The convention for node names is to use hyphens, not underscores. dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix. Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> --- .../boot/dts/renesas/r8a77951-salvator-xs.dts | 2 +- .../boot/dts/renesas/r8a77965-salvator-xs.dts | 2 +- arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 14 +++++++------- 3 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts index cef9da4376a3..e5922329a4b8 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts @@ -118,7 +118,7 @@ }; &pca9654 { - pcie_sata_switch { + pcie-sata-switch-hog { gpio-hog; gpios = <7 GPIO_ACTIVE_HIGH>; output-low; /* enable SATA by default */ diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts index 5cef64605464..d7e621101af7 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts @@ -55,7 +55,7 @@ }; &pca9654 { - pcie_sata_switch { + pcie-sata-switch-hog { gpio-hog; gpios = <7 GPIO_ACTIVE_HIGH>; output-low; /* enable SATA by default */ diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 202177706cde..e9ed2597f1c2 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -143,49 +143,49 @@ interrupt-parent = <&gpio6>; interrupts = <8 IRQ_TYPE_EDGE_FALLING>; - audio_out_off { + audio-out-off-hog { gpio-hog; gpios = <0 GPIO_ACTIVE_HIGH>; /* P00 */ output-high; line-name = "Audio_Out_OFF"; }; - hub_pwen { + hub-pwen-hog { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; output-high; line-name = "HUB pwen"; }; - hub_rst { + hub-rst-hog { gpio-hog; gpios = <7 GPIO_ACTIVE_HIGH>; output-high; line-name = "HUB rst"; }; - otg_extlpn { + otg-extlpn-hog { gpio-hog; gpios = <9 GPIO_ACTIVE_HIGH>; output-high; line-name = "OTG EXTLPn"; }; - otg_offvbusn { + otg-offvbusn-hog { gpio-hog; gpios = <8 GPIO_ACTIVE_HIGH>; output-low; line-name = "OTG OFFVBUSn"; }; - sd-wifi-mux { + sd-wifi-mux-hog { gpio-hog; gpios = <5 GPIO_ACTIVE_HIGH>; output-low; /* Connect WL1837 */ line-name = "SD WiFi mux"; }; - snd_rst { + snd-rst-hog { gpio-hog; gpios = <15 GPIO_ACTIVE_HIGH>; /* P17 */ output-high; -- 2.17.1