Re: [PATCH 1/4] arm64: dts: qcom: sdm845: fix number of pins in 'gpio-ranges'

[Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>]

On Fri 05 Mar 19:28 CST 2021, Shawn Guo wrote:

> On Fri, Mar 05, 2021 at 03:43:08PM -0600, Bjorn Andersson wrote:
> > On Tue 02 Mar 21:31 CST 2021, Shawn Guo wrote:
> > 
> > > The last cell of 'gpio-ranges' should be number of GPIO pins, and in
> > > case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
> > > than msm_pinctrl_soc_data.ngpio - 1.
> > > 
> > 
> > This is a historical artifact, SDM845 has 150 GPIO pins. In addition to
> > this there's an output-only pin for UFS, which I exposed as an GPIO as
> > well - but it's only supposed to be used as a reset-gpio for the UFS
> > device.
> > 
> > Perhaps that still mandates that gpio-ranges should cover it?
> 
> I think the number in DT gpio-ranges should match msm_pinctrl_soc_data.ngpio.
> Otherwise, kernel will be confused and be running into the issue like
> below in some case.
> 
> > 
> > > This fixes the problem that when the last GPIO pin in the range is
> > > configured with the following call sequence, it always fails with
> > > -EPROBE_DEFER.
> > > 
> > >     pinctrl_gpio_set_config()
> > >         pinctrl_get_device_gpio_range()
> > >             pinctrl_match_gpio_range()
> > 
> > When do we hit this sequence? I didn't think operations on the UFS
> > GP(I)O would ever take this code path?
> 
> It will, if we have UFS driver booting from ACPI and requesting reset
> GPIO.

But does the UFS driver somehow request GPIO 190 on SC8180x?

I made up the idea that this is a GPIO, there really only is 190 (0-189)
GPIOs on thie SoC.

Downstream they use a pinconf node with "output-high"/"output-low" to
toggle the reset pin and I don't find any references in the Flex 5G
DSDT.

> And we are hit this sequence with my patch that adds .set_config
> for gpio_chip [1].
> 

What's calling pinctrl_gpio_set_config() in this case?

Regards,
Bjorn

> Shawn
> 
> [1] https://lore.kernel.org/linux-gpio/YEDVMpHyCGbZOrmF@xxxxxxxxxxxxxxxxxx/