[PATCH] gpio: regmap: move struct gpio_regmap definition

[Álvaro Fernández Rojas <noltari@xxxxxxxxx>]

struct gpio_regmap should be declared in gpio/regmap.h.
This way other drivers can access the structure data when registering a gpio
regmap controller.

Fixes: ebe363197e52 ("gpio: add a reusable generic gpio_chip using regmap")
Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
---
 drivers/gpio/gpio-regmap.c  | 20 ------------------
 include/linux/gpio/regmap.h | 41 ++++++++++++++++++++++++++++++++++++-
 2 files changed, 40 insertions(+), 21 deletions(-)

diff --git a/drivers/gpio/gpio-regmap.c b/drivers/gpio/gpio-regmap.c
index 5412cb3b0b2a..23b0a8572f53 100644
--- a/drivers/gpio/gpio-regmap.c
+++ b/drivers/gpio/gpio-regmap.c
@@ -11,26 +11,6 @@
 #include <linux/module.h>
 #include <linux/regmap.h>
 
-struct gpio_regmap {
-	struct device *parent;
-	struct regmap *regmap;
-	struct gpio_chip gpio_chip;
-
-	int reg_stride;
-	int ngpio_per_reg;
-	unsigned int reg_dat_base;
-	unsigned int reg_set_base;
-	unsigned int reg_clr_base;
-	unsigned int reg_dir_in_base;
-	unsigned int reg_dir_out_base;
-
-	int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base,
-			      unsigned int offset, unsigned int *reg,
-			      unsigned int *mask);
-
-	void *driver_data;
-};
-
 static unsigned int gpio_regmap_addr(unsigned int addr)
 {
 	if (addr == GPIO_REGMAP_ADDR_ZERO)
diff --git a/include/linux/gpio/regmap.h b/include/linux/gpio/regmap.h
index ad76f3d0a6ba..ce2fc6e9b62b 100644
--- a/include/linux/gpio/regmap.h
+++ b/include/linux/gpio/regmap.h
@@ -4,13 +4,52 @@
 #define _LINUX_GPIO_REGMAP_H
 
 struct device;
-struct gpio_regmap;
 struct irq_domain;
 struct regmap;
 
 #define GPIO_REGMAP_ADDR_ZERO ((unsigned int)(-1))
 #define GPIO_REGMAP_ADDR(addr) ((addr) ? : GPIO_REGMAP_ADDR_ZERO)
 
+/**
+ * struct gpio_regmap - GPIO regmap controller
+ * @parent:		The parent device
+ * @regmap:		The regmap used to access the registers
+ *			given, the name of the device is used
+ * @gpio_chip:		GPIO chip controller
+ * @ngpio_per_reg:	Number of GPIOs per register
+ * @reg_stride:		(Optional) May be set if the registers (of the
+ *			same type, dat, set, etc) are not consecutive.
+ * @reg_dat_base:	(Optional) (in) register base address
+ * @reg_set_base:	(Optional) set register base address
+ * @reg_clr_base:	(Optional) clear register base address
+ * @reg_dir_in_base:	(Optional) in setting register base address
+ * @reg_dir_out_base:	(Optional) out setting register base address
+ * @reg_mask_xlate:     (Optional) Translates base address and GPIO
+ *			offset to a register/bitmask pair. If not
+ *			given the default gpio_regmap_simple_xlate()
+ *			is used.
+ * @driver_data:	(Optional) driver-private data
+ */
+struct gpio_regmap {
+	struct device *parent;
+	struct regmap *regmap;
+	struct gpio_chip gpio_chip;
+
+	int reg_stride;
+	int ngpio_per_reg;
+	unsigned int reg_dat_base;
+	unsigned int reg_set_base;
+	unsigned int reg_clr_base;
+	unsigned int reg_dir_in_base;
+	unsigned int reg_dir_out_base;
+
+	int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base,
+			      unsigned int offset, unsigned int *reg,
+			      unsigned int *mask);
+
+	void *driver_data;
+};
+
 /**
  * struct gpio_regmap_config - Description of a generic regmap gpio_chip.
  * @parent:		The parent device
-- 
2.20.1