Re: [PATCH v3 5/6] pinctrl: Add RTL8231 pin control and GPIO support

[Michael Walle <michael@xxxxxxxx>]

> +	gpio_cfg.reg_dat_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DATA0);
> +	gpio_cfg.reg_set_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DATA0);
> +	gpio_cfg.reg_dir_in_base = GPIO_REGMAP_ADDR(RTL8231_REG_GPIO_DIR0);

Btw. you'd only need GPIO_REGMAP_ADDR(x) if x might be 0. Because you 
have
a constant != 0 there, you could save the GPIO_REGMAP_ADDR() call. You
could drop this if you like, but no need to respin the series for this.

-michael