[PATCH] gpio: pl061: Support implementations without GPIOINTR line

[Alexander A Sverdlin <alexander.sverdlin@xxxxxxxxx>]

From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>

There are several implementations of PL061 which lack GPIOINTR signal in
hardware and only have individual GPIOMIS[7:0] interrupts. Use the
hierarchical interrupt support of the gpiolib in these cases (if at least 8
IRQs are configured for the PL061).

One in-tree example is arch/arm/boot/dts/axm55xx.dtsi, PL061 instances have
8 IRQs defined, but current driver supports only the first one, so only one
pin would work as IRQ trigger.

Link: https://lore.kernel.org/linux-gpio/CACRpkdZpYzpMDWqJobSYH=JHgB74HbCQihOtexs+sVyo6SRJdA@xxxxxxxxxxxxxx/
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
---
 drivers/gpio/Kconfig      |  1 +
 drivers/gpio/gpio-pl061.c | 46 +++++++++++++++++++++++++++++++++++++++-------
 2 files changed, 40 insertions(+), 7 deletions(-)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b8013cf..6601758 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -426,6 +426,7 @@ config GPIO_PL061
 	depends on ARM_AMBA
 	select IRQ_DOMAIN
 	select GPIOLIB_IRQCHIP
+	select IRQ_DOMAIN_HIERARCHY
 	help
 	  Say yes here to support the PrimeCell PL061 GPIO device
 
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index 3439120..3c70386 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -282,6 +282,23 @@ static int pl061_irq_set_wake(struct irq_data *d, unsigned int state)
 	return irq_set_irq_wake(pl061->parent_irq, state);
 }
 
+static int pl061_child_to_parent_hwirq(struct gpio_chip *gc, unsigned int child,
+				       unsigned int child_type,
+				       unsigned int *parent,
+				       unsigned int *parent_type)
+{
+	struct amba_device *adev = to_amba_device(gc->parent);
+	unsigned int irq = adev->irq[child];
+	struct irq_data *d = irq_get_irq_data(irq);
+
+	if (!d)
+		return -EINVAL;
+
+	*parent_type = irqd_get_trigger_type(d);
+	*parent = irqd_to_hwirq(d);
+	return 0;
+}
+
 static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
 {
 	struct device *dev = &adev->dev;
@@ -332,16 +349,31 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
 
 	girq = &pl061->gc.irq;
 	girq->chip = &pl061->irq_chip;
-	girq->parent_handler = pl061_irq_handler;
-	girq->num_parents = 1;
-	girq->parents = devm_kcalloc(dev, 1, sizeof(*girq->parents),
-				     GFP_KERNEL);
-	if (!girq->parents)
-		return -ENOMEM;
-	girq->parents[0] = irq;
 	girq->default_type = IRQ_TYPE_NONE;
 	girq->handler = handle_bad_irq;
 
+	/*
+	 * There are some PL061 implementations which lack GPIOINTR in hardware
+	 * and only have individual GPIOMIS[7:0] signals. We distinguish them by
+	 * the number of IRQs assigned to the AMBA device.
+	 */
+	if (!adev->irq[PL061_GPIO_NR - 1]) {
+		WARN_ON(adev->irq[1]);
+
+		girq->parent_handler = pl061_irq_handler;
+		girq->num_parents = 1;
+		girq->parents = devm_kcalloc(dev, 1, sizeof(*girq->parents),
+					     GFP_KERNEL);
+		if (!girq->parents)
+			return -ENOMEM;
+		girq->parents[0] = irq;
+	} else {
+		girq->fwnode = dev->fwnode;
+		girq->parent_domain =
+			irq_get_irq_data(adev->irq[PL061_GPIO_NR - 1])->domain;
+		girq->child_to_parent_hwirq = pl061_child_to_parent_hwirq;
+	}
+
 	ret = devm_gpiochip_add_data(dev, &pl061->gc, pl061);
 	if (ret)
 		return ret;
-- 
2.4.6