Re: [PATCH v5 04/15] dt-bindings: add BCM6328 pincontroller binding documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Mar 06, 2021 at 04:57:01PM +0100, Álvaro Fernández Rojas wrote:
> Add binding documentation for the pincontrol core found in BCM6328 SoCs.
> 
> Signed-off-by: Jonas Gorski <jonas.gorski@xxxxxxxxx>
> Co-developed-by: Jonas Gorski <jonas.gorski@xxxxxxxxx>
> Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
> ---
>  v5: change Documentation to dt-bindings in commit title
>  v4: no changes
>  v3: add new gpio node
>  v2: remove interrupts
> 
>  .../pinctrl/brcm,bcm6328-pinctrl.yaml         | 171 ++++++++++++++++++
>  1 file changed, 171 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
> new file mode 100644
> index 000000000000..d4e3c7897f19
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
> @@ -0,0 +1,171 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom BCM6328 pin controller
> +
> +maintainers:
> +  - Álvaro Fernández Rojas <noltari@xxxxxxxxx>
> +  - Jonas Gorski <jonas.gorski@xxxxxxxxx>
> +
> +description: |+
> +  The pin controller node should be the child of a syscon node.
> +
> +  Refer to the the bindings described in
> +  Documentation/devicetree/bindings/mfd/syscon.yaml
> +
> +properties:
> +  compatible:
> +    const: brcm,bcm6328-pinctrl
> +
> +patternProperties:
> +  '^gpio$':

Not a pattern, move to 'properties'

> +    type: object
> +    properties:
> +      compatible:
> +        const: brcm,bcm6328-gpio
> +
> +      data:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: |
> +          Offset in the register map for the data register (in bytes).
> +
> +      dirout:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: |
> +          Offset in the register map for the dirout register (in bytes).
> +
> +      gpio-controller: true
> +
> +      "#gpio-cells":
> +        const: 2
> +
> +      gpio-ranges:
> +        maxItems: 1
> +
> +    required:
> +      - gpio-controller
> +      - gpio-ranges
> +      - '#gpio-cells'
> +
> +  '^.*$':
> +    if:
> +      type: object
> +    then:

Instead of this hack (which shouldn't work because 'gpio' is also a 
node), use some defined node name pattern (e.g. '-pins$')

You need an 'additionalProperties: false' at this level.

> +      properties:
> +        function:
> +          $ref: "/schemas/types.yaml#/definitions/string"

Reference the pinctrl schemas which define these properties.

> +          enum: [ serial_led_data, serial_led_clk, inet_act_led, pcie_clkreq,
> +                  led, ephy0_act_led, ephy1_act_led, ephy2_act_led,
> +                  ephy3_act_led, hsspi_cs1, usb_device_port, usb_host_port ]
> +
> +        pins:
> +          $ref: "/schemas/types.yaml#/definitions/string"
> +          enum: [ gpio6, gpio7, gpio11, gpio16, gpio17, gpio18, gpio19,
> +                  gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1,
> +                  usb_port1 ]
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    gpio_cntl@10000080 {
> +      compatible = "syscon", "simple-mfd";

syscon needs a specific compatible for the SoC block.

What else is in this block besides pinctrl?

> +      reg = <0x10000080 0x80>;
> +
> +      pinctrl: pinctrl {
> +        compatible = "brcm,bcm6328-pinctrl";

Is there a register range of just pinctrl registers? If so, add 'reg' 
and define the sub-range.


> +
> +        gpio {
> +          compatible = "brcm,bcm6328-gpio";
> +          data = <0xc>;
> +          dirout = <0x4>;
> +
> +          gpio-controller;
> +          gpio-ranges = <&pinctrl 0 0 32>;
> +          #gpio-cells = <2>;
> +        };
> +
> +        pinctrl_serial_led: serial_led {
> +          pinctrl_serial_led_data: serial_led_data {
> +            function = "serial_led_data";
> +            pins = "gpio6";
> +          };
> +
> +          pinctrl_serial_led_clk: serial_led_clk {
> +            function = "serial_led_clk";
> +            pins = "gpio7";
> +          };
> +        };
> +
> +        pinctrl_inet_act_led: inet_act_led {
> +          function = "inet_act_led";
> +          pins = "gpio11";
> +        };
> +
> +        pinctrl_pcie_clkreq: pcie_clkreq {
> +          function = "pcie_clkreq";
> +          pins = "gpio16";
> +        };
> +
> +        pinctrl_ephy0_spd_led: ephy0_spd_led {
> +          function = "led";
> +          pins = "gpio17";
> +        };
> +
> +        pinctrl_ephy1_spd_led: ephy1_spd_led {
> +          function = "led";
> +          pins = "gpio18";
> +        };
> +
> +        pinctrl_ephy2_spd_led: ephy2_spd_led {
> +          function = "led";
> +          pins = "gpio19";
> +        };
> +
> +        pinctrl_ephy3_spd_led: ephy3_spd_led {
> +          function = "led";
> +          pins = "gpio20";
> +        };
> +
> +        pinctrl_ephy0_act_led: ephy0_act_led {
> +          function = "ephy0_act_led";
> +          pins = "gpio25";
> +        };
> +
> +        pinctrl_ephy1_act_led: ephy1_act_led {
> +          function = "ephy1_act_led";
> +          pins = "gpio26";
> +        };
> +
> +        pinctrl_ephy2_act_led: ephy2_act_led {
> +          function = "ephy2_act_led";
> +          pins = "gpio27";
> +        };
> +
> +        pinctrl_ephy3_act_led: ephy3_act_led {
> +          function = "ephy3_act_led";
> +          pins = "gpio28";
> +        };
> +
> +        pinctrl_hsspi_cs1: hsspi_cs1 {
> +          function = "hsspi_cs1";
> +          pins = "hsspi_cs1";
> +        };
> +
> +        pinctrl_usb_port1_device: usb_port1_device {
> +          function = "usb_device_port";
> +          pins = "usb_port1";
> +        };
> +
> +        pinctrl_usb_port1_host: usb_port1_host {
> +          function = "usb_host_port";
> +          pins = "usb_port1";
> +        };
> +      };
> +    };
> -- 
> 2.20.1
> 



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux