Re: [PATCH v3 3/6] dt-bindings: mfd: Binding for RTL8231

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 24 May 2021 00:34:01 +0200, Sander Vanheule wrote:
> Add a binding description for the Realtek RTL8231, a GPIO and LED
> expander chip commonly used in ethernet switches based on a Realtek
> switch SoC. These chips can be addressed via an MDIO or SMI bus, or used
> as a plain 36-bit shift register.
> 
> This binding only describes the feature set provided by the MDIO/SMI
> configuration, and covers the GPIO, PWM, and pin control properties. The
> LED properties are defined in a separate binding.
> 
> Signed-off-by: Sander Vanheule <sander@xxxxxxxxxxxxx>
> ---
>  .../bindings/mfd/realtek,rtl8231.yaml         | 190 ++++++++++++++++++
>  1 file changed, 190 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/realtek,rtl8231.yaml
> 

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux