindings documentation:
> -
> -- Documentation/devicetree/bindings/gpio/gpio.txt
> -- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> -
> -  Example:
> -	sgpio: sgpio@1e780200 {
> -		#gpio-cells = <2>;
> -		compatible = "aspeed,ast2500-sgpio";
> -		gpio-controller;
> -		interrupts = <40>;
> -		reg = <0x1e780200 0x0100>;
> -		clocks = <&syscon ASPEED_CLK_APB>;
> -		interrupt-controller;
> -		ngpios = <8>;
> -		bus-frequency = <12000000>;
> -	};
> -- 
> 2.17.1



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux