[RFC 0/3] add available pwm for bananapi-r64

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>

- mt7622 provides 6 pwm channels and only one is configured in dts
- pinctl-driver contains 7 pwm-channels where one is currently used.
- Mediatek confirmed that pwm7 does not exist and so dts is wrong
  and also the pinctrl definitions.

Frank Wunderlich (3):
  dts64: mt7622: enable all pwm for bananapi r64
  dts64: mt7622: disable spi1 and uart2 because pins are used by pwm
  pinctl: mt7622: drop pwm ch7 as mt7622 only has 6 channels

 .../boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts   | 13 ++++++++-----
 drivers/pinctrl/mediatek/pinctrl-mt7622.c           | 13 +------------
 2 files changed, 9 insertions(+), 17 deletions(-)

-- 
2.25.1




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux