[PATCH v3 0/2] Apple M1 pinctrl DT bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Mark Kettenis <kettenis@xxxxxxxxxxx>

This small series adds bindings for the pin and GPIO controller found
on the Apple M1 SoC.

At this point, the primary consumer for these bindings is U-Boot.
With the help of these bindings U-Boot can bring up the PCIe root
complex into a state where the OS use it without having to deal with
the GPIO pins.  A Linux driver may be implemented later to support
power management and/or other devices that need GPIO control.  Since
the binding is based on standard pinmux node bindings this should be
relatively easy.

Changelog:

v2: - Fix typo in DT schema

v3: - Add description for interrupts property


Mark Kettenis (2):
  dt-bindings: pinctrl: Add DT bindings for apple,pinctrl
  arm64: apple: Add pinctrl nodes

 .../bindings/pinctrl/apple,pinctrl.yaml       | 106 ++++++++++++++++++
 MAINTAINERS                                   |   2 +
 arch/arm64/boot/dts/apple/t8103.dtsi          |  83 ++++++++++++++
 include/dt-bindings/pinctrl/apple.h           |  13 +++
 4 files changed, 204 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
 create mode 100644 include/dt-bindings/pinctrl/apple.h

-- 
2.31.1




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux