[RFC v2 1/2] dt-bindings: gpio-mux-input: add documentation

[Mauri Sandberg <sandberg@xxxxxxxxxxxxx>]

Add documentation for a general GPIO multiplexer.

Signed-off-by: Mauri Sandberg <sandberg@xxxxxxxxxxxxx>
---
 .../bindings/gpio/gpio-mux-input.yaml         | 56 +++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-mux-input.yaml

diff --git a/Documentation/devicetree/bindings/gpio/gpio-mux-input.yaml b/Documentation/devicetree/bindings/gpio/gpio-mux-input.yaml
new file mode 100644
index 000000000000..5cb5d6f9e30a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mux-input.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-mux-input.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic GPIO input multiplexer
+
+maintainers:
+  - Mauri Sandberg <sandberg@xxxxxxxxxxxxx>
+
+description: |
+  A generic GPIO based input multiplexer
+
+  This driver uses a mux-controller to drive the multiplexer and has a single
+  output pin for reading the inputs to the mux.
+
+  For GPIO consumer documentation see gpio.txt.
+
+properties:
+  compatible:
+    enum:
+      - gpio-mux-input
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  pin-gpios:
+    description: |
+      The GPIO pin used as the output from the multiplexer
+
+required:
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+  - pin-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    gpio2: key-mux1 {
+        compatible = "gpio-mux-input";
+        mux-controls = <&mux>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        // GPIOs used by this node, mux output pin
+        pin-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+    };
+
+...
-- 
2.25.1