Re: [PATCH] gpiolib: acpi: support override broken GPIO number in ACPI table

[Shawn Guo <shawn.guo@xxxxxxxxxx>]

On Tue, Mar 02, 2021 at 10:02:49PM -0700, Jeffrey Hugo wrote:
> Sorry, just joining the thread now.  Hopefully I'm addressing everything
> targeted at me.
> 
> I used to do kernel work on MSMs, then kernel work on server CPUs, but now I
> do kernel work on AI accelerators.  Never was on the firmware team, but I
> have a lot of contacts in those areas.  On my own time, I support Linux on
> the Qualcomm laptops.
> 
> Its not MS that needs to fix things (although there is plenty of things I
> could point to that MS could fix), its the Qualcomm Windows FW folks.  They
> have told me a while ago they were planning on fixing this issue on some
> future chipset, but apparently that hasn't happened yet.  Sadly, once these
> laptops ship, they are in a frozen maintenance mode.
> 
> In my opinion, MS has allowed Qualcomm to get away with doing bad things in
> ACPI on the Qualcomm laptops.  The ACPI is not a true hardware description
> that is OS agnostic as it should be, and probably violates the spec in many
> ways.  Instead, the ACPI is written against the Windows drivers, and has a
> lot of OS driver crap pushed into it.
> 
> The GPIO description is one such thing.
> 
> As I understand it, any particular SoC will have a number of GPIOs supported
> by the TLMM.  0 - N.  Linux understands this.  However, in the ACPI of the
> Qualcomm Windows laptops, you will likely find atleast one GPIO number which
> exceeds this N.  These are "virtual" GPIOs, and are a construct of the
> Windows Qualcomm TLMM driver and how it interfaces with the frameworks
> within Windows.
> 
> Some GPIO lines can be configured as wakeup sources by routing them to a
> specific hardware block in the SoC (which block it is varies from SoC to
> SoC).  Windows has a specific weird way of handling this which requires a
> unique "GPIO chip" to handle.  GPIO chips in Windows contain 32 GPIOs, so
> for each wakeup GPIO, the TLMM driver creates a GPIO chip (essentially
> creating 32 GPIOs), and assigns the added GPIOs numbers which exceed N.  The
> TLMM driver has an internal mapping of which virtual GPIO number corresponds
> to which real GPIO.
> 
> So, ACPI says that some peripheral has GPIO N+X, which is not a real GPIO.
> That peripheral goes and requests that GPIO, which gets routed to the TLMM
> driver, and the TLMM driver translates that number to the real GPIO, and
> provides the reference back to the peripheral, while also setting up the
> special wakeup hardware.
> 
> So, N+1 is the first supported wakup GPIO, N+1+32 is the next one, then
> N+1+32+32, and so on.

Jeffrey,

Thanks so much for these great information!

May I ask a bit more about how the virtual number N+1+32*n maps back to
the real number (R)?  For example of touchpad GPIO on Flex 5G, I think
we have:

  N+1+32*n = 0x0280
  N = 191
  R = 24

If my math not bad, n = 14.  How does 14 map to 24?

Shawn