Re: [GIT PULL] ib-drm-gpio-pdx86-rtc-wdt-v5.12-1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 26, 2021 at 9:53 PM Andy Shevchenko
<andy.shevchenko@xxxxxxxxx> wrote:
>
> On Tue, Jan 26, 2021 at 8:33 PM Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
> > On 1/26/21 6:14 PM, Andy Shevchenko wrote:
> > > On Tue, Jan 26, 2021 at 6:55 PM Patrik Jakobsson
> > > <patrik.r.jakobsson@xxxxxxxxx> wrote:
> > >> On Tue, Jan 26, 2021 at 4:51 PM Andy Shevchenko
> > >> <andy.shevchenko@xxxxxxxxx> wrote:
> > >>> On Tue, Jan 26, 2021 at 5:25 PM Patrik Jakobsson
> > >>> <patrik.r.jakobsson@xxxxxxxxx> wrote:
> > >>>> On Tue, Jan 26, 2021 at 1:37 PM Andy Shevchenko
> > >>>> <andriy.shevchenko@xxxxxxxxxxxxxxx> wrote:
> > >>>>>
> > >>>>> Hi guys,
> > >>>>>
> > >>>>> This is first part of Intel MID outdated platforms removal. It's collected into
> > >>>>> immutable branch with a given tag, please pull to yours subsystems.
> > >>>>
> > >>>> Hi Andy,
> > >>>> Do you plan on eventually removing X86_INTEL_MID completely? If so,
> > >>>> then I should probably start looking at removing the corresponding
> > >>>> parts in GMA500.
> > >>>
> > >>> Nope. It is related to only Medfield / Clovertrail platforms.
> > >>>
> > >>> There are other (MID) platforms that may / might utilize this driver
> > >>> in the future.
> > >>
> > >> Right, there's still Oaktrail / Moorestown with hardware in the wild.
> > >
> > > Actually Moorestown had to be removed a few years ago (kernel won't
> > > boot on them anyway from that date when Alan removed support under
> > > arch/x86 for it).

Ok. I lump Moorestown and Oaktrail together since they have the same
Z6xx series CPU/GPU (GMA600). I still have a working Oaktrail device
so that support should stay in gma500.

> > >
> > > I'm talking about Merrifield and Moorefield that can utilize it and
> > > also some other platforms that are not SFI based (Cedar something...
> > > IIRC).
> >
> > Yes at least there are some 64 bit capable SoCs with GMA500 which were
> > used in NAS like devices. These NAS-es actually have a VGA output
> > (and maybe also DVI?) which is attached to the GMA500.

Yes these should be Cedarview/Cedartrail. Some of them are 64-bit and
some are 32-bit. I think it came down to if bios enabled it or not.
Cedarview comes with VGA, DVI and eDP/DP. Quite a few Cedarview
devices exist in the wild.

>
> Since you are talking about 64-bit, definitely they are *not*
> Moorestown, Medfield, Clovertrail since the mentioned never were
> 64-bit. But it would be nice to see the CPU model number to be sure.
>
> > I know people are running Fedora on these, so we should at least keep
> > these supported.
>
> Is it possible to gather the CPU model number from them? (Or at least
> the exact device/box name)

Yes, it would be interesting to know more about Clovertrail. gma500
only supports up to the Cedarview GPUs but Clovertrail might also use
a Cedarview GPU.

-Patrik



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux