Re: [PATCH 04/12] pinctrl: add a pincontrol driver for BCM6358

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

On Thu, Feb 25, 2021 at 5:42 PM Álvaro Fernández Rojas
<noltari@xxxxxxxxx> wrote:

> Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different
> functions onto the GPIO pins. It does not support configuring individual
> pins but only whole groups. These groups may overlap, and still require
> the directions to be set correctly in the GPIO register. In addition the
> functions register controls other, not directly mux related functions.
>
> Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
> Signed-off-by: Jonas Gorski <jonas.gorski@xxxxxxxxx>

All of my review comments on the first driver in the series goes
for this one as well, so copy/paste all my comments from there :D

The good thing is once you get it right in one driver you will get it
right in all of them.

Consider bringing all common code together in a main driver
shared by all these pin controllers as per the pattern of other
pin controllers (se qcom for example).

Yours,
Linus Walleij