From: Arnd Bergmann <arnd@xxxxxxxx>
The zte zx platform is getting removed, so this driver is no
longer needed.
Cc: Jun Nie <jun.nie@xxxxxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
.../bindings/pinctrl/pinctrl-zx.txt | 84 --
drivers/pinctrl/Kconfig | 1 -
drivers/pinctrl/Makefile | 1 -
drivers/pinctrl/zte/Kconfig | 14 -
drivers/pinctrl/zte/Makefile | 3 -
drivers/pinctrl/zte/pinctrl-zx.c | 445 -------
drivers/pinctrl/zte/pinctrl-zx.h | 102 --
drivers/pinctrl/zte/pinctrl-zx296718.c | 1024 -----------------
8 files changed, 1674 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt
delete mode 100644 drivers/pinctrl/zte/Kconfig
delete mode 100644 drivers/pinctrl/zte/Makefile
delete mode 100644 drivers/pinctrl/zte/pinctrl-zx.c
delete mode 100644 drivers/pinctrl/zte/pinctrl-zx.h
delete mode 100644 drivers/pinctrl/zte/pinctrl-zx296718.c
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt
deleted file mode 100644
index 39170f372599..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-* ZTE ZX Pin Controller
-
-The pin controller on ZTE ZX platforms is kinda of hybrid. It consists of
-a main controller and an auxiliary one. For example, on ZX296718 SoC, the
-main controller is TOP_PMM and the auxiliary one is AON_IOCFG. Both
-controllers work together to control pin multiplexing and configuration in
-the way illustrated as below.
-
-
- GMII_RXD3 ---+
- |
- DVI1_HS ---+----------------------------- GMII_RXD3 (TOP pin)
- |
- BGPIO16 ---+ ^
- | pinconf
- ^ |
- | pinmux |
- | |
-
- TOP_PMM (main) AON_IOCFG (aux)
-
- | | |
- | pinmux | |
- | pinmux v |
- v | pinconf
- KEY_ROW2 ---+ v
- PORT1_LCD_TE ---+ |
- | AGPIO10 ---+------ KEY_ROW2 (AON pin)
- I2S0_DOUT3 ---+ |
- |-----------------------+
- PWM_OUT3 ---+
- |
- VGA_VS1 ---+
-
-
-For most of pins like GMII_RXD3 in the figure, the pinmux function is
-controlled by TOP_PMM block only, and this type of pins are meant by term
-'TOP pins'. For pins like KEY_ROW2, the pinmux is controlled by both
-TOP_PMM and AON_IOCFG blocks, as the available multiplexing functions for
-the pin spread in both controllers. This type of pins are called 'AON pins'.
-Though pinmux implementation is quite different, pinconf is same for both
-types of pins. Both are controlled by auxiliary controller, i.e. AON_IOCFG
-on ZX296718.
-
-Required properties:
-- compatible: should be "zte,zx296718-pmm".
-- reg: the register physical address and length.
-- zte,auxiliary-controller: phandle to the auxiliary pin controller which
- implements pinmux for AON pins and pinconf for all pins.
-
-The following pin configuration are supported. Please refer to
-pinctrl-bindings.txt in this directory for more details of the common
-pinctrl bindings used by client devices.
-
-- bias-pull-up
-- bias-pull-down
-- drive-strength
-- input-enable
-- slew-rate
-
-Examples:
-
-iocfg: pin-controller@119000 {
- compatible = "zte,zx296718-iocfg";
- reg = <0x119000 0x1000>;
-};
-
-pmm: pin-controller@1462000 {
- compatible = "zte,zx296718-pmm";
- reg = <0x1462000 0x1000>;
- zte,auxiliary-controller = <&iocfg>;
-};
-
-&pmm {
- vga_pins: vga {
- pins = "KEY_COL1", "KEY_COL2", "KEY_ROW1", "KEY_ROW2";
- function = "VGA";
- };
-};
-
-&vga {
- pinctrl-names = "default";
- pinctrl-0 = <&vga_pins>;
-};
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index d4b2f2e2ed75..1c1fa681b96d 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -417,7 +417,6 @@ source "drivers/pinctrl/ti/Kconfig"
source "drivers/pinctrl/uniphier/Kconfig"
source "drivers/pinctrl/vt8500/Kconfig"
source "drivers/pinctrl/mediatek/Kconfig"
-source "drivers/pinctrl/zte/Kconfig"
source "drivers/pinctrl/meson/Kconfig"
source "drivers/pinctrl/cirrus/Kconfig"
source "drivers/pinctrl/visconti/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 5bb9bb6cc3ce..fef92794900d 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -71,6 +71,5 @@ obj-y += ti/
obj-$(CONFIG_PINCTRL_UNIPHIER) += uniphier/
obj-$(CONFIG_ARCH_VT8500) += vt8500/
obj-y += mediatek/
-obj-$(CONFIG_PINCTRL_ZX) += zte/
obj-y += cirrus/
obj-$(CONFIG_PINCTRL_VISCONTI) += visconti/
diff --git a/drivers/pinctrl/zte/Kconfig b/drivers/pinctrl/zte/Kconfig
deleted file mode 100644
index 4fdc70511034..000000000000
--- a/drivers/pinctrl/zte/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-config PINCTRL_ZX
- bool
- select PINMUX
- select GENERIC_PINCONF
- select GENERIC_PINCTRL_GROUPS
- select GENERIC_PINMUX_FUNCTIONS
-
-config PINCTRL_ZX296718
- bool "ZTE ZX296718 pinctrl driver"
- depends on OF && ARCH_ZX
- select PINCTRL_ZX
- help
- Say Y here to enable the ZX296718 pinctrl driver
diff --git a/drivers/pinctrl/zte/Makefile b/drivers/pinctrl/zte/Makefile
deleted file mode 100644
index 2084c7810f96..000000000000
--- a/drivers/pinctrl/zte/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_PINCTRL_ZX) += pinctrl-zx.o
-obj-$(CONFIG_PINCTRL_ZX296718) += pinctrl-zx296718.o
diff --git a/drivers/pinctrl/zte/pinctrl-zx.c b/drivers/pinctrl/zte/pinctrl-zx.c
deleted file mode 100644
index 80d00ab8c110..000000000000
--- a/drivers/pinctrl/zte/pinctrl-zx.c
+++ /dev/null
@@ -1,445 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2017 Sanechips Technology Co., Ltd.
- * Copyright 2017 Linaro Ltd.
- */
-
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/pinctrl/pinmux.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include "../core.h"
-#include "../pinctrl-utils.h"
-#include "../pinmux.h"
-#include "pinctrl-zx.h"
-
-#define ZX_PULL_DOWN BIT(0)
-#define ZX_PULL_UP BIT(1)
-#define ZX_INPUT_ENABLE BIT(3)
-#define ZX_DS_SHIFT 4
-#define ZX_DS_MASK (0x7 << ZX_DS_SHIFT)
-#define ZX_DS_VALUE(x) (((x) << ZX_DS_SHIFT) & ZX_DS_MASK)
-#define ZX_SLEW BIT(8)
-
-struct zx_pinctrl {
- struct pinctrl_dev *pctldev;
- struct device *dev;
- void __iomem *base;
- void __iomem *aux_base;
- spinlock_t lock;
- struct zx_pinctrl_soc_info *info;
-};
-
-static int zx_dt_node_to_map(struct pinctrl_dev *pctldev,
- struct device_node *np_config,
- struct pinctrl_map **map, u32 *num_maps)
-{
- return pinconf_generic_dt_node_to_map(pctldev, np_config, map,
- num_maps, PIN_MAP_TYPE_INVALID);
-}
-
-static const struct pinctrl_ops zx_pinctrl_ops = {
- .dt_node_to_map = zx_dt_node_to_map,
- .dt_free_map = pinctrl_utils_free_map,
- .get_groups_count = pinctrl_generic_get_group_count,
- .get_group_name = pinctrl_generic_get_group_name,
- .get_group_pins = pinctrl_generic_get_group_pins,
-};
-
-#define NONAON_MVAL 2
-
-static int zx_set_mux(struct pinctrl_dev *pctldev, unsigned int func_selector,
- unsigned int group_selector)
-{
- struct zx_pinctrl *zpctl = pinctrl_dev_get_drvdata(pctldev);
- struct zx_pinctrl_soc_info *info = zpctl->info;
- const struct pinctrl_pin_desc *pindesc = info->pins + group_selector;
- struct zx_pin_data *data = pindesc->drv_data;
- struct zx_mux_desc *mux;
- u32 mask, offset, bitpos;
- struct function_desc *func;
- unsigned long flags;
- u32 val, mval;
-
- /* Skip reserved pin */
- if (!data)
- return -EINVAL;
-
- mux = data->muxes;
- mask = (1 << data->width) - 1;
- offset = data->offset;
- bitpos = data->bitpos;
-
- func = pinmux_generic_get_function(pctldev, func_selector);
- if (!func)
- return -EINVAL;
-
- while (mux->name) {
- if (strcmp(mux->name, func->name) == 0)
- break;
- mux++;
- }
-
- /* Found mux value to be written */
- mval = mux->muxval;
-
- spin_lock_irqsave(&zpctl->lock, flags);
-
- if (data->aon_pin) {
- /*
- * It's an AON pin, whose mux register offset and bit position
- * can be calculated from pin number. Each register covers 16
- * pins, and each pin occupies 2 bits.
- */
- u16 aoffset = pindesc->number / 16 * 4;
- u16 abitpos = (pindesc->number % 16) * 2;
-
- if (mval & AON_MUX_FLAG) {
- /*
- * This is a mux value that needs to be written into
- * AON pinmux register. Write it and then we're done.
- */
- val = readl(zpctl->aux_base + aoffset);
- val &= ~(0x3 << abitpos);
- val |= (mval & 0x3) << abitpos;
- writel(val, zpctl->aux_base + aoffset);
- } else {
- /*
- * It's a mux value that needs to be written into TOP
- * pinmux register.
- */
- val = readl(zpctl->base + offset);
- val &= ~(mask << bitpos);
- val |= (mval & mask) << bitpos;
- writel(val, zpctl->base + offset);
-
- /*
- * In this case, the AON pinmux register needs to be
- * set up to select non-AON function.
- */
- val = readl(zpctl->aux_base + aoffset);
- val &= ~(0x3 << abitpos);
- val |= NONAON_MVAL << abitpos;
- writel(val, zpctl->aux_base + aoffset);
- }
-
- } else {
- /*
- * This is a TOP pin, and we only need to set up TOP pinmux
- * register and then we're done with it.
- */
- val = readl(zpctl->base + offset);
- val &= ~(mask << bitpos);
- val |= (mval & mask) << bitpos;
- writel(val, zpctl->base + offset);
- }
-
- spin_unlock_irqrestore(&zpctl->lock, flags);
-
- return 0;
-}
-
-static const struct pinmux_ops zx_pinmux_ops = {
- .get_functions_count = pinmux_generic_get_function_count,
- .get_function_name = pinmux_generic_get_function_name,
- .get_function_groups = pinmux_generic_get_function_groups,
- .set_mux = zx_set_mux,
-};
-
-static int zx_pin_config_get(struct pinctrl_dev *pctldev, unsigned int pin,
- unsigned long *config)
-{
- struct zx_pinctrl *zpctl = pinctrl_dev_get_drvdata(pctldev);
- struct zx_pinctrl_soc_info *info = zpctl->info;
- const struct pinctrl_pin_desc *pindesc = info->pins + pin;
- struct zx_pin_data *data = pindesc->drv_data;
- enum pin_config_param param = pinconf_to_config_param(*config);
- u32 val;
-
- /* Skip reserved pin */
- if (!data)
- return -EINVAL;
-
- val = readl(zpctl->aux_base + data->coffset);
- val = val >> data->cbitpos;
-
- switch (param) {
- case PIN_CONFIG_BIAS_PULL_DOWN:
- val &= ZX_PULL_DOWN;
- val = !!val;
- if (val == 0)
- return -EINVAL;
- break;
- case PIN_CONFIG_BIAS_PULL_UP:
- val &= ZX_PULL_UP;
- val = !!val;
- if (val == 0)
- return -EINVAL;
- break;
- case PIN_CONFIG_INPUT_ENABLE:
- val &= ZX_INPUT_ENABLE;
- val = !!val;
- if (val == 0)
- return -EINVAL;
- break;
- case PIN_CONFIG_DRIVE_STRENGTH:
- val &= ZX_DS_MASK;
- val = val >> ZX_DS_SHIFT;
- break;
- case PIN_CONFIG_SLEW_RATE:
- val &= ZX_SLEW;
- val = !!val;
- break;
- default:
- return -ENOTSUPP;
- }
-
- *config = pinconf_to_config_packed(param, val);
-
- return 0;
-}
-
-static int zx_pin_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
- unsigned long *configs, unsigned int num_configs)
-{
- struct zx_pinctrl *zpctl = pinctrl_dev_get_drvdata(pctldev);
- struct zx_pinctrl_soc_info *info = zpctl->info;
- const struct pinctrl_pin_desc *pindesc = info->pins + pin;
- struct zx_pin_data *data = pindesc->drv_data;
- enum pin_config_param param;
- u32 val, arg;
- int i;
-
- /* Skip reserved pin */
- if (!data)
- return -EINVAL;
-
- val = readl(zpctl->aux_base + data->coffset);
-
- for (i = 0; i < num_configs; i++) {
- param = pinconf_to_config_param(configs[i]);
- arg = pinconf_to_config_argument(configs[i]);
-
- switch (param) {
- case PIN_CONFIG_BIAS_PULL_DOWN:
- val |= ZX_PULL_DOWN << data->cbitpos;
- break;
- case PIN_CONFIG_BIAS_PULL_UP:
- val |= ZX_PULL_UP << data->cbitpos;
- break;
- case PIN_CONFIG_INPUT_ENABLE:
- val |= ZX_INPUT_ENABLE << data->cbitpos;
- break;
- case PIN_CONFIG_DRIVE_STRENGTH:
- val &= ~(ZX_DS_MASK << data->cbitpos);
- val |= ZX_DS_VALUE(arg) << data->cbitpos;
- break;
- case PIN_CONFIG_SLEW_RATE:
- if (arg)
- val |= ZX_SLEW << data->cbitpos;
- else
- val &= ~ZX_SLEW << data->cbitpos;
- break;
- default:
- return -ENOTSUPP;
- }
- }
-
- writel(val, zpctl->aux_base + data->coffset);
- return 0;
-}
-
-static const struct pinconf_ops zx_pinconf_ops = {
- .pin_config_set = zx_pin_config_set,
- .pin_config_get = zx_pin_config_get,
- .is_generic = true,
-};
-
-static int zx_pinctrl_build_state(struct platform_device *pdev)
-{
- struct zx_pinctrl *zpctl = platform_get_drvdata(pdev);
- struct zx_pinctrl_soc_info *info = zpctl->info;
- struct pinctrl_dev *pctldev = zpctl->pctldev;
- struct function_desc *functions;
- int nfunctions;
- struct group_desc *groups;
- int ngroups;
- int i;
-
- /* Every single pin composes a group */
- ngroups = info->npins;
- groups = devm_kcalloc(&pdev->dev, ngroups, sizeof(*groups),
- GFP_KERNEL);
- if (!groups)
- return -ENOMEM;
-
- for (i = 0; i < ngroups; i++) {
- const struct pinctrl_pin_desc *pindesc = info->pins + i;
- struct group_desc *group = groups + i;
-
- group->name = pindesc->name;
- group->pins = (int *) &pindesc->number;
- group->num_pins = 1;
- radix_tree_insert(&pctldev->pin_group_tree, i, group);
- }
-
- pctldev->num_groups = ngroups;
-
- /* Build function list from pin mux functions */
- functions = kcalloc(info->npins, sizeof(*functions), GFP_KERNEL);
- if (!functions)
- return -ENOMEM;
-
- nfunctions = 0;
- for (i = 0; i < info->npins; i++) {
- const struct pinctrl_pin_desc *pindesc = info->pins + i;
- struct zx_pin_data *data = pindesc->drv_data;
- struct zx_mux_desc *mux;
-
- /* Reserved pins do not have a drv_data at all */
- if (!data)
- continue;
-
- /* Loop over all muxes for the pin */
- mux = data->muxes;
- while (mux->name) {
- struct function_desc *func = functions;
-
- /* Search function list for given mux */
- while (func->name) {
- if (strcmp(mux->name, func->name) == 0) {
- /* Function exists */
- func->num_group_names++;
- break;
- }
- func++;
- }
-
- if (!func->name) {
- /* New function */
- func->name = mux->name;
- func->num_group_names = 1;
- radix_tree_insert(&pctldev->pin_function_tree,
- nfunctions++, func);
- }
-
- mux++;
- }
- }
-
- pctldev->num_functions = nfunctions;
- functions = krealloc(functions, nfunctions * sizeof(*functions),
- GFP_KERNEL);
-
- /* Find pin groups for every single function */
- for (i = 0; i < info->npins; i++) {
- const struct pinctrl_pin_desc *pindesc = info->pins + i;
- struct zx_pin_data *data = pindesc->drv_data;
- struct zx_mux_desc *mux;
-
- if (!data)
- continue;
-
- mux = data->muxes;
- while (mux->name) {
- struct function_desc *func;
- const char **group;
- int j;
-
- /* Find function for given mux */
- for (j = 0; j < nfunctions; j++)
- if (strcmp(functions[j].name, mux->name) == 0)
- break;
-
- func = functions + j;
- if (!func->group_names) {
- func->group_names = devm_kcalloc(&pdev->dev,
- func->num_group_names,
- sizeof(*func->group_names),
- GFP_KERNEL);
- if (!func->group_names) {
- kfree(functions);
- return -ENOMEM;
- }
- }
-
- group = func->group_names;
- while (*group)
- group++;
- *group = pindesc->name;
-
- mux++;
- }
- }
-
- return 0;
-}
-
-int zx_pinctrl_init(struct platform_device *pdev,
- struct zx_pinctrl_soc_info *info)
-{
- struct pinctrl_desc *pctldesc;
- struct zx_pinctrl *zpctl;
- struct device_node *np;
- int ret;
-
- zpctl = devm_kzalloc(&pdev->dev, sizeof(*zpctl), GFP_KERNEL);
- if (!zpctl)
- return -ENOMEM;
-
- spin_lock_init(&zpctl->lock);
-
- zpctl->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(zpctl->base))
- return PTR_ERR(zpctl->base);
-
- np = of_parse_phandle(pdev->dev.of_node, "zte,auxiliary-controller", 0);
- if (!np) {
- dev_err(&pdev->dev, "failed to find auxiliary controller\n");
- return -ENODEV;
- }
-
- zpctl->aux_base = of_iomap(np, 0);
- of_node_put(np);
- if (!zpctl->aux_base)
- return -ENOMEM;
-
- zpctl->dev = &pdev->dev;
- zpctl->info = info;
-
- pctldesc = devm_kzalloc(&pdev->dev, sizeof(*pctldesc), GFP_KERNEL);
- if (!pctldesc)
- return -ENOMEM;
-
- pctldesc->name = dev_name(&pdev->dev);
- pctldesc->owner = THIS_MODULE;
- pctldesc->pins = info->pins;
- pctldesc->npins = info->npins;
- pctldesc->pctlops = &zx_pinctrl_ops;
- pctldesc->pmxops = &zx_pinmux_ops;
- pctldesc->confops = &zx_pinconf_ops;
-
- zpctl->pctldev = devm_pinctrl_register(&pdev->dev, pctldesc, zpctl);
- if (IS_ERR(zpctl->pctldev)) {
- ret = PTR_ERR(zpctl->pctldev);
- dev_err(&pdev->dev, "failed to register pinctrl: %d\n", ret);
- return ret;
- }
-
- platform_set_drvdata(pdev, zpctl);
-
- ret = zx_pinctrl_build_state(pdev);
- if (ret) {
- dev_err(&pdev->dev, "failed to build state: %d\n", ret);
- return ret;
- }
-
- dev_info(&pdev->dev, "initialized pinctrl driver\n");
- return 0;
-}
diff --git a/drivers/pinctrl/zte/pinctrl-zx.h b/drivers/pinctrl/zte/pinctrl-zx.h
deleted file mode 100644
index a0692e2e9012..000000000000
--- a/drivers/pinctrl/zte/pinctrl-zx.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2017 Sanechips Technology Co., Ltd.
- * Copyright 2017 Linaro Ltd.
- */
-
-#ifndef __PINCTRL_ZX_H
-#define __PINCTRL_ZX_H
-
-/**
- * struct zx_mux_desc - hardware mux descriptor
- * @name: mux function name
- * @muxval: mux register bit value
- */
-struct zx_mux_desc {
- const char *name;
- u8 muxval;
-};
-
-/**
- * struct zx_pin_data - hardware per-pin data
- * @aon_pin: whether it's an AON pin
- * @offset: register offset within TOP pinmux controller
- * @bitpos: bit position within TOP pinmux register
- * @width: bit width within TOP pinmux register
- * @coffset: pinconf register offset within AON controller
- * @cbitpos: pinconf bit position within AON register
- * @muxes: available mux function names and corresponding register values
- *
- * Unlike TOP pinmux and AON pinconf registers which are arranged pretty
- * arbitrarily, AON pinmux register bits are well organized per pin id, and
- * each pin occupies two bits, so that we can calculate the AON register offset
- * and bit position from pin id. Thus, we only need to define TOP pinmux and
- * AON pinconf register data for the pin.
- */
-struct zx_pin_data {
- bool aon_pin;
- u16 offset;
- u16 bitpos;
- u16 width;
- u16 coffset;
- u16 cbitpos;
- struct zx_mux_desc *muxes;
-};
-
-struct zx_pinctrl_soc_info {
- const struct pinctrl_pin_desc *pins;
- unsigned int npins;
-};
-
-#define TOP_PIN(pin, off, bp, wd, coff, cbp, ...) { \
- .number = pin, \
- .name = #pin, \
- .drv_data = &(struct zx_pin_data) { \
- .aon_pin = false, \
- .offset = off, \
- .bitpos = bp, \
- .width = wd, \
- .coffset = coff, \
- .cbitpos = cbp, \
- .muxes = (struct zx_mux_desc[]) { \
- __VA_ARGS__, { } }, \
- }, \
-}
-
-#define AON_PIN(pin, off, bp, wd, coff, cbp, ...) { \
- .number = pin, \
- .name = #pin, \
- .drv_data = &(struct zx_pin_data) { \
- .aon_pin = true, \
- .offset = off, \
- .bitpos = bp, \
- .width = wd, \
- .coffset = coff, \
- .cbitpos = cbp, \
- .muxes = (struct zx_mux_desc[]) { \
- __VA_ARGS__, { } }, \
- }, \
-}
-
-#define ZX_RESERVED(pin) PINCTRL_PIN(pin, #pin)
-
-#define TOP_MUX(_val, _name) { \
- .name = _name, \
- .muxval = _val, \
-}
-
-/*
- * When the flag is set, it's a mux configuration for an AON pin that sits in
- * AON register. Otherwise, it's one for AON pin but sitting in TOP register.
- */
-#define AON_MUX_FLAG BIT(7)
-
-#define AON_MUX(_val, _name) { \
- .name = _name, \
- .muxval = _val | AON_MUX_FLAG, \
-}
-
-int zx_pinctrl_init(struct platform_device *pdev,
- struct zx_pinctrl_soc_info *info);
-
-#endif /* __PINCTRL_ZX_H */
diff --git a/drivers/pinctrl/zte/pinctrl-zx296718.c b/drivers/pinctrl/zte/pinctrl-zx296718.c
deleted file mode 100644
index c980aecb6f2f..000000000000
--- a/drivers/pinctrl/zte/pinctrl-zx296718.c
+++ /dev/null
@@ -1,1024 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2017 Sanechips Technology Co., Ltd.
- * Copyright 2017 Linaro Ltd.
- */
-
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/platform_device.h>
-
-#include "pinctrl-zx.h"
-
-#define TOP_REG0 0x00
-#define TOP_REG1 0x04
-#define TOP_REG2 0x08
-#define TOP_REG3 0x0c
-#define TOP_REG4 0x10
-#define TOP_REG5 0x14
-#define TOP_REG6 0x18
-#define TOP_REG7 0x1c
-#define TOP_REG8 0x20
-
-/*
- * The pin numbering starts from AON pins with reserved ones included,
- * so that register data like offset and bit position for AON pins can
- * be calculated from pin number.
- */
-enum zx296718_pin {
- /* aon_pmm_reg_0 */
- I2C3_SCL = 0,
- I2C3_SDA = 1,
- AON_RESERVED0 = 2,
- AON_RESERVED1 = 3,
- SEC_EN = 4,
- UART0_RXD = 5,
- UART0_TXD = 6,
- IR_IN = 7,
- SPI0_CLK = 8,
- SPI0_CS = 9,
- SPI0_TXD = 10,
- SPI0_RXD = 11,
- KEY_COL0 = 12,
- KEY_COL1 = 13,
- KEY_COL2 = 14,
- KEY_ROW0 = 15,
-
- /* aon_pmm_reg_1 */
- KEY_ROW1 = 16,
- KEY_ROW2 = 17,
- HDMI_SCL = 18,
- HDMI_SDA = 19,
- JTAG_TCK = 20,
- JTAG_TRSTN = 21,
- JTAG_TMS = 22,
- JTAG_TDI = 23,
- JTAG_TDO = 24,
- I2C0_SCL = 25,
- I2C0_SDA = 26,
- I2C1_SCL = 27,
- I2C1_SDA = 28,
- AON_RESERVED2 = 29,
- AON_RESERVED3 = 30,
- AON_RESERVED4 = 31,
-
- /* aon_pmm_reg_2 */
- SPI1_CLK = 32,
- SPI1_CS = 33,
- SPI1_TXD = 34,
- SPI1_RXD = 35,
- AON_RESERVED5 = 36,
- AON_RESERVED6 = 37,
- AUDIO_DET = 38,
- SPDIF_OUT = 39,
- HDMI_CEC = 40,
- HDMI_HPD = 41,
- GMAC_25M_OUT = 42,
- BOOT_SEL0 = 43,
- BOOT_SEL1 = 44,
- BOOT_SEL2 = 45,
- DEEP_SLEEP_OUT_N = 46,
- AON_RESERVED7 = 47,
-
- /* top_pmm_reg_0 */
- GMII_GTX_CLK = 48,
- GMII_TX_CLK = 49,
- GMII_TXD0 = 50,
- GMII_TXD1 = 51,
- GMII_TXD2 = 52,
- GMII_TXD3 = 53,
- GMII_TXD4 = 54,
- GMII_TXD5 = 55,
- GMII_TXD6 = 56,
- GMII_TXD7 = 57,
- GMII_TX_ER = 58,
- GMII_TX_EN = 59,
- GMII_RX_CLK = 60,
- GMII_RXD0 = 61,
- GMII_RXD1 = 62,
- GMII_RXD2 = 63,
-
- /* top_pmm_reg_1 */
- GMII_RXD3 = 64,
- GMII_RXD4 = 65,
- GMII_RXD5 = 66,
- GMII_RXD6 = 67,
- GMII_RXD7 = 68,
- GMII_RX_ER = 69,
- GMII_RX_DV = 70,
- GMII_COL = 71,
- GMII_CRS = 72,
- GMII_MDC = 73,
- GMII_MDIO = 74,
- SDIO1_CLK = 75,
- SDIO1_CMD = 76,
- SDIO1_DATA0 = 77,
- SDIO1_DATA1 = 78,
- SDIO1_DATA2 = 79,
-
- /* top_pmm_reg_2 */
- SDIO1_DATA3 = 80,
- SDIO1_CD = 81,
- SDIO1_WP = 82,
- USIM1_CD = 83,
- USIM1_CLK = 84,
- USIM1_RST = 85,
-
- /* top_pmm_reg_3 */
- USIM1_DATA = 86,
- SDIO0_CLK = 87,
- SDIO0_CMD = 88,
- SDIO0_DATA0 = 89,
- SDIO0_DATA1 = 90,
- SDIO0_DATA2 = 91,
- SDIO0_DATA3 = 92,
- SDIO0_CD = 93,
- SDIO0_WP = 94,
-
- /* top_pmm_reg_4 */
- TSI0_DATA0 = 95,
- SPINOR_CLK = 96,
- TSI2_DATA = 97,
- TSI2_CLK = 98,
- TSI2_SYNC = 99,
- TSI2_VALID = 100,
- SPINOR_CS = 101,
- SPINOR_DQ0 = 102,
- SPINOR_DQ1 = 103,
- SPINOR_DQ2 = 104,
- SPINOR_DQ3 = 105,
- VGA_HS = 106,
- VGA_VS = 107,
- TSI3_DATA = 108,
-
- /* top_pmm_reg_5 */
- TSI3_CLK = 109,
- TSI3_SYNC = 110,
- TSI3_VALID = 111,
- I2S1_WS = 112,
- I2S1_BCLK = 113,
- I2S1_MCLK = 114,
- I2S1_DIN0 = 115,
- I2S1_DOUT0 = 116,
- SPI3_CLK = 117,
- SPI3_CS = 118,
- SPI3_TXD = 119,
- NAND_LDO_MS18_SEL = 120,
-
- /* top_pmm_reg_6 */
- SPI3_RXD = 121,
- I2S0_MCLK = 122,
- I2S0_BCLK = 123,
- I2S0_WS = 124,
- I2S0_DIN0 = 125,
- I2S0_DOUT0 = 126,
- I2C5_SCL = 127,
- I2C5_SDA = 128,
- SPI2_CLK = 129,
- SPI2_CS = 130,
- SPI2_TXD = 131,
-
- /* top_pmm_reg_7 */
- SPI2_RXD = 132,
- NAND_WP_N = 133,
- NAND_PAGE_SIZE0 = 134,
- NAND_PAGE_SIZE1 = 135,
- NAND_ADDR_CYCLE = 136,
- NAND_RB0 = 137,
- NAND_RB1 = 138,
- NAND_RB2 = 139,
- NAND_RB3 = 140,
-
- /* top_pmm_reg_8 */
- GMAC_125M_IN = 141,
- GMAC_50M_OUT = 142,
- SPINOR_SSCLK_LOOPBACK = 143,
- SPINOR_SDIO1CLK_LOOPBACK = 144,
-};
-
-static const struct pinctrl_pin_desc zx296718_pins[] = {
- /* aon_pmm_reg_0 */
- AON_PIN(I2C3_SCL, TOP_REG2, 18, 2, 0x48, 0,
- AON_MUX(0x0, "ANMI"), /* anmi */
- AON_MUX(0x1, "AGPIO"), /* agpio29 */
- AON_MUX(0x2, "nonAON"), /* pin0 */
- AON_MUX(0x3, "EXT_INT"), /* int4 */
- TOP_MUX(0x0, "I2C3"), /* scl */
- TOP_MUX(0x1, "SPI2"), /* txd */
- TOP_MUX(0x2, "I2S1")), /* din0 */
- AON_PIN(I2C3_SDA, TOP_REG2, 20, 2, 0x48, 9,
- AON_MUX(0x0, "WD"), /* rst_b */
- AON_MUX(0x1, "AGPIO"), /* agpio30 */
- AON_MUX(0x2, "nonAON"), /* pin1 */
- AON_MUX(0x3, "EXT_INT"), /* int5 */
- TOP_MUX(0x0, "I2C3"), /* sda */
- TOP_MUX(0x1, "SPI2"), /* rxd */
- TOP_MUX(0x2, "I2S0")), /* mclk */
- ZX_RESERVED(AON_RESERVED0),
- ZX_RESERVED(AON_RESERVED1),
- AON_PIN(SEC_EN, TOP_REG3, 5, 1, 0x50, 0,
- AON_MUX(0x0, "SEC"), /* en */
- AON_MUX(0x1, "AGPIO"), /* agpio28 */
- AON_MUX(0x2, "nonAON"), /* pin3 */
- AON_MUX(0x3, "EXT_INT"), /* int7 */
- TOP_MUX(0x0, "I2C2"), /* sda */
- TOP_MUX(0x1, "SPI2")), /* cs */
- AON_PIN(UART0_RXD, 0, 0, 0, 0x50, 9,
- AON_MUX(0x0, "UART0"), /* rxd */
- AON_MUX(0x1, "AGPIO"), /* agpio20 */
- AON_MUX(0x2, "nonAON")), /* pin34 */
- AON_PIN(UART0_TXD, 0, 0, 0, 0x50, 18,
- AON_MUX(0x0, "UART0"), /* txd */
- AON_MUX(0x1, "AGPIO"), /* agpio21 */
- AON_MUX(0x2, "nonAON")), /* pin32 */
- AON_PIN(IR_IN, 0, 0, 0, 0x64, 0,
- AON_MUX(0x0, "IR"), /* in */
- AON_MUX(0x1, "AGPIO"), /* agpio0 */
- AON_MUX(0x2, "nonAON")), /* pin27 */
- AON_PIN(SPI0_CLK, TOP_REG3, 16, 1, 0x64, 9,
- AON_MUX(0x0, "EXT_INT"), /* int0 */
- AON_MUX(0x1, "AGPIO"), /* agpio23 */
- AON_MUX(0x2, "nonAON"), /* pin5 */
- AON_MUX(0x3, "PCU"), /* test6 */
- TOP_MUX(0x0, "SPI0"), /* clk */
- TOP_MUX(0x1, "ISP")), /* flash_trig */
- AON_PIN(SPI0_CS, TOP_REG3, 17, 1, 0x64, 18,
- AON_MUX(0x0, "EXT_INT"), /* int1 */
- AON_MUX(0x1, "AGPIO"), /* agpio24 */
- AON_MUX(0x2, "nonAON"), /* pin6 */
- AON_MUX(0x3, "PCU"), /* test0 */
- TOP_MUX(0x0, "SPI0"), /* cs */
- TOP_MUX(0x1, "ISP")), /* prelight_trig */
- AON_PIN(SPI0_TXD, TOP_REG3, 18, 1, 0x68, 0,
- AON_MUX(0x0, "EXT_INT"), /* int2 */
- AON_MUX(0x1, "AGPIO"), /* agpio25 */
- AON_MUX(0x2, "nonAON"), /* pin7 */
- AON_MUX(0x3, "PCU"), /* test1 */
- TOP_MUX(0x0, "SPI0"), /* txd */
- TOP_MUX(0x1, "ISP")), /* shutter_trig */
- AON_PIN(SPI0_RXD, TOP_REG3, 19, 1, 0x68, 9,
- AON_MUX(0x0, "EXT_INT"), /* int3 */
- AON_MUX(0x1, "AGPIO"), /* agpio26 */
- AON_MUX(0x2, "nonAON"), /* pin8 */
- AON_MUX(0x3, "PCU"), /* test2 */
- TOP_MUX(0x0, "SPI0"), /* rxd */
- TOP_MUX(0x1, "ISP")), /* shutter_open */
- AON_PIN(KEY_COL0, TOP_REG3, 20, 1, 0x68, 18,
- AON_MUX(0x0, "KEY"), /* col0 */
- AON_MUX(0x1, "AGPIO"), /* agpio5 */
- AON_MUX(0x2, "nonAON"), /* pin9 */
- AON_MUX(0x3, "PCU"), /* test3 */
- TOP_MUX(0x0, "UART3"), /* rxd */
- TOP_MUX(0x1, "I2S0")), /* din1 */
- AON_PIN(KEY_COL1, TOP_REG3, 21, 2, 0x6c, 0,
- AON_MUX(0x0, "KEY"), /* col1 */
- AON_MUX(0x1, "AGPIO"), /* agpio6 */
- AON_MUX(0x2, "nonAON"), /* pin10 */
- TOP_MUX(0x0, "UART3"), /* txd */
- TOP_MUX(0x1, "I2S0"), /* din2 */
- TOP_MUX(0x2, "VGA")), /* scl */
- AON_PIN(KEY_COL2, TOP_REG3, 23, 2, 0x6c, 9,
- AON_MUX(0x0, "KEY"), /* col2 */
- AON_MUX(0x1, "AGPIO"), /* agpio7 */
- AON_MUX(0x2, "nonAON"), /* pin11 */
- TOP_MUX(0x0, "PWM"), /* out1 */
- TOP_MUX(0x1, "I2S0"), /* din3 */
- TOP_MUX(0x2, "VGA")), /* sda */
- AON_PIN(KEY_ROW0, 0, 0, 0, 0x6c, 18,
- AON_MUX(0x0, "KEY"), /* row0 */
- AON_MUX(0x1, "AGPIO"), /* agpio8 */
- AON_MUX(0x2, "nonAON"), /* pin33 */
- AON_MUX(0x3, "WD")), /* rst_b */
-
- /* aon_pmm_reg_1 */
- AON_PIN(KEY_ROW1, TOP_REG3, 25, 2, 0x70, 0,
- AON_MUX(0x0, "KEY"), /* row1 */
- AON_MUX(0x1, "AGPIO"), /* agpio9 */
- AON_MUX(0x2, "nonAON"), /* pin12 */
- TOP_MUX(0x0, "LCD"), /* port0 lcd_te */
- TOP_MUX(0x1, "I2S0"), /* dout2 */
- TOP_MUX(0x2, "PWM"), /* out2 */
- TOP_MUX(0x3, "VGA")), /* hs1 */
- AON_PIN(KEY_ROW2, TOP_REG3, 27, 2, 0x70, 9,
- AON_MUX(0x0, "KEY"), /* row2 */
- AON_MUX(0x1, "AGPIO"), /* agpio10 */
- AON_MUX(0x2, "nonAON"), /* pin13 */
- TOP_MUX(0x0, "LCD"), /* port1 lcd_te */
- TOP_MUX(0x1, "I2S0"), /* dout3 */
- TOP_MUX(0x2, "PWM"), /* out3 */
- TOP_MUX(0x3, "VGA")), /* vs1 */
- AON_PIN(HDMI_SCL, TOP_REG3, 29, 1, 0x70, 18,
- AON_MUX(0x0, "PCU"), /* test7 */
- AON_MUX(0x1, "AGPIO"), /* agpio3 */
- AON_MUX(0x2, "nonAON"), /* pin14 */
- TOP_MUX(0x0, "HDMI"), /* scl */
- TOP_MUX(0x1, "UART3")), /* rxd */
- AON_PIN(HDMI_SDA, TOP_REG3, 30, 1, 0x74, 0,
- AON_MUX(0x0, "PCU"), /* test8 */
- AON_MUX(0x1, "AGPIO"), /* agpio4 */
- AON_MUX(0x2, "nonAON"), /* pin15 */
- TOP_MUX(0x0, "HDMI"), /* sda */
- TOP_MUX(0x1, "UART3")), /* txd */
- AON_PIN(JTAG_TCK, TOP_REG7, 3, 1, 0x78, 18,
- AON_MUX(0x0, "JTAG"), /* tck */
- AON_MUX(0x1, "AGPIO"), /* agpio11 */
- AON_MUX(0x2, "nonAON"), /* pin22 */
- AON_MUX(0x3, "EXT_INT"), /* int4 */
- TOP_MUX(0x0, "SPI4"), /* clk */
- TOP_MUX(0x1, "UART1")), /* rxd */
- AON_PIN(JTAG_TRSTN, TOP_REG7, 4, 1, 0xac, 0,
- AON_MUX(0x0, "JTAG"), /* trstn */
- AON_MUX(0x1, "AGPIO"), /* agpio12 */
- AON_MUX(0x2, "nonAON"), /* pin23 */
- AON_MUX(0x3, "EXT_INT"), /* int5 */
- TOP_MUX(0x0, "SPI4"), /* cs */
- TOP_MUX(0x1, "UART1")), /* txd */
- AON_PIN(JTAG_TMS, TOP_REG7, 5, 1, 0xac, 9,
- AON_MUX(0x0, "JTAG"), /* tms */
- AON_MUX(0x1, "AGPIO"), /* agpio13 */
- AON_MUX(0x2, "nonAON"), /* pin24 */
- AON_MUX(0x3, "EXT_INT"), /* int6 */
- TOP_MUX(0x0, "SPI4"), /* txd */
- TOP_MUX(0x1, "UART2")), /* rxd */
- AON_PIN(JTAG_TDI, TOP_REG7, 6, 1, 0xac, 18,
- AON_MUX(0x0, "JTAG"), /* tdi */
- AON_MUX(0x1, "AGPIO"), /* agpio14 */
- AON_MUX(0x2, "nonAON"), /* pin25 */
- AON_MUX(0x3, "EXT_INT"), /* int7 */
- TOP_MUX(0x0, "SPI4"), /* rxd */
- TOP_MUX(0x1, "UART2")), /* txd */
- AON_PIN(JTAG_TDO, 0, 0, 0, 0xb0, 0,
- AON_MUX(0x0, "JTAG"), /* tdo */
- AON_MUX(0x1, "AGPIO"), /* agpio15 */
- AON_MUX(0x2, "nonAON")), /* pin26 */
- AON_PIN(I2C0_SCL, 0, 0, 0, 0xb0, 9,
- AON_MUX(0x0, "I2C0"), /* scl */
- AON_MUX(0x1, "AGPIO"), /* agpio16 */
- AON_MUX(0x2, "nonAON")), /* pin28 */
- AON_PIN(I2C0_SDA, 0, 0, 0, 0xb0, 18,
- AON_MUX(0x0, "I2C0"), /* sda */
- AON_MUX(0x1, "AGPIO"), /* agpio17 */
- AON_MUX(0x2, "nonAON")), /* pin29 */
- AON_PIN(I2C1_SCL, TOP_REG8, 4, 1, 0xb4, 0,
- AON_MUX(0x0, "I2C1"), /* scl */
- AON_MUX(0x1, "AGPIO"), /* agpio18 */
- AON_MUX(0x2, "nonAON"), /* pin30 */
- TOP_MUX(0x0, "LCD")), /* port0 lcd_te */
- AON_PIN(I2C1_SDA, TOP_REG8, 5, 1, 0xb4, 9,
- AON_MUX(0x0, "I2C1"), /* sda */
- AON_MUX(0x1, "AGPIO"), /* agpio19 */
- AON_MUX(0x2, "nonAON"), /* pin31 */
- TOP_MUX(0x0, "LCD")), /* port1 lcd_te */
- ZX_RESERVED(AON_RESERVED2),
- ZX_RESERVED(AON_RESERVED3),
- ZX_RESERVED(AON_RESERVED4),
-
- /* aon_pmm_reg_2 */
- AON_PIN(SPI1_CLK, TOP_REG2, 6, 3, 0x40, 9,
- AON_MUX(0x0, "EXT_INT"), /* int0 */
- AON_MUX(0x1, "PCU"), /* test12 */
- AON_MUX(0x2, "nonAON"), /* pin39 */
- TOP_MUX(0x0, "SPI1"), /* clk */
- TOP_MUX(0x1, "PCM"), /* clk */
- TOP_MUX(0x2, "BGPIO"), /* gpio35 */
- TOP_MUX(0x3, "I2C4"), /* scl */
- TOP_MUX(0x4, "I2S1"), /* mclk */
- TOP_MUX(0x5, "ISP")), /* flash_trig */
- AON_PIN(SPI1_CS, TOP_REG2, 9, 3, 0x40, 18,
- AON_MUX(0x0, "EXT_INT"), /* int1 */
- AON_MUX(0x1, "PCU"), /* test13 */
- AON_MUX(0x2, "nonAON"), /* pin40 */
- TOP_MUX(0x0, "SPI1"), /* cs */
- TOP_MUX(0x1, "PCM"), /* fs */
- TOP_MUX(0x2, "BGPIO"), /* gpio36 */
- TOP_MUX(0x3, "I2C4"), /* sda */
- TOP_MUX(0x4, "I2S1"), /* bclk */
- TOP_MUX(0x5, "ISP")), /* prelight_trig */
- AON_PIN(SPI1_TXD, TOP_REG2, 12, 3, 0x44, 0,
- AON_MUX(0x0, "EXT_INT"), /* int2 */
- AON_MUX(0x1, "PCU"), /* test14 */
- AON_MUX(0x2, "nonAON"), /* pin41 */
- TOP_MUX(0x0, "SPI1"), /* txd */
- TOP_MUX(0x1, "PCM"), /* txd */
- TOP_MUX(0x2, "BGPIO"), /* gpio37 */
- TOP_MUX(0x3, "UART5"), /* rxd */
- TOP_MUX(0x4, "I2S1"), /* ws */
- TOP_MUX(0x5, "ISP")), /* shutter_trig */
- AON_PIN(SPI1_RXD, TOP_REG2, 15, 3, 0x44, 9,
- AON_MUX(0x0, "EXT_INT"), /* int3 */
- AON_MUX(0x1, "PCU"), /* test15 */
- AON_MUX(0x2, "nonAON"), /* pin42 */
- TOP_MUX(0x0, "SPI1"), /* rxd */
- TOP_MUX(0x1, "PCM"), /* rxd */
- TOP_MUX(0x2, "BGPIO"), /* gpio38 */
- TOP_MUX(0x3, "UART5"), /* txd */
- TOP_MUX(0x4, "I2S1"), /* dout0 */
- TOP_MUX(0x5, "ISP")), /* shutter_open */
- ZX_RESERVED(AON_RESERVED5),
- ZX_RESERVED(AON_RESERVED6),
- AON_PIN(AUDIO_DET, TOP_REG3, 3, 2, 0x48, 18,
- AON_MUX(0x0, "PCU"), /* test4 */
- AON_MUX(0x1, "AGPIO"), /* agpio27 */
- AON_MUX(0x2, "nonAON"), /* pin2 */
- AON_MUX(0x3, "EXT_INT"), /* int16 */
- TOP_MUX(0x0, "AUDIO"), /* detect */
- TOP_MUX(0x1, "I2C2"), /* scl */
- TOP_MUX(0x2, "SPI2")), /* clk */
- AON_PIN(SPDIF_OUT, TOP_REG3, 14, 2, 0x78, 9,
- AON_MUX(0x0, "PCU"), /* test5 */
- AON_MUX(0x1, "AGPIO"), /* agpio22 */
- AON_MUX(0x2, "nonAON"), /* pin4 */
- TOP_MUX(0x0, "SPDIF"), /* out */
- TOP_MUX(0x1, "PWM"), /* out0 */
- TOP_MUX(0x2, "ISP")), /* fl_trig */
- AON_PIN(HDMI_CEC, 0, 0, 0, 0x74, 9,
- AON_MUX(0x0, "PCU"), /* test9 */
- AON_MUX(0x1, "AGPIO"), /* agpio1 */
- AON_MUX(0x2, "nonAON")), /* pin16 */
- AON_PIN(HDMI_HPD, 0, 0, 0, 0x74, 18,
- AON_MUX(0x0, "PCU"), /* test10 */
- AON_MUX(0x1, "AGPIO"), /* agpio2 */
- AON_MUX(0x2, "nonAON")), /* pin17 */
- AON_PIN(GMAC_25M_OUT, 0, 0, 0, 0x78, 0,
- AON_MUX(0x0, "PCU"), /* test11 */
- AON_MUX(0x1, "AGPIO"), /* agpio31 */
- AON_MUX(0x2, "nonAON")), /* pin43 */
- AON_PIN(BOOT_SEL0, 0, 0, 0, 0xc0, 9,
- AON_MUX(0x0, "BOOT"), /* sel0 */
- AON_MUX(0x1, "AGPIO"), /* agpio18 */
- AON_MUX(0x2, "nonAON")), /* pin18 */
- AON_PIN(BOOT_SEL1, 0, 0, 0, 0xc0, 18,
- AON_MUX(0x0, "BOOT"), /* sel1 */
- AON_MUX(0x1, "AGPIO"), /* agpio19 */
- AON_MUX(0x2, "nonAON")), /* pin19 */
- AON_PIN(BOOT_SEL2, 0, 0, 0, 0xc4, 0,
- AON_MUX(0x0, "BOOT"), /* sel2 */
- AON_MUX(0x1, "AGPIO"), /* agpio20 */
- AON_MUX(0x2, "nonAON")), /* pin20 */
- AON_PIN(DEEP_SLEEP_OUT_N, 0, 0, 0, 0xc4, 9,
- AON_MUX(0x0, "DEEPSLP"), /* deep sleep out_n */
- AON_MUX(0x1, "AGPIO"), /* agpio21 */
- AON_MUX(0x2, "nonAON")), /* pin21 */
- ZX_RESERVED(AON_RESERVED7),
-
- /* top_pmm_reg_0 */
- TOP_PIN(GMII_GTX_CLK, TOP_REG0, 0, 2, 0x10, 0,
- TOP_MUX(0x0, "GMII"), /* gtx_clk */
- TOP_MUX(0x1, "DVI0"), /* clk */
- TOP_MUX(0x2, "BGPIO")), /* gpio0 */
- TOP_PIN(GMII_TX_CLK, TOP_REG0, 2, 2, 0x10, 9,
- TOP_MUX(0x0, "GMII"), /* tx_clk */
- TOP_MUX(0x1, "DVI0"), /* vs */
- TOP_MUX(0x2, "BGPIO")), /* gpio1 */
- TOP_PIN(GMII_TXD0, TOP_REG0, 4, 2, 0x10, 18,
- TOP_MUX(0x0, "GMII"), /* txd0 */
- TOP_MUX(0x1, "DVI0"), /* hs */
- TOP_MUX(0x2, "BGPIO")), /* gpio2 */
- TOP_PIN(GMII_TXD1, TOP_REG0, 6, 2, 0x14, 0,
- TOP_MUX(0x0, "GMII"), /* txd1 */
- TOP_MUX(0x1, "DVI0"), /* d0 */
- TOP_MUX(0x2, "BGPIO")), /* gpio3 */
- TOP_PIN(GMII_TXD2, TOP_REG0, 8, 2, 0x14, 9,
- TOP_MUX(0x0, "GMII"), /* txd2 */
- TOP_MUX(0x1, "DVI0"), /* d1 */
- TOP_MUX(0x2, "BGPIO")), /* gpio4 */
- TOP_PIN(GMII_TXD3, TOP_REG0, 10, 2, 0x14, 18,
- TOP_MUX(0x0, "GMII"), /* txd3 */
- TOP_MUX(0x1, "DVI0"), /* d2 */
- TOP_MUX(0x2, "BGPIO")), /* gpio5 */
- TOP_PIN(GMII_TXD4, TOP_REG0, 12, 2, 0x18, 0,
- TOP_MUX(0x0, "GMII"), /* txd4 */
- TOP_MUX(0x1, "DVI0"), /* d3 */
- TOP_MUX(0x2, "BGPIO")), /* gpio6 */
- TOP_PIN(GMII_TXD5, TOP_REG0, 14, 2, 0x18, 9,
- TOP_MUX(0x0, "GMII"), /* txd5 */
- TOP_MUX(0x1, "DVI0"), /* d4 */
- TOP_MUX(0x2, "BGPIO")), /* gpio7 */
- TOP_PIN(GMII_TXD6, TOP_REG0, 16, 2, 0x18, 18,
- TOP_MUX(0x0, "GMII"), /* txd6 */
- TOP_MUX(0x1, "DVI0"), /* d5 */
- TOP_MUX(0x2, "BGPIO")), /* gpio8 */
- TOP_PIN(GMII_TXD7, TOP_REG0, 18, 2, 0x1c, 0,
- TOP_MUX(0x0, "GMII"), /* txd7 */
- TOP_MUX(0x1, "DVI0"), /* d6 */
- TOP_MUX(0x2, "BGPIO")), /* gpio9 */
- TOP_PIN(GMII_TX_ER, TOP_REG0, 20, 2, 0x1c, 9,
- TOP_MUX(0x0, "GMII"), /* tx_er */
- TOP_MUX(0x1, "DVI0"), /* d7 */
- TOP_MUX(0x2, "BGPIO")), /* gpio10 */
- TOP_PIN(GMII_TX_EN, TOP_REG0, 22, 2, 0x1c, 18,
- TOP_MUX(0x0, "GMII"), /* tx_en */
- TOP_MUX(0x1, "DVI0"), /* d8 */
- TOP_MUX(0x3, "BGPIO")), /* gpio11 */
- TOP_PIN(GMII_RX_CLK, TOP_REG0, 24, 2, 0x20, 0,
- TOP_MUX(0x0, "GMII"), /* rx_clk */
- TOP_MUX(0x1, "DVI0"), /* d9 */
- TOP_MUX(0x3, "BGPIO")), /* gpio12 */
- TOP_PIN(GMII_RXD0, TOP_REG0, 26, 2, 0x20, 9,
- TOP_MUX(0x0, "GMII"), /* rxd0 */
- TOP_MUX(0x1, "DVI0"), /* d10 */
- TOP_MUX(0x3, "BGPIO")), /* gpio13 */
- TOP_PIN(GMII_RXD1, TOP_REG0, 28, 2, 0x20, 18,
- TOP_MUX(0x0, "GMII"), /* rxd1 */
- TOP_MUX(0x1, "DVI0"), /* d11 */
- TOP_MUX(0x2, "BGPIO")), /* gpio14 */
- TOP_PIN(GMII_RXD2, TOP_REG0, 30, 2, 0x24, 0,
- TOP_MUX(0x0, "GMII"), /* rxd2 */
- TOP_MUX(0x1, "DVI1"), /* clk */
- TOP_MUX(0x2, "BGPIO")), /* gpio15 */
-
- /* top_pmm_reg_1 */
- TOP_PIN(GMII_RXD3, TOP_REG1, 0, 2, 0x24, 9,
- TOP_MUX(0x0, "GMII"), /* rxd3 */
- TOP_MUX(0x1, "DVI1"), /* hs */
- TOP_MUX(0x2, "BGPIO")), /* gpio16 */
- TOP_PIN(GMII_RXD4, TOP_REG1, 2, 2, 0x24, 18,
- TOP_MUX(0x0, "GMII"), /* rxd4 */
- TOP_MUX(0x1, "DVI1"), /* vs */
- TOP_MUX(0x2, "BGPIO")), /* gpio17 */
- TOP_PIN(GMII_RXD5, TOP_REG1, 4, 2, 0x28, 0,
- TOP_MUX(0x0, "GMII"), /* rxd5 */
- TOP_MUX(0x1, "DVI1"), /* d0 */
- TOP_MUX(0x2, "BGPIO"), /* gpio18 */
- TOP_MUX(0x3, "TSI0")), /* dat0 */
- TOP_PIN(GMII_RXD6, TOP_REG1, 6, 2, 0x28, 9,
- TOP_MUX(0x0, "GMII"), /* rxd6 */
- TOP_MUX(0x1, "DVI1"), /* d1 */
- TOP_MUX(0x2, "BGPIO"), /* gpio19 */
- TOP_MUX(0x3, "TSI0")), /* clk */
- TOP_PIN(GMII_RXD7, TOP_REG1, 8, 2, 0x28, 18,
- TOP_MUX(0x0, "GMII"), /* rxd7 */
- TOP_MUX(0x1, "DVI1"), /* d2 */
- TOP_MUX(0x2, "BGPIO"), /* gpio20 */
- TOP_MUX(0x3, "TSI0")), /* sync */
- TOP_PIN(GMII_RX_ER, TOP_REG1, 10, 2, 0x2c, 0,
- TOP_MUX(0x0, "GMII"), /* rx_er */
- TOP_MUX(0x1, "DVI1"), /* d3 */
- TOP_MUX(0x2, "BGPIO"), /* gpio21 */
- TOP_MUX(0x3, "TSI0")), /* valid */
- TOP_PIN(GMII_RX_DV, TOP_REG1, 12, 2, 0x2c, 9,
- TOP_MUX(0x0, "GMII"), /* rx_dv */
- TOP_MUX(0x1, "DVI1"), /* d4 */
- TOP_MUX(0x2, "BGPIO"), /* gpio22 */
- TOP_MUX(0x3, "TSI1")), /* dat0 */
- TOP_PIN(GMII_COL, TOP_REG1, 14, 2, 0x2c, 18,
- TOP_MUX(0x0, "GMII"), /* col */
- TOP_MUX(0x1, "DVI1"), /* d5 */
- TOP_MUX(0x2, "BGPIO"), /* gpio23 */
- TOP_MUX(0x3, "TSI1")), /* clk */
- TOP_PIN(GMII_CRS, TOP_REG1, 16, 2, 0x30, 0,
- TOP_MUX(0x0, "GMII"), /* crs */
- TOP_MUX(0x1, "DVI1"), /* d6 */
- TOP_MUX(0x2, "BGPIO"), /* gpio24 */
- TOP_MUX(0x3, "TSI1")), /* sync */
- TOP_PIN(GMII_MDC, TOP_REG1, 18, 2, 0x30, 9,
- TOP_MUX(0x0, "GMII"), /* mdc */
- TOP_MUX(0x1, "DVI1"), /* d7 */
- TOP_MUX(0x2, "BGPIO"), /* gpio25 */
- TOP_MUX(0x3, "TSI1")), /* valid */
- TOP_PIN(GMII_MDIO, TOP_REG1, 20, 1, 0x30, 18,
- TOP_MUX(0x0, "GMII"), /* mdio */
- TOP_MUX(0x2, "BGPIO")), /* gpio26 */
- TOP_PIN(SDIO1_CLK, TOP_REG1, 21, 2, 0x34, 18,
- TOP_MUX(0x0, "SDIO1"), /* clk */
- TOP_MUX(0x1, "USIM0"), /* clk */
- TOP_MUX(0x2, "BGPIO"), /* gpio27 */
- TOP_MUX(0x3, "SPINOR")), /* clk */
- TOP_PIN(SDIO1_CMD, TOP_REG1, 23, 2, 0x38, 0,
- TOP_MUX(0x0, "SDIO1"), /* cmd */
- TOP_MUX(0x1, "USIM0"), /* cd */
- TOP_MUX(0x2, "BGPIO"), /* gpio28 */
- TOP_MUX(0x3, "SPINOR")), /* cs */
- TOP_PIN(SDIO1_DATA0, TOP_REG1, 25, 2, 0x38, 9,
- TOP_MUX(0x0, "SDIO1"), /* dat0 */
- TOP_MUX(0x1, "USIM0"), /* rst */
- TOP_MUX(0x2, "BGPIO"), /* gpio29 */
- TOP_MUX(0x3, "SPINOR")), /* dq0 */
- TOP_PIN(SDIO1_DATA1, TOP_REG1, 27, 2, 0x38, 18,
- TOP_MUX(0x0, "SDIO1"), /* dat1 */
- TOP_MUX(0x1, "USIM0"), /* data */
- TOP_MUX(0x2, "BGPIO"), /* gpio30 */
- TOP_MUX(0x3, "SPINOR")), /* dq1 */
- TOP_PIN(SDIO1_DATA2, TOP_REG1, 29, 2, 0x3c, 0,
- TOP_MUX(0x0, "SDIO1"), /* dat2 */
- TOP_MUX(0x1, "BGPIO"), /* gpio31 */
- TOP_MUX(0x2, "SPINOR")), /* dq2 */
-
- /* top_pmm_reg_2 */
- TOP_PIN(SDIO1_DATA3, TOP_REG2, 0, 2, 0x3c, 9,
- TOP_MUX(0x0, "SDIO1"), /* dat3 */
- TOP_MUX(0x1, "BGPIO"), /* gpio32 */
- TOP_MUX(0x2, "SPINOR")), /* dq3 */
- TOP_PIN(SDIO1_CD, TOP_REG2, 2, 2, 0x3c, 18,
- TOP_MUX(0x0, "SDIO1"), /* cd */
- TOP_MUX(0x1, "BGPIO"), /* gpio33 */
- TOP_MUX(0x2, "ISP")), /* fl_trig */
- TOP_PIN(SDIO1_WP, TOP_REG2, 4, 2, 0x40, 0,
- TOP_MUX(0x0, "SDIO1"), /* wp */
- TOP_MUX(0x1, "BGPIO"), /* gpio34 */
- TOP_MUX(0x2, "ISP")), /* ref_clk */
- TOP_PIN(USIM1_CD, TOP_REG2, 22, 3, 0x44, 18,
- TOP_MUX(0x0, "USIM1"), /* cd */
- TOP_MUX(0x1, "UART4"), /* rxd */
- TOP_MUX(0x2, "BGPIO"), /* gpio39 */
- TOP_MUX(0x3, "SPI3"), /* clk */
- TOP_MUX(0x4, "I2S0"), /* bclk */
- TOP_MUX(0x5, "B_DVI0")), /* d8 */
- TOP_PIN(USIM1_CLK, TOP_REG2, 25, 3, 0x4c, 18,
- TOP_MUX(0x0, "USIM1"), /* clk */
- TOP_MUX(0x1, "UART4"), /* txd */
- TOP_MUX(0x2, "BGPIO"), /* gpio40 */
- TOP_MUX(0x3, "SPI3"), /* cs */
- TOP_MUX(0x4, "I2S0"), /* ws */
- TOP_MUX(0x5, "B_DVI0")), /* d9 */
- TOP_PIN(USIM1_RST, TOP_REG2, 28, 3, 0x4c, 0,
- TOP_MUX(0x0, "USIM1"), /* rst */
- TOP_MUX(0x1, "UART4"), /* cts */
- TOP_MUX(0x2, "BGPIO"), /* gpio41 */
- TOP_MUX(0x3, "SPI3"), /* txd */
- TOP_MUX(0x4, "I2S0"), /* dout0 */
- TOP_MUX(0x5, "B_DVI0")), /* d10 */
-
- /* top_pmm_reg_3 */
- TOP_PIN(USIM1_DATA, TOP_REG3, 0, 3, 0x4c, 9,
- TOP_MUX(0x0, "USIM1"), /* dat */
- TOP_MUX(0x1, "UART4"), /* rst */
- TOP_MUX(0x2, "BGPIO"), /* gpio42 */
- TOP_MUX(0x3, "SPI3"), /* rxd */
- TOP_MUX(0x4, "I2S0"), /* din0 */
- TOP_MUX(0x5, "B_DVI0")), /* d11 */
- TOP_PIN(SDIO0_CLK, TOP_REG3, 6, 1, 0x58, 0,
- TOP_MUX(0x0, "SDIO0"), /* clk */
- TOP_MUX(0x1, "GPIO")), /* gpio43 */
- TOP_PIN(SDIO0_CMD, TOP_REG3, 7, 1, 0x58, 9,
- TOP_MUX(0x0, "SDIO0"), /* cmd */
- TOP_MUX(0x1, "GPIO")), /* gpio44 */
- TOP_PIN(SDIO0_DATA0, TOP_REG3, 8, 1, 0x58, 18,
- TOP_MUX(0x0, "SDIO0"), /* dat0 */
- TOP_MUX(0x1, "GPIO")), /* gpio45 */
- TOP_PIN(SDIO0_DATA1, TOP_REG3, 9, 1, 0x5c, 0,
- TOP_MUX(0x0, "SDIO0"), /* dat1 */
- TOP_MUX(0x1, "GPIO")), /* gpio46 */
- TOP_PIN(SDIO0_DATA2, TOP_REG3, 10, 1, 0x5c, 9,
- TOP_MUX(0x0, "SDIO0"), /* dat2 */
- TOP_MUX(0x1, "GPIO")), /* gpio47 */
- TOP_PIN(SDIO0_DATA3, TOP_REG3, 11, 1, 0x5c, 18,
- TOP_MUX(0x0, "SDIO0"), /* dat3 */
- TOP_MUX(0x1, "GPIO")), /* gpio48 */
- TOP_PIN(SDIO0_CD, TOP_REG3, 12, 1, 0x60, 0,
- TOP_MUX(0x0, "SDIO0"), /* cd */
- TOP_MUX(0x1, "GPIO")), /* gpio49 */
- TOP_PIN(SDIO0_WP, TOP_REG3, 13, 1, 0x60, 9,
- TOP_MUX(0x0, "SDIO0"), /* wp */
- TOP_MUX(0x1, "GPIO")), /* gpio50 */
-
- /* top_pmm_reg_4 */
- TOP_PIN(TSI0_DATA0, TOP_REG4, 0, 2, 0x60, 18,
- TOP_MUX(0x0, "TSI0"), /* dat0 */
- TOP_MUX(0x1, "LCD"), /* clk */
- TOP_MUX(0x2, "BGPIO")), /* gpio51 */
- TOP_PIN(SPINOR_CLK, TOP_REG4, 2, 2, 0xa8, 18,
- TOP_MUX(0x0, "SPINOR"), /* clk */
- TOP_MUX(0x1, "TSI0"), /* dat1 */
- TOP_MUX(0x2, "LCD"), /* dat0 */
- TOP_MUX(0x3, "BGPIO")), /* gpio52 */
- TOP_PIN(TSI2_DATA, TOP_REG4, 4, 2, 0x7c, 0,
- TOP_MUX(0x0, "TSI2"), /* dat */
- TOP_MUX(0x1, "TSI0"), /* dat2 */
- TOP_MUX(0x2, "LCD"), /* dat1 */
- TOP_MUX(0x3, "BGPIO")), /* gpio53 */
- TOP_PIN(TSI2_CLK, TOP_REG4, 6, 2, 0x7c, 9,
- TOP_MUX(0x0, "TSI2"), /* clk */
- TOP_MUX(0x1, "TSI0"), /* dat3 */
- TOP_MUX(0x2, "LCD"), /* dat2 */
- TOP_MUX(0x3, "BGPIO")), /* gpio54 */
- TOP_PIN(TSI2_SYNC, TOP_REG4, 8, 2, 0x7c, 18,
- TOP_MUX(0x0, "TSI2"), /* sync */
- TOP_MUX(0x1, "TSI0"), /* dat4 */
- TOP_MUX(0x2, "LCD"), /* dat3 */
- TOP_MUX(0x3, "BGPIO")), /* gpio55 */
- TOP_PIN(TSI2_VALID, TOP_REG4, 10, 2, 0x80, 0,
- TOP_MUX(0x0, "TSI2"), /* valid */
- TOP_MUX(0x1, "TSI0"), /* dat5 */
- TOP_MUX(0x2, "LCD"), /* dat4 */
- TOP_MUX(0x3, "BGPIO")), /* gpio56 */
- TOP_PIN(SPINOR_CS, TOP_REG4, 12, 2, 0x80, 9,
- TOP_MUX(0x0, "SPINOR"), /* cs */
- TOP_MUX(0x1, "TSI0"), /* dat6 */
- TOP_MUX(0x2, "LCD"), /* dat5 */
- TOP_MUX(0x3, "BGPIO")), /* gpio57 */
- TOP_PIN(SPINOR_DQ0, TOP_REG4, 14, 2, 0x80, 18,
- TOP_MUX(0x0, "SPINOR"), /* dq0 */
- TOP_MUX(0x1, "TSI0"), /* dat7 */
- TOP_MUX(0x2, "LCD"), /* dat6 */
- TOP_MUX(0x3, "BGPIO")), /* gpio58 */
- TOP_PIN(SPINOR_DQ1, TOP_REG4, 16, 2, 0x84, 0,
- TOP_MUX(0x0, "SPINOR"), /* dq1 */
- TOP_MUX(0x1, "TSI0"), /* clk */
- TOP_MUX(0x2, "LCD"), /* dat7 */
- TOP_MUX(0x3, "BGPIO")), /* gpio59 */
- TOP_PIN(SPINOR_DQ2, TOP_REG4, 18, 2, 0x84, 9,
- TOP_MUX(0x0, "SPINOR"), /* dq2 */
- TOP_MUX(0x1, "TSI0"), /* sync */
- TOP_MUX(0x2, "LCD"), /* dat8 */
- TOP_MUX(0x3, "BGPIO")), /* gpio60 */
- TOP_PIN(SPINOR_DQ3, TOP_REG4, 20, 2, 0x84, 18,
- TOP_MUX(0x0, "SPINOR"), /* dq3 */
- TOP_MUX(0x1, "TSI0"), /* valid */
- TOP_MUX(0x2, "LCD"), /* dat9 */
- TOP_MUX(0x3, "BGPIO")), /* gpio61 */
- TOP_PIN(VGA_HS, TOP_REG4, 22, 3, 0x88, 0,
- TOP_MUX(0x0, "VGA"), /* hs */
- TOP_MUX(0x1, "TSI1"), /* dat0 */
- TOP_MUX(0x2, "LCD"), /* dat10 */
- TOP_MUX(0x3, "BGPIO"), /* gpio62 */
- TOP_MUX(0x4, "I2S1"), /* din1 */
- TOP_MUX(0x5, "B_DVI0")), /* clk */
- TOP_PIN(VGA_VS, TOP_REG4, 25, 3, 0x88, 9,
- TOP_MUX(0x0, "VGA"), /* vs0 */
- TOP_MUX(0x1, "TSI1"), /* dat1 */
- TOP_MUX(0x2, "LCD"), /* dat11 */
- TOP_MUX(0x3, "BGPIO"), /* gpio63 */
- TOP_MUX(0x4, "I2S1"), /* din2 */
- TOP_MUX(0x5, "B_DVI0")), /* vs */
- TOP_PIN(TSI3_DATA, TOP_REG4, 28, 3, 0x88, 18,
- TOP_MUX(0x0, "TSI3"), /* dat */
- TOP_MUX(0x1, "TSI1"), /* dat2 */
- TOP_MUX(0x2, "LCD"), /* dat12 */
- TOP_MUX(0x3, "BGPIO"), /* gpio64 */
- TOP_MUX(0x4, "I2S1"), /* din3 */
- TOP_MUX(0x5, "B_DVI0")), /* hs */
-
- /* top_pmm_reg_5 */
- TOP_PIN(TSI3_CLK, TOP_REG5, 0, 3, 0x8c, 0,
- TOP_MUX(0x0, "TSI3"), /* clk */
- TOP_MUX(0x1, "TSI1"), /* dat3 */
- TOP_MUX(0x2, "LCD"), /* dat13 */
- TOP_MUX(0x3, "BGPIO"), /* gpio65 */
- TOP_MUX(0x4, "I2S1"), /* dout1 */
- TOP_MUX(0x5, "B_DVI0")), /* d0 */
- TOP_PIN(TSI3_SYNC, TOP_REG5, 3, 3, 0x8c, 9,
- TOP_MUX(0x0, "TSI3"), /* sync */
- TOP_MUX(0x1, "TSI1"), /* dat4 */
- TOP_MUX(0x2, "LCD"), /* dat14 */
- TOP_MUX(0x3, "BGPIO"), /* gpio66 */
- TOP_MUX(0x4, "I2S1"), /* dout2 */
- TOP_MUX(0x5, "B_DVI0")), /* d1 */
- TOP_PIN(TSI3_VALID, TOP_REG5, 6, 3, 0x8c, 18,
- TOP_MUX(0x0, "TSI3"), /* valid */
- TOP_MUX(0x1, "TSI1"), /* dat5 */
- TOP_MUX(0x2, "LCD"), /* dat15 */
- TOP_MUX(0x3, "BGPIO"), /* gpio67 */
- TOP_MUX(0x4, "I2S1"), /* dout3 */
- TOP_MUX(0x5, "B_DVI0")), /* d2 */
- TOP_PIN(I2S1_WS, TOP_REG5, 9, 3, 0x90, 0,
- TOP_MUX(0x0, "I2S1"), /* ws */
- TOP_MUX(0x1, "TSI1"), /* dat6 */
- TOP_MUX(0x2, "LCD"), /* dat16 */
- TOP_MUX(0x3, "BGPIO"), /* gpio68 */
- TOP_MUX(0x4, "VGA"), /* scl */
- TOP_MUX(0x5, "B_DVI0")), /* d3 */
- TOP_PIN(I2S1_BCLK, TOP_REG5, 12, 3, 0x90, 9,
- TOP_MUX(0x0, "I2S1"), /* bclk */
- TOP_MUX(0x1, "TSI1"), /* dat7 */
- TOP_MUX(0x2, "LCD"), /* dat17 */
- TOP_MUX(0x3, "BGPIO"), /* gpio69 */
- TOP_MUX(0x4, "VGA"), /* sda */
- TOP_MUX(0x5, "B_DVI0")), /* d4 */
- TOP_PIN(I2S1_MCLK, TOP_REG5, 15, 2, 0x90, 18,
- TOP_MUX(0x0, "I2S1"), /* mclk */
- TOP_MUX(0x1, "TSI1"), /* clk */
- TOP_MUX(0x2, "LCD"), /* dat18 */
- TOP_MUX(0x3, "BGPIO")), /* gpio70 */
- TOP_PIN(I2S1_DIN0, TOP_REG5, 17, 2, 0x94, 0,
- TOP_MUX(0x0, "I2S1"), /* din0 */
- TOP_MUX(0x1, "TSI1"), /* sync */
- TOP_MUX(0x2, "LCD"), /* dat19 */
- TOP_MUX(0x3, "BGPIO")), /* gpio71 */
- TOP_PIN(I2S1_DOUT0, TOP_REG5, 19, 2, 0x94, 9,
- TOP_MUX(0x0, "I2S1"), /* dout0 */
- TOP_MUX(0x1, "TSI1"), /* valid */
- TOP_MUX(0x2, "LCD"), /* dat20 */
- TOP_MUX(0x3, "BGPIO")), /* gpio72 */
- TOP_PIN(SPI3_CLK, TOP_REG5, 21, 3, 0x94, 18,
- TOP_MUX(0x0, "SPI3"), /* clk */
- TOP_MUX(0x1, "TSO1"), /* clk */
- TOP_MUX(0x2, "LCD"), /* dat21 */
- TOP_MUX(0x3, "BGPIO"), /* gpio73 */
- TOP_MUX(0x4, "UART5"), /* rxd */
- TOP_MUX(0x5, "PCM"), /* fs */
- TOP_MUX(0x6, "I2S0"), /* din1 */
- TOP_MUX(0x7, "B_DVI0")), /* d5 */
- TOP_PIN(SPI3_CS, TOP_REG5, 24, 3, 0x98, 0,
- TOP_MUX(0x0, "SPI3"), /* cs */
- TOP_MUX(0x1, "TSO1"), /* dat0 */
- TOP_MUX(0x2, "LCD"), /* dat22 */
- TOP_MUX(0x3, "BGPIO"), /* gpio74 */
- TOP_MUX(0x4, "UART5"), /* txd */
- TOP_MUX(0x5, "PCM"), /* clk */
- TOP_MUX(0x6, "I2S0"), /* din2 */
- TOP_MUX(0x7, "B_DVI0")), /* d6 */
- TOP_PIN(SPI3_TXD, TOP_REG5, 27, 3, 0x98, 9,
- TOP_MUX(0x0, "SPI3"), /* txd */
- TOP_MUX(0x1, "TSO1"), /* dat1 */
- TOP_MUX(0x2, "LCD"), /* dat23 */
- TOP_MUX(0x3, "BGPIO"), /* gpio75 */
- TOP_MUX(0x4, "UART5"), /* cts */
- TOP_MUX(0x5, "PCM"), /* txd */
- TOP_MUX(0x6, "I2S0"), /* din3 */
- TOP_MUX(0x7, "B_DVI0")), /* d7 */
- TOP_PIN(NAND_LDO_MS18_SEL, TOP_REG5, 30, 1, 0xe4, 0,
- TOP_MUX(0x0, "NAND"), /* ldo_ms18_sel */
- TOP_MUX(0x1, "BGPIO")), /* gpio99 */
-
- /* top_pmm_reg_6 */
- TOP_PIN(SPI3_RXD, TOP_REG6, 0, 3, 0x98, 18,
- TOP_MUX(0x0, "SPI3"), /* rxd */
- TOP_MUX(0x1, "TSO1"), /* dat2 */
- TOP_MUX(0x2, "LCD"), /* stvu_vsync */
- TOP_MUX(0x3, "BGPIO"), /* gpio76 */
- TOP_MUX(0x4, "UART5"), /* rts */
- TOP_MUX(0x5, "PCM"), /* rxd */
- TOP_MUX(0x6, "I2S0"), /* dout1 */
- TOP_MUX(0x7, "B_DVI1")), /* clk */
- TOP_PIN(I2S0_MCLK, TOP_REG6, 3, 3, 0x9c, 0,
- TOP_MUX(0x0, "I2S0"), /* mclk */
- TOP_MUX(0x1, "TSO1"), /* dat3 */
- TOP_MUX(0x2, "LCD"), /* stvd */
- TOP_MUX(0x3, "BGPIO"), /* gpio77 */
- TOP_MUX(0x4, "USIM0"), /* cd */
- TOP_MUX(0x5, "B_DVI1")), /* vs */
- TOP_PIN(I2S0_BCLK, TOP_REG6, 6, 3, 0x9c, 9,
- TOP_MUX(0x0, "I2S0"), /* bclk */
- TOP_MUX(0x1, "TSO1"), /* dat4 */
- TOP_MUX(0x2, "LCD"), /* sthl_hsync */
- TOP_MUX(0x3, "BGPIO"), /* gpio78 */
- TOP_MUX(0x4, "USIM0"), /* clk */
- TOP_MUX(0x5, "B_DVI1")), /* hs */
- TOP_PIN(I2S0_WS, TOP_REG6, 9, 3, 0x9c, 18,
- TOP_MUX(0x0, "I2S0"), /* ws */
- TOP_MUX(0x1, "TSO1"), /* dat5 */
- TOP_MUX(0x2, "LCD"), /* sthr */
- TOP_MUX(0x3, "BGPIO"), /* gpio79 */
- TOP_MUX(0x4, "USIM0"), /* rst */
- TOP_MUX(0x5, "B_DVI1")), /* d0 */
- TOP_PIN(I2S0_DIN0, TOP_REG6, 12, 3, 0xa0, 0,
- TOP_MUX(0x0, "I2S0"), /* din0 */
- TOP_MUX(0x1, "TSO1"), /* dat6 */
- TOP_MUX(0x2, "LCD"), /* oev_dataen */
- TOP_MUX(0x3, "BGPIO"), /* gpio80 */
- TOP_MUX(0x4, "USIM0"), /* dat */
- TOP_MUX(0x5, "B_DVI1")), /* d1 */
- TOP_PIN(I2S0_DOUT0, TOP_REG6, 15, 2, 0xa0, 9,
- TOP_MUX(0x0, "I2S0"), /* dout0 */
- TOP_MUX(0x1, "TSO1"), /* dat7 */
- TOP_MUX(0x2, "LCD"), /* ckv */
- TOP_MUX(0x3, "BGPIO")), /* gpio81 */
- TOP_PIN(I2C5_SCL, TOP_REG6, 17, 3, 0xa0, 18,
- TOP_MUX(0x0, "I2C5"), /* scl */
- TOP_MUX(0x1, "TSO1"), /* sync */
- TOP_MUX(0x2, "LCD"), /* ld */
- TOP_MUX(0x3, "BGPIO"), /* gpio82 */
- TOP_MUX(0x4, "PWM"), /* out2 */
- TOP_MUX(0x5, "I2S0"), /* dout2 */
- TOP_MUX(0x6, "B_DVI1")), /* d2 */
- TOP_PIN(I2C5_SDA, TOP_REG6, 20, 3, 0xa4, 0,
- TOP_MUX(0x0, "I2C5"), /* sda */
- TOP_MUX(0x1, "TSO1"), /* vld */
- TOP_MUX(0x2, "LCD"), /* pol */
- TOP_MUX(0x3, "BGPIO"), /* gpio83 */
- TOP_MUX(0x4, "PWM"), /* out3 */
- TOP_MUX(0x5, "I2S0"), /* dout3 */
- TOP_MUX(0x6, "B_DVI1")), /* d3 */
- TOP_PIN(SPI2_CLK, TOP_REG6, 23, 3, 0xa4, 9,
- TOP_MUX(0x0, "SPI2"), /* clk */
- TOP_MUX(0x1, "TSO0"), /* clk */
- TOP_MUX(0x2, "LCD"), /* degsl */
- TOP_MUX(0x3, "BGPIO"), /* gpio84 */
- TOP_MUX(0x4, "I2C4"), /* scl */
- TOP_MUX(0x5, "B_DVI1")), /* d4 */
- TOP_PIN(SPI2_CS, TOP_REG6, 26, 3, 0xa4, 18,
- TOP_MUX(0x0, "SPI2"), /* cs */
- TOP_MUX(0x1, "TSO0"), /* data */
- TOP_MUX(0x2, "LCD"), /* rev */
- TOP_MUX(0x3, "BGPIO"), /* gpio85 */
- TOP_MUX(0x4, "I2C4"), /* sda */
- TOP_MUX(0x5, "B_DVI1")), /* d5 */
- TOP_PIN(SPI2_TXD, TOP_REG6, 29, 3, 0xa8, 0,
- TOP_MUX(0x0, "SPI2"), /* txd */
- TOP_MUX(0x1, "TSO0"), /* sync */
- TOP_MUX(0x2, "LCD"), /* u_d */
- TOP_MUX(0x3, "BGPIO"), /* gpio86 */
- TOP_MUX(0x4, "I2C4"), /* scl */
- TOP_MUX(0x5, "B_DVI1")), /* d6 */
-
- /* top_pmm_reg_7 */
- TOP_PIN(SPI2_RXD, TOP_REG7, 0, 3, 0xa8, 9,
- TOP_MUX(0x0, "SPI2"), /* rxd */
- TOP_MUX(0x1, "TSO0"), /* vld */
- TOP_MUX(0x2, "LCD"), /* r_l */
- TOP_MUX(0x3, "BGPIO"), /* gpio87 */
- TOP_MUX(0x4, "I2C3"), /* sda */
- TOP_MUX(0x5, "B_DVI1")), /* d7 */
- TOP_PIN(NAND_WP_N, TOP_REG7, 7, 3, 0x54, 9,
- TOP_MUX(0x0, "NAND"), /* wp */
- TOP_MUX(0x1, "PWM"), /* out2 */
- TOP_MUX(0x2, "SPI2"), /* clk */
- TOP_MUX(0x3, "BGPIO"), /* gpio88 */
- TOP_MUX(0x4, "TSI0"), /* dat0 */
- TOP_MUX(0x5, "I2S1")), /* din1 */
- TOP_PIN(NAND_PAGE_SIZE0, TOP_REG7, 10, 3, 0xb8, 0,
- TOP_MUX(0x0, "NAND"), /* boot_pagesize0 */
- TOP_MUX(0x1, "PWM"), /* out3 */
- TOP_MUX(0x2, "SPI2"), /* cs */
- TOP_MUX(0x3, "BGPIO"), /* gpio89 */
- TOP_MUX(0x4, "TSI0"), /* clk */
- TOP_MUX(0x5, "I2S1")), /* din2 */
- TOP_PIN(NAND_PAGE_SIZE1, TOP_REG7, 13, 3, 0xb8, 9,
- TOP_MUX(0x0, "NAND"), /* boot_pagesize1 */
- TOP_MUX(0x1, "I2C4"), /* scl */
- TOP_MUX(0x2, "SPI2"), /* txd */
- TOP_MUX(0x3, "BGPIO"), /* gpio90 */
- TOP_MUX(0x4, "TSI0"), /* sync */
- TOP_MUX(0x5, "I2S1")), /* din3 */
- TOP_PIN(NAND_ADDR_CYCLE, TOP_REG7, 16, 3, 0xb8, 18,
- TOP_MUX(0x0, "NAND"), /* boot_addr_cycles */
- TOP_MUX(0x1, "I2C4"), /* sda */
- TOP_MUX(0x2, "SPI2"), /* rxd */
- TOP_MUX(0x3, "BGPIO"), /* gpio91 */
- TOP_MUX(0x4, "TSI0"), /* valid */
- TOP_MUX(0x5, "I2S1")), /* dout1 */
- TOP_PIN(NAND_RB0, TOP_REG7, 19, 3, 0xbc, 0,
- TOP_MUX(0x0, "NAND"), /* rdy_busy0 */
- TOP_MUX(0x1, "I2C2"), /* scl */
- TOP_MUX(0x2, "USIM0"), /* cd */
- TOP_MUX(0x3, "BGPIO"), /* gpio92 */
- TOP_MUX(0x4, "TSI1")), /* data0 */
- TOP_PIN(NAND_RB1, TOP_REG7, 22, 3, 0xbc, 9,
- TOP_MUX(0x0, "NAND"), /* rdy_busy1 */
- TOP_MUX(0x1, "I2C2"), /* sda */
- TOP_MUX(0x2, "USIM0"), /* clk */
- TOP_MUX(0x3, "BGPIO"), /* gpio93 */
- TOP_MUX(0x4, "TSI1")), /* clk */
- TOP_PIN(NAND_RB2, TOP_REG7, 25, 3, 0xbc, 18,
- TOP_MUX(0x0, "NAND"), /* rdy_busy2 */
- TOP_MUX(0x1, "UART5"), /* rxd */
- TOP_MUX(0x2, "USIM0"), /* rst */
- TOP_MUX(0x3, "BGPIO"), /* gpio94 */
- TOP_MUX(0x4, "TSI1"), /* sync */
- TOP_MUX(0x4, "I2S1")), /* dout2 */
- TOP_PIN(NAND_RB3, TOP_REG7, 28, 3, 0x54, 18,
- TOP_MUX(0x0, "NAND"), /* rdy_busy3 */
- TOP_MUX(0x1, "UART5"), /* txd */
- TOP_MUX(0x2, "USIM0"), /* dat */
- TOP_MUX(0x3, "BGPIO"), /* gpio95 */
- TOP_MUX(0x4, "TSI1"), /* valid */
- TOP_MUX(0x4, "I2S1")), /* dout3 */
-
- /* top_pmm_reg_8 */
- TOP_PIN(GMAC_125M_IN, TOP_REG8, 0, 2, 0x34, 0,
- TOP_MUX(0x0, "GMII"), /* 125m_in */
- TOP_MUX(0x1, "USB2"), /* 0_drvvbus */
- TOP_MUX(0x2, "ISP"), /* ref_clk */
- TOP_MUX(0x3, "BGPIO")), /* gpio96 */
- TOP_PIN(GMAC_50M_OUT, TOP_REG8, 2, 2, 0x34, 9,
- TOP_MUX(0x0, "GMII"), /* 50m_out */
- TOP_MUX(0x1, "USB2"), /* 1_drvvbus */
- TOP_MUX(0x2, "BGPIO"), /* gpio97 */
- TOP_MUX(0x3, "USB2")), /* 0_drvvbus */
- TOP_PIN(SPINOR_SSCLK_LOOPBACK, TOP_REG8, 6, 1, 0xc8, 9,
- TOP_MUX(0x0, "SPINOR")), /* sdio1_clk_i */
- TOP_PIN(SPINOR_SDIO1CLK_LOOPBACK, TOP_REG8, 7, 1, 0xc8, 18,
- TOP_MUX(0x0, "SPINOR")), /* ssclk_i */
-};
-
-static struct zx_pinctrl_soc_info zx296718_pinctrl_info = {
- .pins = zx296718_pins,
- .npins = ARRAY_SIZE(zx296718_pins),
-};
-
-static int zx296718_pinctrl_probe(struct platform_device *pdev)
-{
- return zx_pinctrl_init(pdev, &zx296718_pinctrl_info);
-}
-
-static const struct of_device_id zx296718_pinctrl_match[] = {
- { .compatible = "zte,zx296718-pmm", },
- {}
-};
-MODULE_DEVICE_TABLE(of, zx296718_pinctrl_match);
-
-static struct platform_driver zx296718_pinctrl_driver = {
- .probe = zx296718_pinctrl_probe,
- .driver = {
- .name = "zx296718-pinctrl",
- .of_match_table = zx296718_pinctrl_match,
- },
-};
-builtin_platform_driver(zx296718_pinctrl_driver);
-
-MODULE_DESCRIPTION("ZTE ZX296718 pinctrl driver");
-MODULE_LICENSE("GPL");
--
2.29.2
[PATCH 2/5] pinctrl: remove zte zx driver
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [PATCH 2/5] pinctrl: remove zte zx driver
- From: Arnd Bergmann <arnd@xxxxxxxxxx>
- Date: Wed, 20 Jan 2021 14:20:42 +0100
- In-reply-to: <20210120132045.2127659-1-arnd@kernel.org>
- References: <20210120132045.2127659-1-arnd@kernel.org>
- Follow-Ups:
- Re: [PATCH 2/5] pinctrl: remove zte zx driver
- From: Linus Walleij
- Re: [PATCH 2/5] pinctrl: remove zte zx driver
- References:
- [PATCH 0/5] pinctrl/gpio: remove obsolete drivers
- From: Arnd Bergmann
- [PATCH 0/5] pinctrl/gpio: remove obsolete drivers
- Prev by Date: [PATCH 1/5] gpio: remove zte zx driver
- Next by Date: [PATCH 5/5] pinctrl: remove ste u300 driver
- Previous by thread: Re: [PATCH 1/5] gpio: remove zte zx driver
- Next by thread: Re: [PATCH 2/5] pinctrl: remove zte zx driver
- Index(es):
 |