[PATCH v10 13/13] arm64: defconfig: enable the sl28cpld board management controller

[Michael Walle <michael@xxxxxxxx>]

Enable the kernel modules for the board management controller "sl28cpld"
which is used on the SMARC-sAL28 board.

Signed-off-by: Michael Walle <michael@xxxxxxxx>
---
Changes since v9:
 - none

Changes since v8:
 - none

Changes since v7:
 - added new virtual symbol CONFIG_MFD_SL28CPLD

Changes since v6:
 - none

Changes since v5:
 - new patch

 arch/arm64/configs/defconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 63003ec116ee..6b410dec4447 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -510,6 +510,7 @@ CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_BD9571MWV=m
 CONFIG_GPIO_MAX77620=y
+CONFIG_GPIO_SL28CPLD=m
 CONFIG_POWER_AVS=y
 CONFIG_QCOM_CPR=y
 CONFIG_ROCKCHIP_IODOMAIN=y
@@ -523,6 +524,7 @@ CONFIG_SENSORS_ARM_SCPI=y
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_PWM_FAN=m
 CONFIG_SENSORS_RASPBERRYPI_HWMON=m
+CONFIG_SENSORS_SL28CPLD=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_SENSORS_INA3221=m
 CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
@@ -545,6 +547,7 @@ CONFIG_QCOM_TSENS=y
 CONFIG_QCOM_SPMI_TEMP_ALARM=m
 CONFIG_UNIPHIER_THERMAL=y
 CONFIG_WATCHDOG=y
+CONFIG_SL28CPLD_WATCHDOG=m
 CONFIG_ARM_SP805_WATCHDOG=y
 CONFIG_ARM_SBSA_WATCHDOG=y
 CONFIG_ARM_SMC_WATCHDOG=y
@@ -570,6 +573,7 @@ CONFIG_MFD_MAX77620=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK808=y
 CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_SL28CPLD=y
 CONFIG_MFD_ROHM_BD718XX=y
 CONFIG_MFD_WCD934X=m
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -971,8 +975,10 @@ CONFIG_PWM_MESON=m
 CONFIG_PWM_RCAR=m
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_PWM_SAMSUNG=y
+CONFIG_PWM_SL28CPLD=m
 CONFIG_PWM_SUN4I=m
 CONFIG_PWM_TEGRA=m
+CONFIG_SL28CPLD_INTC=y
 CONFIG_QCOM_PDC=y
 CONFIG_RESET_IMX7=y
 CONFIG_RESET_QCOM_AOSS=y
-- 
2.20.1