Re: [RFC PATCH 2/3] dt-bindings: gpio: Add binding documentation for Etron EJ168/EJ188/EJ198

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 7, 2020 at 9:58 PM Martin Blumenstingl
<martin.blumenstingl@xxxxxxxxxxxxxx> wrote:
> On Wed, Oct 7, 2020 at 11:19 AM Linus Walleij <linus.walleij@xxxxxxxxxx> wrote:
> > On Sun, Oct 4, 2020 at 8:00 PM Martin Blumenstingl
> > <martin.blumenstingl@xxxxxxxxxxxxxx> wrote:
> >
> > > +properties:
> > > +  compatible:
> > > +    enum:
> > > +      - pci1b6f,7023
> > > +      - pci1b6f,7052
> >
> > I think it is better to let the PCI driver for the whole hardware in
> > drivers/usb/host/xhci-pci.c probe from the PCI configuration space
> > numbers, and then add a gpio_chip to xhci-pci.c.
>
> to have everything consistent I will move the binding to
> Documentation/devicetree/bindings/usb

I do not understand why a PCI device would need a DT binding
at all. They just probe from the magic number in the PCI
config space, they spawn struct pci_dev PCI devices, not the
type of platform devices coming out of the DT parser code.
No DT compatible needed.

What am I not understanding about this?

Yours,
Linus Walleij



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux