[PATCH v2 02/11] clk: sunxi-ng: add support for the Allwinner A100 CCU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for a100 in the sunxi-ng CCU framework.

Signed-off-by: Frank Lee <frank@xxxxxxxxxxxxxxxxx>
---
 drivers/clk/sunxi-ng/Kconfig                  |   10 +
 drivers/clk/sunxi-ng/Makefile                 |    2 +
 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c      |  214 +++++
 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h      |   21 +
 drivers/clk/sunxi-ng/ccu-sun50i-a100.c        | 1261 +++++++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun50i-a100.h        |   56 ++
 include/dt-bindings/clock/sun50i-a100-ccu.h   |  116 +++
 include/dt-bindings/clock/sun50i-a100-r-ccu.h |   23 +
 include/dt-bindings/reset/sun50i-a100-ccu.h   |   68 ++
 include/dt-bindings/reset/sun50i-a100-r-ccu.h |   18 +
 10 files changed, 1789 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.h
 create mode 100644 include/dt-bindings/clock/sun50i-a100-ccu.h
 create mode 100644 include/dt-bindings/clock/sun50i-a100-r-ccu.h
 create mode 100644 include/dt-bindings/reset/sun50i-a100-ccu.h
 create mode 100644 include/dt-bindings/reset/sun50i-a100-r-ccu.h

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index cdf3330..ce5f584 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -17,6 +17,16 @@ config SUN50I_A64_CCU
 	default ARM64 && ARCH_SUNXI
 	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
 
+config SUN50I_A100_CCU
+	bool "Support for the Allwinner A100 CCU"
+	default ARM64 && ARCH_SUNXI
+	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+
+config SUN50I_A100_R_CCU
+	bool "Support for the Allwinner A100 PRCM CCU"
+	default ARM64 && ARCH_SUNXI
+	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+
 config SUN50I_H6_CCU
 	bool "Support for the Allwinner H6 CCU"
 	default ARM64 && ARCH_SUNXI
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 4c7bee8..3eb5cff 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -23,6 +23,8 @@ obj-y				+= ccu_mp.o
 # SoC support
 obj-$(CONFIG_SUNIV_F1C100S_CCU)	+= ccu-suniv-f1c100s.o
 obj-$(CONFIG_SUN50I_A64_CCU)	+= ccu-sun50i-a64.o
+obj-$(CONFIG_SUN50I_A100_CCU)	+= ccu-sun50i-a100.o
+obj-$(CONFIG_SUN50I_A100_R_CCU)	+= ccu-sun50i-a100-r.o
 obj-$(CONFIG_SUN50I_H6_CCU)	+= ccu-sun50i-h6.o
 obj-$(CONFIG_SUN50I_H6_R_CCU)	+= ccu-sun50i-h6-r.o
 obj-$(CONFIG_SUN4I_A10_CCU)	+= ccu-sun4i-a10.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c b/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c
new file mode 100644
index 0000000..d6dbd355
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 Frank Lee <frank@xxxxxxxxxxxxxxxxx>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_nm.h"
+
+#include "ccu-sun50i-a100-r.h"
+
+static const char * const cpus_r_apb2_parents[] = { "dcxo24M", "osc32k",
+						     "iosc", "pll-periph0" };
+static const struct ccu_mux_var_prediv cpus_r_apb2_predivs[] = {
+	{ .index = 3, .shift = 0, .width = 5 },
+};
+
+static struct ccu_div r_cpus_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 24,
+		.width	= 2,
+
+		.var_predivs	= cpus_r_apb2_predivs,
+		.n_var_predivs	= ARRAY_SIZE(cpus_r_apb2_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x000,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("cpus",
+						      cpus_r_apb2_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static CLK_FIXED_FACTOR_HW(r_ahb_clk, "r-ahb", &r_cpus_clk.common.hw, 1, 1, 0);
+
+static struct ccu_div r_apb1_clk = {
+	.div		= _SUNXI_CCU_DIV(0, 2),
+
+	.common		= {
+		.reg		= 0x00c,
+		.hw.init	= CLK_HW_INIT("r-apb1",
+					      "r-ahb",
+					      &ccu_div_ops,
+					      0),
+	},
+};
+
+static struct ccu_div r_apb2_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 24,
+		.width	= 2,
+
+		.var_predivs	= cpus_r_apb2_predivs,
+		.n_var_predivs	= ARRAY_SIZE(cpus_r_apb2_predivs),
+	},
+
+	.common		= {
+		.reg		= 0x010,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("r-apb2",
+						      cpus_r_apb2_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static const struct clk_parent_data clk_parent_r_apb1[] = {
+	{ .hw = &r_apb1_clk.common.hw },
+};
+
+static const struct clk_parent_data clk_parent_r_apb2[] = {
+	{ .hw = &r_apb2_clk.common.hw },
+};
+
+static SUNXI_CCU_GATE_DATA(r_apb1_timer_clk, "r-apb1-timer", clk_parent_r_apb1,
+			   0x11c, BIT(0), 0);
+
+static SUNXI_CCU_GATE_DATA(r_apb1_twd_clk, "r-apb1-twd", clk_parent_r_apb1,
+			   0x12c, BIT(0), 0);
+
+static const char * const r_apb1_pwm_clk_parents[] = { "dcxo24M", "osc32k",
+						       "iosc" };
+static SUNXI_CCU_MUX(r_apb1_pwm_clk, "r-apb1-pwm", r_apb1_pwm_clk_parents,
+		     0x130, 24, 2, 0);
+
+static SUNXI_CCU_GATE_DATA(r_apb1_bus_pwm_clk, "r-apb1-bus-pwm",
+			   clk_parent_r_apb1, 0x13c, BIT(0), 0);
+
+static SUNXI_CCU_GATE_DATA(r_apb1_ppu_clk, "r-apb1-ppu", clk_parent_r_apb1,
+			   0x17c, BIT(0), 0);
+
+static SUNXI_CCU_GATE_DATA(r_apb2_uart_clk, "r-apb2-uart", clk_parent_r_apb2,
+			   0x18c, BIT(0), 0);
+
+static SUNXI_CCU_GATE_DATA(r_apb2_i2c0_clk, "r-apb2-i2c0", clk_parent_r_apb2,
+			   0x19c, BIT(0), 0);
+
+static SUNXI_CCU_GATE_DATA(r_apb2_i2c1_clk, "r-apb2-i2c1", clk_parent_r_apb2,
+			   0x19c, BIT(1), 0);
+
+static const char * const r_apb1_ir_rx_parents[] = { "osc32k", "dcxo24M" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(r_apb1_ir_rx_clk, "r-apb1-ir-rx",
+				  r_apb1_ir_rx_parents, 0x1c0,
+				  0, 5,		/* M */
+				  8, 2,		/* P */
+				  24, 1,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE_DATA(r_apb1_bus_ir_rx_clk, "r-apb1-bus-ir-rx",
+			   clk_parent_r_apb1, 0x1cc, BIT(0), 0);
+
+static SUNXI_CCU_GATE(r_ahb_bus_rtc_clk, "r-ahb-rtc", "r-ahb",
+		      0x20c, BIT(0), 0);
+
+static struct ccu_common *sun50i_a100_r_ccu_clks[] = {
+	&r_cpus_clk.common,
+	&r_apb1_clk.common,
+	&r_apb2_clk.common,
+	&r_apb1_timer_clk.common,
+	&r_apb1_twd_clk.common,
+	&r_apb1_pwm_clk.common,
+	&r_apb1_bus_pwm_clk.common,
+	&r_apb1_ppu_clk.common,
+	&r_apb2_uart_clk.common,
+	&r_apb2_i2c0_clk.common,
+	&r_apb2_i2c1_clk.common,
+	&r_apb1_ir_rx_clk.common,
+	&r_apb1_bus_ir_rx_clk.common,
+	&r_ahb_bus_rtc_clk.common,
+};
+
+static struct clk_hw_onecell_data sun50i_a100_r_hw_clks = {
+	.hws	= {
+		[CLK_R_CPUS]		= &r_cpus_clk.common.hw,
+		[CLK_R_AHB]		= &r_ahb_clk.hw,
+		[CLK_R_APB1]		= &r_apb1_clk.common.hw,
+		[CLK_R_APB2]		= &r_apb2_clk.common.hw,
+		[CLK_R_APB1_TIMER]	= &r_apb1_timer_clk.common.hw,
+		[CLK_R_APB1_TWD]	= &r_apb1_twd_clk.common.hw,
+		[CLK_R_APB1_PWM]	= &r_apb1_pwm_clk.common.hw,
+		[CLK_R_APB1_BUS_PWM]	= &r_apb1_bus_pwm_clk.common.hw,
+		[CLK_R_APB1_PPU]	= &r_apb1_ppu_clk.common.hw,
+		[CLK_R_APB2_UART]	= &r_apb2_uart_clk.common.hw,
+		[CLK_R_APB2_I2C0]	= &r_apb2_i2c0_clk.common.hw,
+		[CLK_R_APB2_I2C1]	= &r_apb2_i2c1_clk.common.hw,
+		[CLK_R_APB1_IR]		= &r_apb1_ir_rx_clk.common.hw,
+		[CLK_R_APB1_BUS_IR]	= &r_apb1_bus_ir_rx_clk.common.hw,
+		[CLK_R_AHB_BUS_RTC]	= &r_ahb_bus_rtc_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun50i_a100_r_ccu_resets[] = {
+	[RST_R_APB1_TIMER]	=  { 0x11c, BIT(16) },
+	[RST_R_APB1_BUS_PWM]	=  { 0x13c, BIT(16) },
+	[RST_R_APB1_PPU]	=  { 0x17c, BIT(16) },
+	[RST_R_APB2_UART]	=  { 0x18c, BIT(16) },
+	[RST_R_APB2_I2C0]	=  { 0x19c, BIT(16) },
+	[RST_R_APB2_I2C1]	=  { 0x19c, BIT(17) },
+	[RST_R_APB1_BUS_IR]	=  { 0x1cc, BIT(16) },
+	[RST_R_AHB_BUS_RTC]	=  { 0x20c, BIT(16) },
+};
+
+static const struct sunxi_ccu_desc sun50i_a100_r_ccu_desc = {
+	.ccu_clks	= sun50i_a100_r_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun50i_a100_r_ccu_clks),
+
+	.hw_clks	= &sun50i_a100_r_hw_clks,
+
+	.resets		= sun50i_a100_r_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun50i_a100_r_ccu_resets),
+};
+
+static int sun50i_a100_r_ccu_probe(struct platform_device *pdev)
+{
+	void __iomem *reg;
+
+	reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a100_r_ccu_desc);
+}
+
+static const struct of_device_id sun50i_a100_r_ccu_ids[] = {
+	{ .compatible = "allwinner,sun50i-a100-r-ccu" },
+	{ }
+};
+
+static struct platform_driver sun50i_a100_r_ccu_driver = {
+	.probe	= sun50i_a100_r_ccu_probe,
+	.driver	= {
+		.name	= "sun50i-a100-r-ccu",
+		.of_match_table	= sun50i_a100_r_ccu_ids,
+	},
+};
+module_platform_driver(sun50i_a100_r_ccu_driver);
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h b/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h
new file mode 100644
index 0000000..a541259
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Frank Lee <frank@xxxxxxxxxxxxxxxxx>
+ */
+
+#ifndef _CCU_SUN50IW10_R_H
+#define _CCU_SUN50IW10_R_H
+
+#include <dt-bindings/clock/sun50i-a100-r-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-r-ccu.h>
+
+#define CLK_R_CPUS		0
+#define CLK_R_AHB		1
+
+/* exported except APB1 for R_PIO */
+
+#define CLK_R_APB2		3
+
+#define CLK_NUMBER	(CLK_R_AHB_BUS_RTC + 1)
+
+#endif /* _CCU_SUN50IW10_R_H */
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a100.c b/drivers/clk/sunxi-ng/ccu-sun50i-a100.c
new file mode 100644
index 0000000..57c6910
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100.c
@@ -0,0 +1,1261 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 Frank Lee <frank@xxxxxxxxxxxxxxxxx>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+
+#include "ccu-sun50i-a100.h"
+
+/*
+ * The CPU PLL is actually NP clock, with P being /1, /2 or /4. However
+ * P should only be used for output frequencies lower than 288 MHz.
+ *
+ * For now we can just model it as a multiplier clock, and force P to /1.
+ *
+ * The M factor is present in the register's description, but not in the
+ * frequency formula, and it's documented as "M is only used for backdoor
+ * testing", so it's not modelled and then force to 0.
+ */
+#define SUN50I_A100_PLL_CPUX_REG		0x000
+static struct ccu_mult pll_cpux_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.mult		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.common		= {
+		.reg		= 0x000,
+		.hw.init	= CLK_HW_INIT("pll-cpux", "dcxo24M",
+					      &ccu_mult_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */
+#define SUN50I_A100_PLL_DDR0_REG		0x010
+static struct ccu_nkmp pll_ddr0_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x010,
+		.hw.init	= CLK_HW_INIT("pll-ddr0", "dcxo24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE |
+					      CLK_IS_CRITICAL),
+	},
+};
+
+#define SUN50I_A100_PLL_PERIPH0_REG	0x020
+static struct ccu_nkmp pll_periph0_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.fixed_post_div	= 2,
+	.common		= {
+		.reg		= 0x020,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-periph0", "dcxo24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_A100_PLL_PERIPH1_REG	0x028
+static struct ccu_nkmp pll_periph1_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.fixed_post_div	= 2,
+	.common		= {
+		.reg		= 0x028,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-periph1", "dcxo24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+#define SUN50I_A100_PLL_PERIPH1_PATTERN0_REG	0x128
+
+#define SUN50I_A100_PLL_GPU_REG		0x030
+static struct ccu_nkmp pll_gpu_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x030,
+		.hw.init	= CLK_HW_INIT("pll-gpu", "dcxo24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/*
+ * For Video PLLs, the output divider is described as "used for testing"
+ * in the user manual. So it's not modelled and forced to 0.
+ */
+#define SUN50I_A100_PLL_VIDEO0_REG	0x040
+static struct ccu_nm pll_video0_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.fixed_post_div	= 4,
+	.common		= {
+		.reg		= 0x040,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-video0", "dcxo24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_A100_PLL_VIDEO1_REG	0x048
+static struct ccu_nm pll_video1_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.fixed_post_div	= 4,
+	.common		= {
+		.reg		= 0x048,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-video1", "dcxo24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_A100_PLL_VIDEO2_REG	0x050
+static struct ccu_nm pll_video2_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.fixed_post_div	= 4,
+	.common		= {
+		.reg		= 0x050,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-video2", "dcxo24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_A100_PLL_VE_REG		0x058
+static struct ccu_nkmp pll_ve_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x058,
+		.hw.init	= CLK_HW_INIT("pll-ve", "dcxo24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/*
+ * The COM PLL has m0 dividers in addition to the usual N, M
+ * factors. Since we only need 1 frequencies from this PLL: 45.1584 MHz,
+ * ignore it for now.
+ */
+#define SUN50I_A100_PLL_COM_REG		0x060
+static struct ccu_sdm_setting pll_com_sdm_table[] = {
+	{ .rate = 451584000, .pattern = 0xc0014396, .m = 2, .n = 37 },
+};
+
+static struct ccu_nm pll_com_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(0, 1),
+	.sdm		= _SUNXI_CCU_SDM(pll_com_sdm_table, BIT(24),
+					 0x160, BIT(31)),
+	.common		= {
+		.reg		= 0x060,
+		.features	= CCU_FEATURE_SIGMA_DELTA_MOD,
+		.hw.init	= CLK_HW_INIT("pll-com", "dcxo24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_A100_PLL_VIDEO3_REG	0x068
+static struct ccu_nm pll_video3_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.fixed_post_div	= 4,
+	.common		= {
+		.reg		= 0x068,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-video3", "dcxo24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/*
+ * The Audio PLL has m0, m1 dividers in addition to the usual N, M
+ * factors. Since we only need 4 frequencies from this PLL: 22.5792 MHz,
+ * 24.576 MHz, 90.3168MHz and 98.304MHz ignore them for now.
+ * Enforce the default for them, which is m0 = 1, m1 = 0.
+ */
+#define SUN50I_A100_PLL_AUDIO_REG		0x078
+static struct ccu_sdm_setting pll_audio_sdm_table[] = {
+	{ .rate = 45158400, .pattern = 0xc001bcd3, .m = 18, .n = 33 },
+	{ .rate = 49152000, .pattern = 0xc001eb85, .m = 20, .n = 40 },
+	{ .rate = 180633600, .pattern = 0xc001288d, .m = 3, .n = 22 },
+	{ .rate = 196608000, .pattern = 0xc001eb85, .m = 5, .n = 40 },
+};
+
+static struct ccu_nm pll_audio_clk = {
+	.enable		= BIT(27),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(16, 6),
+	.fixed_post_div	= 2,
+	.sdm		= _SUNXI_CCU_SDM(pll_audio_sdm_table, BIT(24),
+					 0x178, BIT(31)),
+	.common		= {
+		.reg		= 0x078,
+		.features	= CCU_FEATURE_FIXED_POSTDIV |
+				  CCU_FEATURE_SIGMA_DELTA_MOD,
+		.hw.init	= CLK_HW_INIT("pll-audio", "dcxo24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+static const char * const cpux_parents[] = { "dcxo24M", "osc32k",
+					     "iosc", "pll-cpux",
+					      "pll-periph0" };
+static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
+		     0x500, 24, 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0);
+static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2, 0);
+
+static const char * const psi_ahb1_ahb2_parents[] = { "dcxo24M", "osc32k",
+						      "iosc", "pll-periph0",
+						      "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
+			     psi_ahb1_ahb2_parents,
+			     0x510,
+			     0, 2,	/* M */
+			     8, 2,	/* P */
+			     24, 3,	/* mux */
+			     0);
+
+static const char * const ahb3_apb1_apb2_parents[] = { "dcxo24M", "osc32k",
+						       "psi-ahb1-ahb2",
+						       "pll-periph0",
+						       "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
+			     0, 2,	/* M */
+			     8, 2,	/* P */
+			     24, 3,	/* mux */
+			     0);
+
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
+			     0, 2,	/* M */
+			     8, 2,	/* P */
+			     24, 3,	/* mux */
+			     0);
+
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
+			     0, 2,	/* M */
+			     8, 2,	/* P */
+			     24, 3,	/* mux */
+			     0);
+
+static const char * const mbus_parents[] = { "dcxo24M", "pll-ddr0",
+					     "pll-periph0",
+					     "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x540,
+				 0, 3,		/* M */
+				 24, 2,		/* mux */
+				 BIT(31),	/* gate */
+				 CLK_IS_CRITICAL);
+
+static const char * const de_parents[] = { "pll-com", "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de0", de_parents, 0x600,
+				 0, 4,		/* M */
+				 24, 1,		/* mux */
+				 BIT(31),	/* gate */
+				 CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
+		      0x60c, BIT(0), 0);
+
+static const char * const g2d_parents[] = { "pll-com", "pll-periph0-2x",
+					     "pll-video0-2x", "pll-video1-2x",
+					     "pll-video2-2x"};
+static SUNXI_CCU_M_WITH_MUX_GATE(g2d_clk, "g2d",
+				 g2d_parents,
+				 0x630,
+				 0, 4,		/* M */
+				 24, 3,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_GATE(bus_g2d_clk, "bus-g2d", "psi-ahb1-ahb2",
+		      0x63c, BIT(0), 0);
+
+static const char * const gpu_parents[] = { "pll-gpu" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu_clk, "gpu", gpu_parents, 0x670,
+				       0, 2,	/* M */
+				       24, 1,	/* mux */
+				       BIT(31),	/* gate */
+				       0);
+
+static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2",
+		      0x67c, BIT(0), 0);
+
+static const char * const ce_parents[] = { "dcxo24M", "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 1,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2",
+		      0x68c, BIT(0), 0);
+
+static const char * const ve_parents[] = { "pll-ve" };
+static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
+				 0, 3,		/* M */
+				 24, 1,		/* mux */
+				 BIT(31),	/* gate */
+				 CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
+		      0x69c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2",
+		      0x70c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "psi-ahb1-ahb2",
+		      0x71c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "psi-ahb1-ahb2",
+		      0x72c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-ahb2",
+		      0x73c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "dcxo24M", 0x740, BIT(31), 0);
+
+static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2",
+		      0x78c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2",
+		      0x79c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x7ac, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0);
+
+static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus",
+		      0x804, BIT(0), 0);
+static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus",
+		      0x804, BIT(1), 0);
+static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus",
+		      0x804, BIT(2), 0);
+static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus",
+		      0x804, BIT(5), 0);
+static SUNXI_CCU_GATE(mbus_csi_clk, "mbus-csi", "mbus",
+		      0x804, BIT(8), 0);
+static SUNXI_CCU_GATE(mbus_isp_clk, "mbus-isp", "mbus",
+		      0x804, BIT(9), 0);
+static SUNXI_CCU_GATE(mbus_g2d_clk, "mbus-g2d", "mbus",
+		      0x804, BIT(10), 0);
+
+static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2",
+		      0x80c, BIT(0), CLK_IS_CRITICAL);
+
+static const char * const nand_spi_parents[] = { "dcxo24M",
+						 "pll-periph0",
+						 "pll-periph1",
+						 "pll-periph0-2x",
+						 "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0", nand_spi_parents, 0x810,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1", nand_spi_parents, 0x814,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0);
+
+static const char * const mmc_parents[] = { "dcxo24M", "pll-periph0-2x",
+					    "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830,
+					  0, 4,		/* M */
+					  8, 2,		/* N */
+					  24, 2,	/* mux */
+					  BIT(31),	/* gate */
+					  2,		/* post-div */
+					  CLK_SET_RATE_NO_REPARENT);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
+					  0, 4,		/* M */
+					  8, 2,		/* N */
+					  24, 2,	/* mux */
+					  BIT(31),	/* gate */
+					  2,		/* post-div */
+					  CLK_SET_RATE_NO_REPARENT);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838,
+					  0, 4,		/* M */
+					  8, 2,		/* N */
+					  24, 2,	/* mux */
+					  BIT(31),	/* gate */
+					  2,		/* post-div */
+					  CLK_SET_RATE_NO_REPARENT);
+
+static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c, BIT(2), 0);
+
+static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2", 0x90c, BIT(4), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c, BIT(3), 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", nand_spi_parents, 0x940,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", nand_spi_parents, 0x944,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", nand_spi_parents, 0x948,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_spi2_clk, "bus-spi2", "ahb3", 0x96c, BIT(2), 0);
+
+static SUNXI_CCU_GATE(emac_25m_clk, "emac-25m", "ahb3", 0x970,
+		      BIT(31) | BIT(30), 0);
+
+static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb3", 0x97c, BIT(0), 0);
+
+static const char * const ir_parents[] = { "osc32k", "iosc",
+					   "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir_rx_clk, "ir-rx", ir_parents, 0x990,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(bus_ir_rx_clk, "bus-ir-rx", "ahb3", 0x99c, BIT(0), 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir_tx_clk, "ir-tx", ir_parents, 0x9c0,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(bus_ir_tx_clk, "bus-ir-tx", "apb1", 0x9cc, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_gpadc_clk, "bus-gpadc", "apb1", 0x9ec, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0), 0);
+
+static const char * const audio_parents[] = { "pll-audio", "pll-com-audio" };
+static struct ccu_div i2s0_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa10,
+		.hw.init	= CLK_HW_INIT_PARENTS("i2s0",
+						      audio_parents,
+						      &ccu_div_ops,
+						      CLK_SET_RATE_PARENT),
+	},
+};
+
+static struct ccu_div i2s1_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa14,
+		.hw.init	= CLK_HW_INIT_PARENTS("i2s1",
+						      audio_parents,
+						      &ccu_div_ops,
+						      CLK_SET_RATE_PARENT),
+	},
+};
+
+static struct ccu_div i2s2_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa18,
+		.hw.init	= CLK_HW_INIT_PARENTS("i2s2",
+						      audio_parents,
+						      &ccu_div_ops,
+						      CLK_SET_RATE_PARENT),
+	},
+};
+
+static struct ccu_div i2s3_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa1c,
+		.hw.init	= CLK_HW_INIT_PARENTS("i2s3",
+						      audio_parents,
+						      &ccu_div_ops,
+						      CLK_SET_RATE_PARENT),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1", 0xa20, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1", 0xa20, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1", 0xa20, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2s3_clk, "bus-i2s3", "apb1", 0xa20, BIT(3), 0);
+
+static struct ccu_div spdif_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa24,
+		.hw.init	= CLK_HW_INIT_PARENTS("spdif",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c, BIT(0), 0);
+
+static struct ccu_div dmic_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa40,
+		.hw.init	= CLK_HW_INIT_PARENTS("dmic",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c, BIT(0), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_dac_clk, "audio-codec-dac",
+				 audio_parents, 0xa50,
+				 0, 4,		/* M */
+				 24, 2,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_adc_clk, "audio-codec-adc",
+				 audio_parents, 0xa54,
+				 0, 4,		/* M */
+				 24, 2,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_4x_clk, "audio-codec-4x",
+				 audio_parents, 0xa58,
+				 0, 4,		/* M */
+				 24, 2,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_GATE(bus_audio_codec_clk, "bus-audio-codec", "apb1", 0xa5c,
+		      BIT(0), 0);
+
+/*
+ * There are OHCI 12M clock source selection bits for 2 USB 2.0 ports.
+ * We will force them to 0 (12M divided from 48M).
+ */
+#define SUN50I_A100_USB0_CLK_REG		0xa70
+#define SUN50I_A100_USB1_CLK_REG		0xa74
+
+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "dcxo24M", 0xa70, BIT(29), 0);
+
+static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc12M", 0xa74, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "dcxo24M", 0xa74, BIT(29), 0);
+
+static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb3", 0xa8c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb3", 0xa8c, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8), 0);
+
+static SUNXI_CCU_GATE(bus_lradc_clk, "bus-lradc", "ahb3", 0xa9c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_dpss_top0_clk, "bus-dpss-top0", "ahb3",
+		      0xabc, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_dpss_top1_clk, "bus-dpss-top1", "ahb3",
+		      0xacc, BIT(0), 0);
+
+static const char * const mipi_dsi_parents[] = { "dcxo24M", "pll-periph0-2x",
+						 "pll-periph0" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mipi_dsi_clk, "mipi-dsi",
+				 mipi_dsi_parents,
+				 0xb24,
+				 0, 4,		/* M */
+				 24, 2,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb3",
+		      0xb4c, BIT(0), 0);
+
+static const char * const tcon_lcd_parents[] = { "pll-video0-4x",
+						  "pll-video1-4x",
+						  "pll-video2-4x",
+						  "pll-video3-4x",
+						  "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_lcd_clk, "tcon-lcd0",
+				  tcon_lcd_parents, 0xb60,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(bus_tcon_lcd_clk, "bus-tcon-lcd0", "ahb3",
+		      0xb7c, BIT(0), 0);
+
+static const char * const ledc_parents[] = { "dcxo24M",
+					     "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ledc_clk, "ledc",
+				  ledc_parents, 0xbf0,
+				  0, 4,		/* M */
+				  8, 2,		/* N */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(bus_ledc_clk, "bus-ledc", "ahb3", 0xbfc, BIT(0), 0);
+
+static const char * const csi_top_parents[] = { "pll-periph0-2x",
+						"pll-video0-2x",
+						"pll-video1-2x",
+						"pll-video2-2x",
+						"pll-video3-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_top_clk, "csi-top",
+				 csi_top_parents, 0xc04,
+				 0, 4,		/* M */
+				 24, 3,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static const char * const csi0_mclk_parents[] = { "dcxo24M", "pll-video2",
+						  "pll-video3", "pll-video0",
+						  "pll-video1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk",
+				 csi0_mclk_parents, 0xc08,
+				 0, 5,		/* M */
+				 24, 3,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static const char * const csi1_mclk_parents[] = { "dcxo24M", "pll-video3",
+						  "pll-video0", "pll-video1",
+						  "pll-video2" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi1-mclk",
+				 csi1_mclk_parents, 0xc0c,
+				 0, 5,		/* M */
+				 24, 3,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb3", 0xc1c, BIT(0), 0);
+
+static const char * const csi_isp_parents[] = { "pll-periph0-2x",
+						"pll-video0-2x",
+						"pll-video1-2x",
+						"pll-video2-2x",
+						"pll-video3-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_isp_clk, "csi-isp",
+				 csi_isp_parents, 0xc20,
+				 0, 5,		/* M */
+				 24, 3,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+/* Fixed factor clocks */
+static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1, 0);
+
+static CLK_FIXED_FACTOR_HW(pll_com_audio_clk, "pll-com-audio",
+			   &pll_com_clk.common.hw,
+			   5, 1, CLK_SET_RATE_PARENT);
+
+static CLK_FIXED_FACTOR_HW(pll_periph0_2x_clk, "pll-periph0-2x",
+			   &pll_periph0_clk.common.hw,
+			   1, 2, 0);
+
+static CLK_FIXED_FACTOR_HW(pll_periph1_2x_clk, "pll-periph1-2x",
+			   &pll_periph1_clk.common.hw,
+			   1, 2, 0);
+
+static const struct clk_hw *pll_video0_parents[] = {
+	&pll_video0_clk.common.hw
+};
+static CLK_FIXED_FACTOR_HWS(pll_video0_4x_clk, "pll-video0-4x",
+			    pll_video0_parents,
+			    1, 4, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HWS(pll_video0_2x_clk, "pll-video0-2x",
+			    pll_video0_parents,
+			    1, 2, CLK_SET_RATE_PARENT);
+
+static const struct clk_hw *pll_video1_parents[] = {
+	&pll_video1_clk.common.hw
+};
+static CLK_FIXED_FACTOR_HWS(pll_video1_4x_clk, "pll-video1-4x",
+			    pll_video1_parents,
+			    1, 4, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HWS(pll_video1_2x_clk, "pll-video1-2x",
+			    pll_video1_parents,
+			    1, 2, CLK_SET_RATE_PARENT);
+
+static const struct clk_hw *pll_video2_parents[] = {
+	&pll_video2_clk.common.hw
+};
+static CLK_FIXED_FACTOR_HWS(pll_video2_4x_clk, "pll-video2-4x",
+			    pll_video2_parents,
+			    1, 4, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HWS(pll_video2_2x_clk, "pll-video2-2x",
+			    pll_video2_parents,
+			    1, 2, CLK_SET_RATE_PARENT);
+
+static const struct clk_hw *pll_video3_parents[] = {
+	&pll_video3_clk.common.hw
+};
+static CLK_FIXED_FACTOR_HWS(pll_video3_4x_clk, "pll-video3-4x",
+			    pll_video3_parents,
+			    1, 4, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HWS(pll_video3_2x_clk, "pll-video3-2x",
+			    pll_video3_parents,
+			    1, 2, CLK_SET_RATE_PARENT);
+
+static struct ccu_common *sun50i_a100_ccu_clks[] = {
+	&pll_cpux_clk.common,
+	&pll_ddr0_clk.common,
+	&pll_periph0_clk.common,
+	&pll_periph1_clk.common,
+	&pll_gpu_clk.common,
+	&pll_video0_clk.common,
+	&pll_video1_clk.common,
+	&pll_video2_clk.common,
+	&pll_video3_clk.common,
+	&pll_ve_clk.common,
+	&pll_com_clk.common,
+	&pll_audio_clk.common,
+	&cpux_clk.common,
+	&axi_clk.common,
+	&cpux_apb_clk.common,
+	&psi_ahb1_ahb2_clk.common,
+	&ahb3_clk.common,
+	&apb1_clk.common,
+	&apb2_clk.common,
+	&mbus_clk.common,
+	&de_clk.common,
+	&bus_de_clk.common,
+	&g2d_clk.common,
+	&bus_g2d_clk.common,
+	&gpu_clk.common,
+	&bus_gpu_clk.common,
+	&ce_clk.common,
+	&bus_ce_clk.common,
+	&ve_clk.common,
+	&bus_ve_clk.common,
+	&bus_dma_clk.common,
+	&bus_msgbox_clk.common,
+	&bus_spinlock_clk.common,
+	&bus_hstimer_clk.common,
+	&avs_clk.common,
+	&bus_dbg_clk.common,
+	&bus_psi_clk.common,
+	&bus_pwm_clk.common,
+	&bus_iommu_clk.common,
+	&mbus_dma_clk.common,
+	&mbus_ve_clk.common,
+	&mbus_ce_clk.common,
+	&mbus_nand_clk.common,
+	&mbus_csi_clk.common,
+	&mbus_isp_clk.common,
+	&mbus_g2d_clk.common,
+	&bus_dram_clk.common,
+	&nand0_clk.common,
+	&nand1_clk.common,
+	&bus_nand_clk.common,
+	&mmc0_clk.common,
+	&mmc1_clk.common,
+	&mmc2_clk.common,
+	&bus_mmc0_clk.common,
+	&bus_mmc1_clk.common,
+	&bus_mmc2_clk.common,
+	&bus_uart0_clk.common,
+	&bus_uart1_clk.common,
+	&bus_uart2_clk.common,
+	&bus_uart3_clk.common,
+	&bus_uart4_clk.common,
+	&bus_i2c0_clk.common,
+	&bus_i2c1_clk.common,
+	&bus_i2c2_clk.common,
+	&bus_i2c3_clk.common,
+	&spi0_clk.common,
+	&spi1_clk.common,
+	&spi2_clk.common,
+	&bus_spi0_clk.common,
+	&bus_spi1_clk.common,
+	&bus_spi2_clk.common,
+	&emac_25m_clk.common,
+	&bus_emac_clk.common,
+	&ir_rx_clk.common,
+	&bus_ir_rx_clk.common,
+	&ir_tx_clk.common,
+	&bus_ir_tx_clk.common,
+	&bus_gpadc_clk.common,
+	&bus_ths_clk.common,
+	&i2s0_clk.common,
+	&i2s1_clk.common,
+	&i2s2_clk.common,
+	&i2s3_clk.common,
+	&bus_i2s0_clk.common,
+	&bus_i2s1_clk.common,
+	&bus_i2s2_clk.common,
+	&bus_i2s3_clk.common,
+	&spdif_clk.common,
+	&bus_spdif_clk.common,
+	&dmic_clk.common,
+	&bus_dmic_clk.common,
+	&audio_codec_dac_clk.common,
+	&audio_codec_adc_clk.common,
+	&audio_codec_4x_clk.common,
+	&bus_audio_codec_clk.common,
+	&usb_ohci0_clk.common,
+	&usb_phy0_clk.common,
+	&usb_ohci1_clk.common,
+	&usb_phy1_clk.common,
+	&bus_ohci0_clk.common,
+	&bus_ohci1_clk.common,
+	&bus_ehci0_clk.common,
+	&bus_ehci1_clk.common,
+	&bus_otg_clk.common,
+	&bus_lradc_clk.common,
+	&bus_dpss_top0_clk.common,
+	&bus_dpss_top1_clk.common,
+	&mipi_dsi_clk.common,
+	&bus_mipi_dsi_clk.common,
+	&tcon_lcd_clk.common,
+	&bus_tcon_lcd_clk.common,
+	&ledc_clk.common,
+	&bus_ledc_clk.common,
+	&csi_top_clk.common,
+	&csi0_mclk_clk.common,
+	&csi1_mclk_clk.common,
+	&bus_csi_clk.common,
+	&csi_isp_clk.common,
+};
+
+static struct clk_hw_onecell_data sun50i_a100_hw_clks = {
+	.hws	= {
+		[CLK_OSC12M]		= &osc12M_clk.hw,
+		[CLK_PLL_CPUX]		= &pll_cpux_clk.common.hw,
+		[CLK_PLL_DDR0]		= &pll_ddr0_clk.common.hw,
+		[CLK_PLL_PERIPH0]	= &pll_periph0_clk.common.hw,
+		[CLK_PLL_PERIPH0_2X]	= &pll_periph0_2x_clk.hw,
+		[CLK_PLL_PERIPH1]	= &pll_periph1_clk.common.hw,
+		[CLK_PLL_PERIPH1_2X]	= &pll_periph1_2x_clk.hw,
+		[CLK_PLL_GPU]		= &pll_gpu_clk.common.hw,
+		[CLK_PLL_VIDEO0]	= &pll_video0_clk.common.hw,
+		[CLK_PLL_VIDEO0_2X]	= &pll_video0_2x_clk.hw,
+		[CLK_PLL_VIDEO0_4X]	= &pll_video0_4x_clk.hw,
+		[CLK_PLL_VIDEO1]	= &pll_video1_clk.common.hw,
+		[CLK_PLL_VIDEO1_2X]	= &pll_video1_2x_clk.hw,
+		[CLK_PLL_VIDEO1_4X]	= &pll_video1_4x_clk.hw,
+		[CLK_PLL_VIDEO2]	= &pll_video2_clk.common.hw,
+		[CLK_PLL_VIDEO2_2X]	= &pll_video2_2x_clk.hw,
+		[CLK_PLL_VIDEO2_4X]	= &pll_video2_4x_clk.hw,
+		[CLK_PLL_VIDEO3]	= &pll_video3_clk.common.hw,
+		[CLK_PLL_VIDEO3_2X]	= &pll_video3_2x_clk.hw,
+		[CLK_PLL_VIDEO3_4X]	= &pll_video3_4x_clk.hw,
+		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
+		[CLK_PLL_COM]		= &pll_com_clk.common.hw,
+		[CLK_PLL_COM_AUDIO]	= &pll_com_audio_clk.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.common.hw,
+		[CLK_CPUX]		= &cpux_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_CPUX_APB]		= &cpux_apb_clk.common.hw,
+		[CLK_PSI_AHB1_AHB2]	= &psi_ahb1_ahb2_clk.common.hw,
+		[CLK_AHB3]		= &ahb3_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_APB2]		= &apb2_clk.common.hw,
+		[CLK_MBUS]		= &mbus_clk.common.hw,
+		[CLK_DE]		= &de_clk.common.hw,
+		[CLK_BUS_DE]		= &bus_de_clk.common.hw,
+		[CLK_G2D]		= &g2d_clk.common.hw,
+		[CLK_BUS_G2D]		= &bus_g2d_clk.common.hw,
+		[CLK_GPU]		= &gpu_clk.common.hw,
+		[CLK_BUS_GPU]		= &bus_gpu_clk.common.hw,
+		[CLK_CE]		= &ce_clk.common.hw,
+		[CLK_BUS_CE]		= &bus_ce_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
+		[CLK_BUS_DMA]		= &bus_dma_clk.common.hw,
+		[CLK_BUS_MSGBOX]	= &bus_msgbox_clk.common.hw,
+		[CLK_BUS_SPINLOCK]	= &bus_spinlock_clk.common.hw,
+		[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_BUS_DBG]		= &bus_dbg_clk.common.hw,
+		[CLK_BUS_PSI]		= &bus_psi_clk.common.hw,
+		[CLK_BUS_PWM]		= &bus_pwm_clk.common.hw,
+		[CLK_BUS_IOMMU]		= &bus_iommu_clk.common.hw,
+		[CLK_MBUS_DMA]		= &mbus_dma_clk.common.hw,
+		[CLK_MBUS_VE]		= &mbus_ve_clk.common.hw,
+		[CLK_MBUS_CE]		= &mbus_ce_clk.common.hw,
+		[CLK_MBUS_NAND]		= &mbus_nand_clk.common.hw,
+		[CLK_MBUS_CSI]		= &mbus_csi_clk.common.hw,
+		[CLK_MBUS_ISP]		= &mbus_isp_clk.common.hw,
+		[CLK_MBUS_G2D]		= &mbus_g2d_clk.common.hw,
+		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
+		[CLK_NAND0]		= &nand0_clk.common.hw,
+		[CLK_NAND1]		= &nand1_clk.common.hw,
+		[CLK_BUS_NAND]		= &bus_nand_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
+		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
+		[CLK_BUS_MMC2]		= &bus_mmc2_clk.common.hw,
+		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
+		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
+		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
+		[CLK_BUS_UART3]		= &bus_uart3_clk.common.hw,
+		[CLK_BUS_UART4]		= &bus_uart4_clk.common.hw,
+		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
+		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
+		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
+		[CLK_BUS_I2C3]		= &bus_i2c3_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_SPI1]		= &spi1_clk.common.hw,
+		[CLK_SPI2]		= &spi2_clk.common.hw,
+		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
+		[CLK_BUS_SPI1]		= &bus_spi1_clk.common.hw,
+		[CLK_BUS_SPI2]		= &bus_spi2_clk.common.hw,
+		[CLK_EMAC_25M]		= &emac_25m_clk.common.hw,
+		[CLK_BUS_EMAC]		= &bus_emac_clk.common.hw,
+		[CLK_IR_RX]		= &ir_rx_clk.common.hw,
+		[CLK_BUS_IR_RX]		= &bus_ir_rx_clk.common.hw,
+		[CLK_IR_TX]		= &ir_tx_clk.common.hw,
+		[CLK_BUS_IR_TX]		= &bus_ir_tx_clk.common.hw,
+		[CLK_BUS_GPADC]		= &bus_gpadc_clk.common.hw,
+		[CLK_BUS_THS]		= &bus_ths_clk.common.hw,
+		[CLK_I2S0]		= &i2s0_clk.common.hw,
+		[CLK_I2S1]		= &i2s1_clk.common.hw,
+		[CLK_I2S2]		= &i2s2_clk.common.hw,
+		[CLK_I2S3]		= &i2s3_clk.common.hw,
+		[CLK_BUS_I2S0]		= &bus_i2s0_clk.common.hw,
+		[CLK_BUS_I2S1]		= &bus_i2s1_clk.common.hw,
+		[CLK_BUS_I2S2]		= &bus_i2s2_clk.common.hw,
+		[CLK_BUS_I2S3]		= &bus_i2s3_clk.common.hw,
+		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_BUS_SPDIF]		= &bus_spdif_clk.common.hw,
+		[CLK_DMIC]		= &dmic_clk.common.hw,
+		[CLK_BUS_DMIC]		= &bus_dmic_clk.common.hw,
+		[CLK_AUDIO_DAC]		= &audio_codec_dac_clk.common.hw,
+		[CLK_AUDIO_ADC]		= &audio_codec_adc_clk.common.hw,
+		[CLK_AUDIO_4X]		= &audio_codec_4x_clk.common.hw,
+		[CLK_BUS_AUDIO_CODEC]	= &bus_audio_codec_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
+		[CLK_USB_OHCI1]		= &usb_ohci1_clk.common.hw,
+		[CLK_USB_PHY1]		= &usb_phy1_clk.common.hw,
+		[CLK_BUS_OHCI0]		= &bus_ohci0_clk.common.hw,
+		[CLK_BUS_OHCI1]		= &bus_ohci1_clk.common.hw,
+		[CLK_BUS_EHCI0]		= &bus_ehci0_clk.common.hw,
+		[CLK_BUS_EHCI1]		= &bus_ehci1_clk.common.hw,
+		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
+		[CLK_BUS_LRADC]		= &bus_lradc_clk.common.hw,
+		[CLK_BUS_DPSS_TOP0]	= &bus_dpss_top0_clk.common.hw,
+		[CLK_BUS_DPSS_TOP1]	= &bus_dpss_top1_clk.common.hw,
+		[CLK_MIPI_DSI]		= &mipi_dsi_clk.common.hw,
+		[CLK_BUS_MIPI_DSI]	= &bus_mipi_dsi_clk.common.hw,
+		[CLK_TCON_LCD]		= &tcon_lcd_clk.common.hw,
+		[CLK_BUS_TCON_LCD]	= &bus_tcon_lcd_clk.common.hw,
+		[CLK_LEDC]		= &ledc_clk.common.hw,
+		[CLK_BUS_LEDC]		= &bus_ledc_clk.common.hw,
+		[CLK_CSI_TOP]		= &csi_top_clk.common.hw,
+		[CLK_CSI0_MCLK]		= &csi0_mclk_clk.common.hw,
+		[CLK_CSI1_MCLK]		= &csi1_mclk_clk.common.hw,
+		[CLK_BUS_CSI]		= &bus_csi_clk.common.hw,
+		[CLK_CSI_ISP]		= &csi_isp_clk.common.hw,
+	},
+	.num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun50i_a100_ccu_resets[] = {
+	[RST_MBUS]		= { 0x540, BIT(30) },
+
+	[RST_BUS_DE]		= { 0x60c, BIT(16) },
+	[RST_BUS_G2D]		= { 0x63c, BIT(16) },
+	[RST_BUS_GPU]		= { 0x67c, BIT(16) },
+	[RST_BUS_CE]		= { 0x68c, BIT(16) },
+	[RST_BUS_VE]		= { 0x69c, BIT(16) },
+	[RST_BUS_DMA]		= { 0x70c, BIT(16) },
+	[RST_BUS_MSGBOX]	= { 0x71c, BIT(16) },
+	[RST_BUS_SPINLOCK]	= { 0x72c, BIT(16) },
+	[RST_BUS_HSTIMER]	= { 0x73c, BIT(16) },
+	[RST_BUS_DBG]		= { 0x78c, BIT(16) },
+	[RST_BUS_PSI]		= { 0x79c, BIT(16) },
+	[RST_BUS_PWM]		= { 0x7ac, BIT(16) },
+	[RST_BUS_DRAM]		= { 0x80c, BIT(16) },
+	[RST_BUS_NAND]		= { 0x82c, BIT(16) },
+	[RST_BUS_MMC0]		= { 0x84c, BIT(16) },
+	[RST_BUS_MMC1]		= { 0x84c, BIT(17) },
+	[RST_BUS_MMC2]		= { 0x84c, BIT(18) },
+	[RST_BUS_UART0]		= { 0x90c, BIT(16) },
+	[RST_BUS_UART1]		= { 0x90c, BIT(17) },
+	[RST_BUS_UART2]		= { 0x90c, BIT(18) },
+	[RST_BUS_UART3]		= { 0x90c, BIT(19) },
+	[RST_BUS_UART4]		= { 0x90c, BIT(20) },
+	[RST_BUS_I2C0]		= { 0x91c, BIT(16) },
+	[RST_BUS_I2C1]		= { 0x91c, BIT(17) },
+	[RST_BUS_I2C2]		= { 0x91c, BIT(18) },
+	[RST_BUS_I2C3]		= { 0x91c, BIT(19) },
+	[RST_BUS_SPI0]		= { 0x96c, BIT(16) },
+	[RST_BUS_SPI1]		= { 0x96c, BIT(17) },
+	[RST_BUS_SPI2]		= { 0x96c, BIT(18) },
+	[RST_BUS_EMAC]		= { 0x97c, BIT(16) },
+	[RST_BUS_IR_RX]		= { 0x99c, BIT(16) },
+	[RST_BUS_IR_TX]		= { 0x9cc, BIT(16) },
+	[RST_BUS_GPADC]		= { 0x9ec, BIT(16) },
+	[RST_BUS_THS]		= { 0x9fc, BIT(16) },
+	[RST_BUS_I2S0]		= { 0xa20, BIT(16) },
+	[RST_BUS_I2S1]		= { 0xa20, BIT(17) },
+	[RST_BUS_I2S2]		= { 0xa20, BIT(18) },
+	[RST_BUS_I2S3]		= { 0xa20, BIT(19) },
+	[RST_BUS_SPDIF]		= { 0xa2c, BIT(16) },
+	[RST_BUS_DMIC]		= { 0xa4c, BIT(16) },
+	[RST_BUS_AUDIO_CODEC]	= { 0xa5c, BIT(16) },
+
+	[RST_USB_PHY0]		= { 0xa70, BIT(30) },
+	[RST_USB_PHY1]		= { 0xa74, BIT(30) },
+
+	[RST_BUS_OHCI0]		= { 0xa8c, BIT(16) },
+	[RST_BUS_OHCI1]		= { 0xa8c, BIT(17) },
+	[RST_BUS_EHCI0]		= { 0xa8c, BIT(20) },
+	[RST_BUS_EHCI1]		= { 0xa8c, BIT(21) },
+	[RST_BUS_OTG]		= { 0xa8c, BIT(24) },
+
+	[RST_BUS_LRADC]		= { 0xa9c, BIT(16) },
+	[RST_BUS_DPSS_TOP0]	= { 0xabc, BIT(16) },
+	[RST_BUS_DPSS_TOP1]	= { 0xacc, BIT(16) },
+	[RST_BUS_MIPI_DSI]	= { 0xb4c, BIT(16) },
+	[RST_BUS_TCON_LCD]	= { 0xb7c, BIT(16) },
+	[RST_BUS_LVDS]		= { 0xbac, BIT(16) },
+	[RST_BUS_LEDC]		= { 0xbfc, BIT(16) },
+	[RST_BUS_CSI]		= { 0xc1c, BIT(16) },
+	[RST_BUS_CSI_ISP]	= { 0xc2c, BIT(16) },
+};
+
+static const struct sunxi_ccu_desc sun50i_a100_ccu_desc = {
+	.ccu_clks	= sun50i_a100_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun50i_a100_ccu_clks),
+
+	.hw_clks	= &sun50i_a100_hw_clks,
+
+	.resets		= sun50i_a100_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun50i_a100_ccu_resets),
+};
+
+static const u32 sun50i_a100_pll_regs[] = {
+	SUN50I_A100_PLL_CPUX_REG,
+	SUN50I_A100_PLL_DDR0_REG,
+	SUN50I_A100_PLL_PERIPH0_REG,
+	SUN50I_A100_PLL_PERIPH1_REG,
+	SUN50I_A100_PLL_GPU_REG,
+	SUN50I_A100_PLL_VIDEO0_REG,
+	SUN50I_A100_PLL_VIDEO1_REG,
+	SUN50I_A100_PLL_VIDEO2_REG,
+	SUN50I_A100_PLL_VIDEO3_REG,
+	SUN50I_A100_PLL_VE_REG,
+	SUN50I_A100_PLL_COM_REG,
+	SUN50I_A100_PLL_AUDIO_REG,
+};
+
+static const u32 sun50i_a100_pll_video_regs[] = {
+	SUN50I_A100_PLL_VIDEO0_REG,
+	SUN50I_A100_PLL_VIDEO1_REG,
+	SUN50I_A100_PLL_VIDEO2_REG,
+	SUN50I_A100_PLL_VIDEO3_REG,
+};
+
+static const u32 sun50i_a100_usb2_clk_regs[] = {
+	SUN50I_A100_USB0_CLK_REG,
+	SUN50I_A100_USB1_CLK_REG,
+};
+
+static struct ccu_pll_nb sun50i_a100_pll_cpu_nb = {
+	.common = &pll_cpux_clk.common,
+	/* copy from pll_cpux_clk */
+	.enable = BIT(27),
+	.lock   = BIT(28),
+};
+
+static struct ccu_mux_nb sun50i_a100_cpu_nb = {
+	.common         = &cpux_clk.common,
+	.cm             = &cpux_clk.mux,
+	.delay_us       = 1,
+	.bypass_index   = 4, /* index of pll periph0 */
+};
+
+static int sun50i_a100_ccu_probe(struct platform_device *pdev)
+{
+	void __iomem *reg;
+	u32 val;
+	int i, ret;
+
+	reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	/* Enable the lock bits on all PLLs */
+	for (i = 0; i < ARRAY_SIZE(sun50i_a100_pll_regs); i++) {
+		val = readl(reg + sun50i_a100_pll_regs[i]);
+		val |= BIT(29);
+		writel(val, reg + sun50i_a100_pll_regs[i]);
+	}
+
+	/*
+	 * In order to pass the EMI certification, the SDM function of
+	 * the peripheral 1 bus is enabled, and the frequency is still
+	 * calculated using the previous division factor.
+	 */
+	writel(0xd1303333, reg + SUN50I_A100_PLL_PERIPH1_PATTERN0_REG);
+
+	val = readl(reg + SUN50I_A100_PLL_PERIPH1_REG);
+	val |= BIT(24);
+	writel(val, reg + SUN50I_A100_PLL_PERIPH1_REG);
+
+	/*
+	 * Force the output divider of video PLLs to 0.
+	 *
+	 * See the comment before pll-video0 definition for the reason.
+	 */
+	for (i = 0; i < ARRAY_SIZE(sun50i_a100_pll_video_regs); i++) {
+		val = readl(reg + sun50i_a100_pll_video_regs[i]);
+		val &= ~BIT(0);
+		writel(val, reg + sun50i_a100_pll_video_regs[i]);
+	}
+
+	/*
+	 * Enforce m1 = 0, m0 = 1 for Audio PLL
+	 *
+	 * See the comment before pll-audio definition for the reason.
+	 */
+	val = readl(reg + SUN50I_A100_PLL_AUDIO_REG);
+	val &= ~BIT(1);
+	val |= BIT(0);
+	writel(val, reg + SUN50I_A100_PLL_AUDIO_REG);
+
+	/*
+	 * Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz)
+	 *
+	 * This clock mux is still mysterious, and the code just enforces
+	 * it to have a valid clock parent.
+	 */
+	for (i = 0; i < ARRAY_SIZE(sun50i_a100_usb2_clk_regs); i++) {
+		val = readl(reg + sun50i_a100_usb2_clk_regs[i]);
+		val &= ~GENMASK(25, 24);
+		writel(val, reg + sun50i_a100_usb2_clk_regs[i]);
+	}
+
+	ret = sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a100_ccu_desc);
+	if (ret)
+		return ret;
+
+	/* Gate then ungate PLL CPU after any rate changes */
+	ccu_pll_notifier_register(&sun50i_a100_pll_cpu_nb);
+
+	/* Reparent CPU during PLL CPU rate changes */
+	ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
+				  &sun50i_a100_cpu_nb);
+
+	return 0;
+}
+
+static const struct of_device_id sun50i_a100_ccu_ids[] = {
+	{ .compatible = "allwinner,sun50i-a100-ccu" },
+	{ }
+};
+
+static struct platform_driver sun50i_a100_ccu_driver = {
+	.probe	= sun50i_a100_ccu_probe,
+	.driver	= {
+		.name	= "sun50i-a100-ccu",
+		.of_match_table	= sun50i_a100_ccu_ids,
+	},
+};
+module_platform_driver(sun50i_a100_ccu_driver);
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a100.h b/drivers/clk/sunxi-ng/ccu-sun50i-a100.h
new file mode 100644
index 0000000..a599320
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Frank Lee <frank@xxxxxxxxxxxxxxxxx>
+ */
+
+#ifndef _CCU_SUN50I_A100_H_
+#define _CCU_SUN50I_A100_H_
+
+#include <dt-bindings/clock/sun50i-a100-ccu.h>
+#include <dt-bindings/reset/sun50i-a100-ccu.h>
+
+#define CLK_OSC12M		0
+#define CLK_PLL_CPUX		1
+#define CLK_PLL_DDR0		2
+
+/* PLL_PERIPH0 exported for PRCM */
+
+#define CLK_PLL_PERIPH0_2X	4
+#define CLK_PLL_PERIPH1		5
+#define CLK_PLL_PERIPH1_2X	6
+#define CLK_PLL_GPU		7
+#define CLK_PLL_VIDEO0		8
+#define CLK_PLL_VIDEO0_2X	9
+#define CLK_PLL_VIDEO0_4X	10
+#define CLK_PLL_VIDEO1		11
+#define CLK_PLL_VIDEO1_2X	12
+#define CLK_PLL_VIDEO1_4X	13
+#define CLK_PLL_VIDEO2		14
+#define CLK_PLL_VIDEO2_2X	15
+#define CLK_PLL_VIDEO2_4X	16
+#define CLK_PLL_VIDEO3		17
+#define CLK_PLL_VIDEO3_2X	18
+#define CLK_PLL_VIDEO3_4X	19
+#define CLK_PLL_VE		20
+#define CLK_PLL_COM		21
+#define CLK_PLL_COM_AUDIO	22
+#define CLK_PLL_AUDIO		23
+
+/* CPUX clock exported for DVFS */
+
+#define CLK_AXI			25
+#define CLK_CPUX_APB		26
+#define CLK_PSI_AHB1_AHB2	27
+#define CLK_AHB3		28
+
+/* APB1 clock exported for PIO */
+
+#define CLK_APB2		30
+
+/* All module clocks and bus gates are exported except DRAM */
+
+#define CLK_BUS_DRAM		58
+
+#define CLK_NUMBER		(CLK_CSI_ISP + 1)
+
+#endif /* _CCU_SUN50I_A100_H_ */
diff --git a/include/dt-bindings/clock/sun50i-a100-ccu.h b/include/dt-bindings/clock/sun50i-a100-ccu.h
new file mode 100644
index 0000000..8cdf563
--- /dev/null
+++ b/include/dt-bindings/clock/sun50i-a100-ccu.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2020 Frank Lee <frank@xxxxxxxxxxxxxxxxx>
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN50I_A100_H_
+#define _DT_BINDINGS_CLK_SUN50I_A100_H_
+
+#define CLK_PLL_PERIPH0		3
+
+#define CLK_CPUX		24
+
+#define CLK_APB1		29
+
+#define CLK_MBUS		31
+#define CLK_DE			32
+#define CLK_BUS_DE		33
+#define CLK_G2D			34
+#define CLK_BUS_G2D		35
+#define CLK_GPU			36
+#define CLK_BUS_GPU		37
+#define CLK_CE			38
+#define CLK_BUS_CE		39
+#define CLK_VE			40
+#define CLK_BUS_VE		41
+#define CLK_BUS_DMA		42
+#define CLK_BUS_MSGBOX		43
+#define CLK_BUS_SPINLOCK	44
+#define CLK_BUS_HSTIMER		45
+#define CLK_AVS			46
+#define CLK_BUS_DBG		47
+#define CLK_BUS_PSI		48
+#define CLK_BUS_PWM		49
+#define CLK_BUS_IOMMU		50
+#define CLK_MBUS_DMA		51
+#define CLK_MBUS_VE		52
+#define CLK_MBUS_CE		53
+#define CLK_MBUS_NAND		54
+#define CLK_MBUS_CSI		55
+#define CLK_MBUS_ISP		56
+#define CLK_MBUS_G2D		57
+
+#define CLK_NAND0		59
+#define CLK_NAND1		60
+#define CLK_BUS_NAND		61
+#define CLK_MMC0		62
+#define CLK_MMC1		63
+#define CLK_MMC2		64
+#define CLK_MMC3		65
+#define CLK_BUS_MMC0		66
+#define CLK_BUS_MMC1		67
+#define CLK_BUS_MMC2		68
+#define CLK_BUS_UART0		69
+#define CLK_BUS_UART1		70
+#define CLK_BUS_UART2		71
+#define CLK_BUS_UART3		72
+#define CLK_BUS_UART4		73
+#define CLK_BUS_I2C0		74
+#define CLK_BUS_I2C1		75
+#define CLK_BUS_I2C2		76
+#define CLK_BUS_I2C3		77
+#define CLK_SPI0		78
+#define CLK_SPI1		79
+#define CLK_SPI2		80
+#define CLK_BUS_SPI0		81
+#define CLK_BUS_SPI1		82
+#define CLK_BUS_SPI2		83
+#define CLK_EMAC_25M		84
+#define CLK_BUS_EMAC		85
+#define CLK_IR_RX		86
+#define CLK_BUS_IR_RX		87
+#define CLK_IR_TX		88
+#define CLK_BUS_IR_TX		89
+#define CLK_BUS_GPADC		90
+#define CLK_BUS_THS		91
+#define CLK_I2S0		92
+#define CLK_I2S1		93
+#define CLK_I2S2		94
+#define CLK_I2S3		95
+#define CLK_BUS_I2S0		96
+#define CLK_BUS_I2S1		97
+#define CLK_BUS_I2S2		98
+#define CLK_BUS_I2S3		99
+#define CLK_SPDIF		100
+#define CLK_BUS_SPDIF		101
+#define CLK_DMIC		102
+#define CLK_BUS_DMIC		103
+#define CLK_AUDIO_DAC		104
+#define CLK_AUDIO_ADC		105
+#define CLK_AUDIO_4X		106
+#define CLK_BUS_AUDIO_CODEC	107
+#define CLK_USB_OHCI0		108
+#define CLK_USB_PHY0		109
+#define CLK_USB_OHCI1		110
+#define CLK_USB_PHY1		111
+#define CLK_BUS_OHCI0		112
+#define CLK_BUS_OHCI1		113
+#define CLK_BUS_EHCI0		114
+#define CLK_BUS_EHCI1		115
+#define CLK_BUS_OTG		116
+#define CLK_BUS_LRADC		117
+#define CLK_BUS_DPSS_TOP0	118
+#define CLK_BUS_DPSS_TOP1	119
+#define CLK_MIPI_DSI		120
+#define CLK_BUS_MIPI_DSI	121
+#define CLK_TCON_LCD		122
+#define CLK_BUS_TCON_LCD	123
+#define CLK_LEDC		124
+#define CLK_BUS_LEDC		125
+#define CLK_CSI_TOP		126
+#define CLK_CSI0_MCLK		127
+#define CLK_CSI1_MCLK		128
+#define CLK_BUS_CSI		129
+#define CLK_CSI_ISP		130
+
+#endif /* _DT_BINDINGS_CLK_SUN50I_A100_H_ */
diff --git a/include/dt-bindings/clock/sun50i-a100-r-ccu.h b/include/dt-bindings/clock/sun50i-a100-r-ccu.h
new file mode 100644
index 0000000..8a6cc5c
--- /dev/null
+++ b/include/dt-bindings/clock/sun50i-a100-r-ccu.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Frank Lee <frank@xxxxxxxxxxxxxxxxx>
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN50I_A100_R_CCU_H_
+#define _DT_BINDINGS_CLK_SUN50I_A100_R_CCU_H_
+
+#define CLK_R_APB1		2
+
+#define CLK_R_APB1_TIMER	4
+#define CLK_R_APB1_TWD		5
+#define CLK_R_APB1_PWM		6
+#define CLK_R_APB1_BUS_PWM	7
+#define CLK_R_APB1_PPU		8
+#define CLK_R_APB2_UART		9
+#define CLK_R_APB2_I2C0		10
+#define CLK_R_APB2_I2C1		11
+#define CLK_R_APB1_IR		12
+#define CLK_R_APB1_BUS_IR	13
+#define CLK_R_AHB_BUS_RTC	14
+
+#endif /* _DT_BINDINGS_CLK_SUN50I_A100_R_CCU_H_ */
diff --git a/include/dt-bindings/reset/sun50i-a100-ccu.h b/include/dt-bindings/reset/sun50i-a100-ccu.h
new file mode 100644
index 0000000..17b8b66
--- /dev/null
+++ b/include/dt-bindings/reset/sun50i-a100-ccu.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2020 Frank Lee <frank@xxxxxxxxxxxxxxxxx>
+ */
+
+#ifndef _DT_BINDINGS_RESET_SUN50I_A100_H_
+#define _DT_BINDINGS_RESET_SUN50I_A100_H_
+
+#define RST_MBUS		0
+#define RST_BUS_DE		1
+#define RST_BUS_G2D		2
+#define RST_BUS_GPU		3
+#define RST_BUS_CE		4
+#define RST_BUS_VE		5
+#define RST_BUS_DMA		6
+#define RST_BUS_MSGBOX		7
+#define RST_BUS_SPINLOCK	8
+#define RST_BUS_HSTIMER		9
+#define RST_BUS_DBG		10
+#define RST_BUS_PSI		11
+#define RST_BUS_PWM		12
+#define RST_BUS_DRAM		13
+#define RST_BUS_NAND		14
+#define RST_BUS_MMC0		15
+#define RST_BUS_MMC1		16
+#define RST_BUS_MMC2		17
+#define RST_BUS_UART0		18
+#define RST_BUS_UART1		19
+#define RST_BUS_UART2		20
+#define RST_BUS_UART3		21
+#define RST_BUS_UART4		22
+#define RST_BUS_I2C0		23
+#define RST_BUS_I2C1		24
+#define RST_BUS_I2C2		25
+#define RST_BUS_I2C3		26
+#define RST_BUS_SPI0		27
+#define RST_BUS_SPI1		28
+#define RST_BUS_SPI2		29
+#define RST_BUS_EMAC		30
+#define RST_BUS_IR_RX		31
+#define RST_BUS_IR_TX		32
+#define RST_BUS_GPADC		33
+#define RST_BUS_THS		34
+#define RST_BUS_I2S0		35
+#define RST_BUS_I2S1		36
+#define RST_BUS_I2S2		37
+#define RST_BUS_I2S3		38
+#define RST_BUS_SPDIF		39
+#define RST_BUS_DMIC		40
+#define RST_BUS_AUDIO_CODEC	41
+#define RST_USB_PHY0		42
+#define RST_USB_PHY1		43
+#define RST_BUS_OHCI0		44
+#define RST_BUS_OHCI1		45
+#define RST_BUS_EHCI0		46
+#define RST_BUS_EHCI1		47
+#define RST_BUS_OTG		48
+#define RST_BUS_LRADC		49
+#define RST_BUS_DPSS_TOP0	50
+#define RST_BUS_DPSS_TOP1	51
+#define RST_BUS_MIPI_DSI	52
+#define RST_BUS_TCON_LCD	53
+#define RST_BUS_LVDS		54
+#define RST_BUS_LEDC		55
+#define RST_BUS_CSI		56
+#define RST_BUS_CSI_ISP		57
+
+#endif /* _DT_BINDINGS_RESET_SUN50I_A100_H_ */
diff --git a/include/dt-bindings/reset/sun50i-a100-r-ccu.h b/include/dt-bindings/reset/sun50i-a100-r-ccu.h
new file mode 100644
index 0000000..2bf1ed4
--- /dev/null
+++ b/include/dt-bindings/reset/sun50i-a100-r-ccu.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2020 Frank Lee <frank@xxxxxxxxxxxxxxxxx>
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN50I_A100_R_CCU_H_
+#define _DT_BINDINGS_RST_SUN50I_A100_R_CCU_H_
+
+#define RST_R_APB1_TIMER	0
+#define RST_R_APB1_BUS_PWM	1
+#define RST_R_APB1_PPU		2
+#define RST_R_APB2_UART		3
+#define RST_R_APB2_I2C0		4
+#define RST_R_APB2_I2C1		5
+#define RST_R_APB1_BUS_IR	6
+#define RST_R_AHB_BUS_RTC	7
+
+#endif /* _DT_BINDINGS_RST_SUN50I_A100_R_CCU_H_ */
-- 
1.9.1





[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux