Re: [PATCH] pinctrl: sh-pfc: r8a7790: Add VIN pins used by iwg21d-q7-dbcm-ca board

[Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>]

Hi Prabhakar,

On Mon, Sep 7, 2020 at 4:55 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> Add vin[1,2] data8 and vin1_clk_b pins used by iwg21d-q7-dbcm-ca board
> which is based on R8A7742 SoC.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>

Thanks for your patch!

> --- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> @@ -3866,6 +3866,18 @@ static const unsigned int vin1_data18_mux[] = {
>         VI1_R4_MARK, VI1_R5_MARK,
>         VI1_R6_MARK, VI1_R7_MARK,
>  };
> +static const unsigned int vin1_data8_b_pins[] = {
> +       RCAR_GP_PIN(3, 0), RCAR_GP_PIN(3, 1),
> +       RCAR_GP_PIN(3, 2), RCAR_GP_PIN(3, 3),
> +       RCAR_GP_PIN(3, 4), RCAR_GP_PIN(3, 5),
> +       RCAR_GP_PIN(3, 6), RCAR_GP_PIN(3, 7),
> +};
> +static const unsigned int vin1_data8_b_mux[] = {
> +       VI1_DATA0_VI1_B0_B_MARK, VI1_DATA1_VI1_B1_B_MARK,
> +       VI1_DATA2_VI1_B2_B_MARK, VI1_DATA3_VI1_B3_B_MARK,
> +       VI1_DATA4_VI1_B4_B_MARK, VI1_DATA5_VI1_B5_B_MARK,
> +       VI1_DATA6_VI1_B6_B_MARK, VI1_DATA7_VI1_B7_B_MARK,
> +};

I don't think "vin1_data8_b" is a good name for this subset, as it would
conflict with the name for the first 8 pins of the full 24-bit VIN1 "B"
pin set, to be declared with

    static const union vin_data vin1_data_b_pins[] = { ... };

and VIN_DATA_PIN_GROUP(vin1_data, 8, _b) macro.

This would be easier to see if you would add the complete VIN1 "B" pin
set (which I prefer), and not just the parts you need for your camera
board.

>  static const unsigned int vin1_sync_pins[] = {
>         RCAR_GP_PIN(1, 24), /* HSYNC */
>         RCAR_GP_PIN(1, 25), /* VSYNC */
> @@ -3886,6 +3898,12 @@ static const unsigned int vin1_clkenb_pins[] = {
>  static const unsigned int vin1_clkenb_mux[] = {
>         VI1_CLKENB_MARK,
>  };

Please add vin1_sync_b and vin1_field_b while at it.

> +static const unsigned int vin1_clk_b_pins[] = {
> +       RCAR_GP_PIN(3, 15),
> +};
> +static const unsigned int vin1_clk_b_mux[] = {
> +       VI1_CLK_B_MARK,
> +};

Please insert "vin1_clk_b" below "vin1_clk".

>  static const unsigned int vin1_clk_pins[] = {
>         RCAR_GP_PIN(2, 9),
>  };
> @@ -3959,6 +3977,18 @@ static const unsigned int vin2_data18_mux[] = {
>         VI2_R4_MARK, VI2_R5_MARK,
>         VI2_R6_MARK, VI2_R7_MARK,
>  };
> +static const unsigned int vin2_data8_g_pins[] = {
> +       RCAR_GP_PIN(0, 27), RCAR_GP_PIN(0, 28),
> +       RCAR_GP_PIN(0, 29), RCAR_GP_PIN(1, 10),
> +       RCAR_GP_PIN(1, 4), RCAR_GP_PIN(1, 5),
> +       RCAR_GP_PIN(1, 6), RCAR_GP_PIN(1, 7),
> +};
> +static const unsigned int vin2_data8_g_mux[] = {
> +       VI2_G0_MARK, VI2_G1_MARK,
> +       VI2_G2_MARK, VI2_G3_MARK,
> +       VI2_G4_MARK, VI2_G5_MARK,
> +       VI2_G6_MARK, VI2_G7_MARK,
> +};

I think "vin2_data8_g" is also a bad name, as the "g" suffix means the
green subchannel of the "vin2_data" pin group, while the "b" suffix in
"vin1_data8_b" means the "b" alternative pin group.

Perhaps "vin2_data8g"?

Niklas, Laurent: do you have any comments?

>  static const unsigned int vin2_sync_pins[] = {
>         RCAR_GP_PIN(1, 16), /* HSYNC */
>         RCAR_GP_PIN(1, 21), /* VSYNC */
> @@ -4026,7 +4056,7 @@ static const unsigned int vin3_clk_mux[] = {
>  };
>
>  static const struct {
> -       struct sh_pfc_pin_group common[298];
> +       struct sh_pfc_pin_group common[301];
>         struct sh_pfc_pin_group automotive[1];
>  } pinmux_groups = {
>         .common = {
> @@ -4310,15 +4340,18 @@ static const struct {
>                 VIN_DATA_PIN_GROUP(vin1_data, 10),
>                 VIN_DATA_PIN_GROUP(vin1_data, 8),
>                 VIN_DATA_PIN_GROUP(vin1_data, 4),
> +               SH_PFC_PIN_GROUP(vin1_data8_b),
>                 SH_PFC_PIN_GROUP(vin1_sync),
>                 SH_PFC_PIN_GROUP(vin1_field),
>                 SH_PFC_PIN_GROUP(vin1_clkenb),
> +               SH_PFC_PIN_GROUP(vin1_clk_b),

Please insert "vin1_clk_b" below "vin1_clk".

>                 SH_PFC_PIN_GROUP(vin1_clk),
>                 VIN_DATA_PIN_GROUP(vin2_data, 24),
>                 SH_PFC_PIN_GROUP(vin2_data18),
>                 VIN_DATA_PIN_GROUP(vin2_data, 16),
>                 VIN_DATA_PIN_GROUP(vin2_data, 8),
>                 VIN_DATA_PIN_GROUP(vin2_data, 4),
> +               SH_PFC_PIN_GROUP(vin2_data8_g),
>                 SH_PFC_PIN_GROUP(vin2_sync),
>                 SH_PFC_PIN_GROUP(vin2_field),
>                 SH_PFC_PIN_GROUP(vin2_clkenb),
> @@ -4784,9 +4817,11 @@ static const char * const vin1_groups[] = {
>         "vin1_data10",
>         "vin1_data8",
>         "vin1_data4",
> +       "vin1_data8_b",
>         "vin1_sync",
>         "vin1_field",
>         "vin1_clkenb",
> +       "vin1_clk_b",

Please insert "vin1_clk_b" below "vin1_clk".

>         "vin1_clk",
>  };
>
> @@ -4796,6 +4831,7 @@ static const char * const vin2_groups[] = {
>         "vin2_data16",
>         "vin2_data8",
>         "vin2_data4",
> +       "vin2_data8_g",
>         "vin2_sync",
>         "vin2_field",
>         "vin2_clkenb",

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds