[PATCH v2 0/3] pinctrl: single: support #pinctrl-cells = 2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently, pinctrl-single only allows #pinctrl-cells = 1.

This series will allow pinctrl-single to also support #pinctrl-cells = 2

If "pinctrl-single,pins" has 3 arguments (offset, conf, mux) then
pcs_parse_one_pinctrl_entry() does an OR operation on to get the
value to store in the register.
    
To take advantage of #pinctrl-cells = 2, the AM33XX_PADCONF macro in
omap.h is modified to keep pin conf and pin mux values separate.

v2 changes:
- remove outer parentheses from AM33XX_PADCONF macro as it causes a
  compile error in dtc.  I had added it per suggestion from checkpatch
  about having parentheses around complex values.

Drew Fustini (3):
  ARM: dts: change AM33XX_PADCONF macro separate conf and mux
  ARM: dts: am33xx-l4: change #pinctrl-cells from 1 to 2
  pinctrl: single: parse #pinctrl-cells = 2

 arch/arm/boot/dts/am33xx-l4.dtsi   |  2 +-
 drivers/pinctrl/pinctrl-single.c   | 11 +++++++++--
 include/dt-bindings/pinctrl/omap.h |  2 +-
 3 files changed, 11 insertions(+), 4 deletions(-)

-- 
2.25.1




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux