[PATCH v2 1/3] dt-bindings: gpio: add YAML description for rockchip,gpio-bank

[Johan Jonker <jbx6244@xxxxxxxxx>]

Current dts files with "rockchip,gpio-bank" subnodes
are manually verified. In order to automate this process
the text that describes the compatible in rockchip,pinctrl.txt
is removed and converted to YAML in rockchip,gpio-bank.yaml.

Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
---
Changed V2:
  changed example gpio nodename
---
 .../bindings/gpio/rockchip,gpio-bank.yaml          | 82 ++++++++++++++++++++++
 .../bindings/pinctrl/rockchip,pinctrl.txt          | 58 +--------------
 2 files changed, 83 insertions(+), 57 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml

diff --git a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
new file mode 100644
index 000000000..d993e002c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/rockchip,gpio-bank.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip GPIO bank
+
+maintainers:
+  - Heiko Stuebner <heiko@xxxxxxxxx>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,gpio-bank
+      - rockchip,rk3188-gpio-bank0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl: pinctrl {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      gpio0: gpio@2000a000 {
+        compatible = "rockchip,rk3188-gpio-bank0";
+        reg = <0x2000a000 0x100>;
+        interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_gates8 9>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+      };
+
+      gpio1: gpio@2003c000 {
+        compatible = "rockchip,gpio-bank";
+        reg = <0x2003c000 0x100>;
+        interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_gates8 10>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
index d3eae61a3..4719a6a07 100644
--- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
@@ -50,23 +50,7 @@ Deprecated properties for iomux controller:
 	 Use rockchip,grf and rockchip,pmu described above instead.
 
 Required properties for gpio sub nodes:
-  - compatible: "rockchip,gpio-bank"
-  - reg: register of the gpio bank (different than the iomux registerset)
-  - interrupts: base interrupt of the gpio bank in the interrupt controller
-  - clocks: clock that drives this bank
-  - gpio-controller: identifies the node as a gpio controller and pin bank.
-  - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
-    binding is used, the amount of cells must be specified as 2. See generic
-    GPIO binding documentation for description of particular cells.
-  - interrupt-controller: identifies the controller node as interrupt-parent.
-  - #interrupt-cells: the value of this property should be 2 and the interrupt
-    cells should use the standard two-cell scheme described in
-    bindings/interrupt-controller/interrupts.txt
-
-Deprecated properties for gpio sub nodes:
-  - compatible: "rockchip,rk3188-gpio-bank0"
-  - reg: second element: separate pull register for rk3188 bank0, use
-	 rockchip,pmu described above instead
+See rockchip,gpio-bank.yaml
 
 Required properties for pin configuration node:
   - rockchip,pins: 3 integers array, represents a group of pins mux and config
@@ -127,43 +111,3 @@ uart2: serial@20064000 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_xfer>;
 };
-
-Example for rk3188:
-
-	pinctrl@20008000 {
-		compatible = "rockchip,rk3188-pinctrl";
-		rockchip,grf = <&grf>;
-		rockchip,pmu = <&pmu>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		gpio0: gpio0@2000a000 {
-			compatible = "rockchip,rk3188-gpio-bank0";
-			reg = <0x2000a000 0x100>;
-			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_gates8 9>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio1: gpio1@2003c000 {
-			compatible = "rockchip,gpio-bank";
-			reg = <0x2003c000 0x100>;
-			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_gates8 10>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		...
-
-	};
-- 
2.11.0