Re: [PATCH] pinctrl: single: config: enable the pin's input

[Tony Lindgren <tony@xxxxxxxxxxx>]

* Dario Binacchi <dariobin@xxxxxxxxx> [210514 16:38]:
> It enables / disables the input buffer. As explained in the description
> of 'enum pin_config_param' this does not affect the pin's ability to
> drive output.
> 
> Signed-off-by: Dario Binacchi <dariobin@xxxxxxxxx>
> ---
> 
>  drivers/pinctrl/pinctrl-single.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
> index 2c9c9835f375..4e7cdb9ee855 100644
> --- a/drivers/pinctrl/pinctrl-single.c
> +++ b/drivers/pinctrl/pinctrl-single.c
> @@ -534,6 +534,7 @@ static int pcs_pinconf_get(struct pinctrl_dev *pctldev,
>  		case PIN_CONFIG_DRIVE_STRENGTH:
>  		case PIN_CONFIG_SLEW_RATE:
>  		case PIN_CONFIG_MODE_LOW_POWER:
> +		case PIN_CONFIG_INPUT_ENABLE:
>  		default:
>  			*config = data;
>  			break;
> @@ -572,6 +573,7 @@ static int pcs_pinconf_set(struct pinctrl_dev *pctldev,
>  			case PIN_CONFIG_DRIVE_STRENGTH:
>  			case PIN_CONFIG_SLEW_RATE:
>  			case PIN_CONFIG_MODE_LOW_POWER:
> +			case PIN_CONFIG_INPUT_ENABLE:
>  				shift = ffs(func->conf[i].mask) - 1;
>  				data &= ~func->conf[i].mask;
>  				data |= (arg << shift) & func->conf[i].mask;
> @@ -918,6 +920,7 @@ static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np,
>  	static const struct pcs_conf_type prop2[] = {
>  		{ "pinctrl-single,drive-strength", PIN_CONFIG_DRIVE_STRENGTH, },
>  		{ "pinctrl-single,slew-rate", PIN_CONFIG_SLEW_RATE, },
> +		{ "pinctrl-single,input-enable", PIN_CONFIG_INPUT_ENABLE, },
>  		{ "pinctrl-single,input-schmitt", PIN_CONFIG_INPUT_SCHMITT, },
>  		{ "pinctrl-single,low-power-mode", PIN_CONFIG_MODE_LOW_POWER, },
>  	};

Looks OK to me if this works for Linus W. You need another patch to
update the binding though:

Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml

Or if there is such a patch floating around, I was not in Cc :)

Regards,

Tony