Re: [PATCH v3 5/6] dt-bindings: mfd: Add Delta TN48M CPLD drivers bindings

[Robert Marko <robert.marko@xxxxxxxxxx>]

On Wed, Jun 2, 2021 at 12:47 PM Lee Jones <lee.jones@xxxxxxxxxx> wrote:
>
> On Mon, 31 May 2021, Robert Marko wrote:
>
> > Add binding documents for the Delta TN48M CPLD drivers.
> >
> > Signed-off-by: Robert Marko <robert.marko@xxxxxxxxxx>
> > ---
> > Changes in v3:
> > * Include bindings for reset driver
> >
> > Changes in v2:
> > * Implement MFD as a simple I2C MFD
> > * Add GPIO bindings as separate
> >
> >  .../bindings/gpio/delta,tn48m-gpio.yaml       | 42 +++++++++
> >  .../bindings/mfd/delta,tn48m-cpld.yaml        | 90 +++++++++++++++++++
> >  .../bindings/reset/delta,tn48m-reset.yaml     | 35 ++++++++
> >  3 files changed, 167 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml
> >  create mode 100644 Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
> >  create mode 100644 Documentation/devicetree/bindings/reset/delta,tn48m-reset.yaml
>
> > +++ b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
> > @@ -0,0 +1,90 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mfd/delta,tn48m-cpld.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Delta Networks TN48M CPLD controller
> > +
> > +maintainers:
> > +  - Robert Marko <robert.marko@xxxxxxxxxx>
> > +
> > +description: |
> > +  Lattice CPLD onboard the TN48M switches is used for system
> > +  management.
> > +
> > +  It provides information about the hardware model, revision,
> > +  PSU status etc.
> > +
> > +  It is also being used as a GPIO expander for the SFP slots and
> > +  reset controller for the switch MAC-s and other peripherals.
> > +
> > +properties:
> > +  compatible:
> > +    const: delta,tn48m-cpld
> > +
> > +  reg:
> > +    description:
> > +      I2C device address.
> > +    maxItems: 1
> > +
> > +  "#address-cells":
> > +    const: 1
> > +
> > +  "#size-cells":
> > +    const: 0
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - "#address-cells"
> > +  - "#size-cells"
> > +
> > +patternProperties:
> > +  "^gpio(@[0-9a-f]+)?$":
> > +    $ref: ../gpio/delta,tn48m-gpio.yaml
> > +
> > +  "^reset-controller?$":
> > +    $ref: ../reset/delta,tn48m-reset.yaml
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    i2c {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        cpld@41 {
> > +            compatible = "delta,tn48m-cpld";
> > +            reg = <0x41>;
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            gpio@31 {
> > +                compatible = "delta,tn48m-gpio-sfp-tx-disable";
> > +                reg = <0x31>;
> > +                gpio-controller;
> > +                #gpio-cells = <2>;
> > +            };
> > +
> > +            gpio@3a {
> > +                compatible = "delta,tn48m-gpio-sfp-present";
> > +                reg = <0x3a>;
> > +                gpio-controller;
> > +                #gpio-cells = <2>;
> > +            };
> > +
> > +            gpio@40 {
> > +                compatible = "delta,tn48m-gpio-sfp-los";
> > +                reg = <0x40>;
> > +                gpio-controller;
> > +                #gpio-cells = <2>;
> > +            };
> > +
> > +            reset-controller {
> > +              compatible = "delta,tn48m-reset";
> > +              #reset-cells = <1>;
> > +            };
>
> How is the Reset component addressed?
It has a defined register in the driver.
Now that I think of it, it would make sense to use reg for it like for the GPIO
and not hardcode it.

Regards,
Robert
>
> > +        };
> > +    };
>
> --
> Lee Jones [李琼斯]
> Senior Technical Lead - Developer Services
> Linaro.org │ Open source software for Arm SoCs
> Follow Linaro: Facebook | Twitter | Blog



-- 
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@xxxxxxxxxx
Web: www.sartura.hr