[PATCH v2 12/18] tools: gpio: port lsgpio to v2 uAPI

[Kent Gibson <warthog618@xxxxxxxxx>]

Port the lsgpio tool to the latest GPIO uAPI.

Signed-off-by: Kent Gibson <warthog618@xxxxxxxxx>
---
 tools/gpio/lsgpio.c | 102 ++++++++++++++++++++------------------------
 1 file changed, 47 insertions(+), 55 deletions(-)

diff --git a/tools/gpio/lsgpio.c b/tools/gpio/lsgpio.c
index b08d7a5e779b..0a993d535707 100644
--- a/tools/gpio/lsgpio.c
+++ b/tools/gpio/lsgpio.c
@@ -23,58 +23,50 @@
 
 #include "gpio-utils.h"
 
-struct gpio_flag {
-	char *name;
-	unsigned long mask;
-};
-
-struct gpio_flag flagnames[] = {
-	{
-		.name = "kernel",
-		.mask = GPIOLINE_FLAG_KERNEL,
-	},
-	{
-		.name = "output",
-		.mask = GPIOLINE_FLAG_IS_OUT,
-	},
-	{
-		.name = "active-low",
-		.mask = GPIOLINE_FLAG_ACTIVE_LOW,
-	},
-	{
-		.name = "open-drain",
-		.mask = GPIOLINE_FLAG_OPEN_DRAIN,
-	},
-	{
-		.name = "open-source",
-		.mask = GPIOLINE_FLAG_OPEN_SOURCE,
-	},
-	{
-		.name = "pull-up",
-		.mask = GPIOLINE_FLAG_BIAS_PULL_UP,
-	},
-	{
-		.name = "pull-down",
-		.mask = GPIOLINE_FLAG_BIAS_PULL_DOWN,
-	},
-	{
-		.name = "bias-disabled",
-		.mask = GPIOLINE_FLAG_BIAS_DISABLE,
-	},
-};
-
-void print_flags(unsigned long flags)
+static void print_attributes(struct gpioline_info_v2 *info)
 {
 	int i;
-	int printed = 0;
-
-	for (i = 0; i < ARRAY_SIZE(flagnames); i++) {
-		if (flags & flagnames[i].mask) {
-			if (printed)
-				fprintf(stdout, " ");
-			fprintf(stdout, "%s", flagnames[i].name);
-			printed++;
-		}
+	const char *field_format = "%s";
+
+	if (info->flags & GPIOLINE_FLAG_V2_USED) {
+		fprintf(stdout, field_format, "used");
+		field_format = ", %s";
+	}
+
+	if (info->flags & GPIOLINE_FLAG_V2_OUTPUT)
+		fprintf(stdout, field_format, "output");
+	else
+		fprintf(stdout, field_format, "input");
+
+	field_format = ", %s";
+
+	if (info->flags & GPIOLINE_FLAG_V2_ACTIVE_LOW)
+		fprintf(stdout, field_format, "active-low");
+
+	if (info->flags & GPIOLINE_FLAG_V2_OPEN_DRAIN)
+		fprintf(stdout, field_format, "open-drain");
+	if (info->flags & GPIOLINE_FLAG_V2_OPEN_SOURCE)
+		fprintf(stdout, field_format, "open-source");
+
+	if (info->flags & GPIOLINE_FLAG_V2_BIAS_DISABLED)
+		fprintf(stdout, field_format, "bias-disabled");
+	if (info->flags == GPIOLINE_FLAG_V2_BIAS_PULL_UP)
+		fprintf(stdout, field_format, "pull-up");
+	if (info->flags == GPIOLINE_FLAG_V2_BIAS_PULL_DOWN)
+		fprintf(stdout, field_format, "pull-down");
+
+	if ((info->flags & GPIOLINE_FLAG_V2_EDGE_RISING) &&
+	    (info->flags & GPIOLINE_FLAG_V2_EDGE_FALLING))
+		fprintf(stdout, field_format, "both-edges");
+	else if (info->flags & GPIOLINE_FLAG_V2_EDGE_RISING)
+		fprintf(stdout, field_format, "rising-edge");
+	else if (info->flags & GPIOLINE_FLAG_V2_EDGE_FALLING)
+		fprintf(stdout, field_format, "falling-edge");
+
+	for (i = 0; i < info->num_attrs; i++) {
+		if (info->attrs[i].id == GPIOLINE_ATTR_ID_DEBOUNCE)
+			fprintf(stdout, ", debounce_period=%dusec",
+				info->attrs[0].debounce_period);
 	}
 }
 
@@ -109,18 +101,18 @@ int list_device(const char *device_name)
 
 	/* Loop over the lines and print info */
 	for (i = 0; i < cinfo.lines; i++) {
-		struct gpioline_info linfo;
+		struct gpioline_info_v2 linfo;
 
 		memset(&linfo, 0, sizeof(linfo));
-		linfo.line_offset = i;
+		linfo.offset = i;
 
-		ret = ioctl(fd, GPIO_GET_LINEINFO_IOCTL, &linfo);
+		ret = ioctl(fd, GPIO_GET_LINEINFO_V2_IOCTL, &linfo);
 		if (ret == -1) {
 			ret = -errno;
 			perror("Failed to issue LINEINFO IOCTL\n");
 			goto exit_close_error;
 		}
-		fprintf(stdout, "\tline %2d:", linfo.line_offset);
+		fprintf(stdout, "\tline %2d:", linfo.offset);
 		if (linfo.name[0])
 			fprintf(stdout, " \"%s\"", linfo.name);
 		else
@@ -131,7 +123,7 @@ int list_device(const char *device_name)
 			fprintf(stdout, " unused");
 		if (linfo.flags) {
 			fprintf(stdout, " [");
-			print_flags(linfo.flags);
+			print_attributes(&linfo);
 			fprintf(stdout, "]");
 		}
 		fprintf(stdout, "\n");
-- 
2.27.0