Re: [PATCH v5 12/13] arm64: dts: freescale: sl28: enable LED support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi!

> Now that we have support for GPIO lines of the SMARC connector, enable
> LED support on the KBox A-230-LS. There are two LEDs without fixed
> functions, one is yellow and one is green. Unfortunately, it is just one
> multi-color LED, thus while it is possible to enable both at the same
> time it is hard to tell the difference between "yellow only" and "yellow
> and green".

> +		user_yellow {
> +			label = "s1914:yellow:user";
> +			gpios = <&sl28cpld_gpio0 0 0>;
> +		};
> +
> +		user_green {
> +			label = "s1914:green:user";
> +			gpios = <&sl28cpld_gpio1 3 0>;
> +		};

This is not suitable label for such LEDs... there's zero chance userland will
know what to do with these.

Do they have some kind of "usual" function?

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux