Re: [PATCH] ARM: dts: document pinctrl-single,pins when #pinctrl-cells = 2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 23, 2020 at 10:43 PM Tony Lindgren <tony@xxxxxxxxxxx> wrote:
>
> * Trent Piepho <tpiepho@xxxxxxxxx> [200924 01:34]:
> > On Tue, Sep 22, 2020 at 11:57 PM Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> > >
> > > Also FYI, folks have also complained for a long time that the pinctrl-single
> > > binding mixes mux and conf values while they should be handled separately.
> > >
> >
> > Instead of combining two fields when the dts is generated they are now
> > combined when the pinctrl-single driver reads the dts.  Other than
> > this detail, the result is the same.  The board dts source is the
> > same.  The value programmed into the pinctrl register is the same.
> > There is no mechanism currently that can alter that value in any way.
> >
> > What does combining them later allow that is not possible now?
>
> It now allows further driver changes to manage conf and mux separately :)

The pinctrl-single driver?  How will that work with boards that are
not am335x and don't use conf and mux fields in the same manner as
am335x?



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux