Re: [PATCH 06/15] dt_bindings: regulator: Add ROHM BD71815 PMIC regulators

[Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>]

On Mon, 2021-01-11 at 13:09 -0600, Rob Herring wrote:
> On Fri, Jan 08, 2021 at 03:36:38PM +0200, Matti Vaittinen wrote:
> > Add binding documentation for regulators on ROHM BD71815 PMIC.
> > 5 bucks, 7 LDOs and a boost for LED.
> > 
> > Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
> > ---
> >  .../regulator/rohm,bd71815-regulator.yaml     | 104
> > ++++++++++++++++++
> >  1 file changed, 104 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/regulator/rohm,bd71815-
> > regulator.yaml
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/regulator/rohm,bd71815-
> > regulator.yaml
> > b/Documentation/devicetree/bindings/regulator/rohm,bd71815-
> > regulator.yaml
> > new file mode 100644
> > index 000000000000..2aa21603698c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-
> > regulator.yaml
> > @@ -0,0 +1,104 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: 
> > http://devicetree.org/schemas/regulator/rohm,bd71815-regulator.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: ROHM BD71815 Power Management Integrated Circuit regulators
> > +
> > +maintainers:
> > +  - Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
> > +
> > +description: |
> > +  This module is part of the ROHM BD718215 MFD device. For more
> > details
> > +  see Documentation/devicetree/bindings/mfd/rohm,bd71815-
> > pmic.yaml.
> > +
> > +  The regulator controller is represented as a sub-node of the
> > PMIC node
> > +  on the device tree.
> > +
> > +  The valid names for BD71815 regulator nodes are
> > +  buck1, buck2, buck3, buck4, buck5,
> > +  ldo1, ldo2, ldo3, ldo4, ldo5,
> > +  ldodvref, ldolpsr, wled
> 
> No schema for the last 3?

Thanks Rob. I'm unsure what I have been thinking of :( I'll fix this
for next version.

> 
> > +
> > +patternProperties:
> > +  "^(ldo|buck)[1-5]$":
> > +    type: object
> > +    description:
> > +      Properties for single LDO/BUCK regulator.
> > +    $ref: regulator.yaml#
> > +
> > +    properties:
> > +      regulator-name:
> > +        pattern: "^(ldo|buck)[1-5]$"
> > +        description:
> > +          should be "ldo1", ..., "ldo5" and "buck1", ..., "buck5"
> > +
> > +      rohm,vsel-gpios:
> > +        description:
> > +          GPIO used to control ldo4 state (when ldo4 is controlled
> > by GPIO).
> > +
> > +      rohm,dvs-run-voltage:
> 
> These should have a unit suffix.

I know but these are existing properties. I'd like to re-use them as
they have exported parser helpers - and I am unsure what kind of
breakages changing them would cause. (The BD71837/BD71847 which
introduced these properties are one of the PMICs which are pretty
widely used.)

Best Regards
	Matti Vaittinen