Re: [PATCH 21/28] dt-bindings: gpio: Convert mrvl-gpio to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Mar 27, 2020 at 01:28:20PM -0600, Rob Herring wrote:
> On Tue, Mar 17, 2020 at 10:39:15AM +0100, Lubomir Rintel wrote:
> > This converts the mrvl-gpio binding to DT schema format using json-schema.
> > 
> > Various fixes were done during the conversion, such as adding more
> > properties that are in fact mandatory or extending the examples to
> > include child nodes with extra GPIO blocks.
> 
> Ugg, not how I would have done this. Differences in register layout 
> should be implied by the compatible strings. But I guess we have to live 
> with it now.
> 
> > The compatible strings are a mess. It is not clear why so many of them
> > are needed; the driver doesn't really seem to differentiate between the
> > models. Some of them, like marvell,pxa93x-gpio and marvell,pxa1928-gpio
> > are not used at all, so it's not known how many interrupts they utilize.
> > On the other hand, mrvl,pxa-gpio has been seen in the tree, but it
> > doesn't end up in any actual DTB file.
> 
> I added pxa1928 and then work on it ended. I think it is safe to remove, 
> but I dug up dts file and it is 1 irq.
> 
> > In any case -- the schema merely copies whatever was in the original
> > binding document, so it's hopefully no more wrong that the original.
> > 
> > Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
> > ---
> >  .../devicetree/bindings/gpio/mrvl-gpio.txt    |  48 -----
> >  .../devicetree/bindings/gpio/mrvl-gpio.yaml   | 173 ++++++++++++++++++
> >  2 files changed, 173 insertions(+), 48 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
> >  create mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
> > deleted file mode 100644
> > index 30fd2201b3d4c..0000000000000
> > --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
> > +++ /dev/null
> > @@ -1,48 +0,0 @@
> > -* Marvell PXA GPIO controller
> > -
> > -Required properties:
> > -- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio",
> > -		"intel,pxa27x-gpio", "intel,pxa3xx-gpio",
> > -		"marvell,pxa93x-gpio", "marvell,mmp-gpio",
> > -		"marvell,mmp2-gpio" or marvell,pxa1928-gpio.
> > -- reg : Address and length of the register set for the device
> > -- interrupts : Should be the port interrupt shared by all gpio pins.
> > -  There're three gpio interrupts in arch-pxa, and they're gpio0,
> > -  gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp,
> > -  gpio_mux.
> > -- interrupt-names : Should be the names of irq resources. Each interrupt
> > -  uses its own interrupt name, so there should be as many interrupt names
> > -  as referenced interrupts.
> > -- interrupt-controller : Identifies the node as an interrupt controller.
> > -- #interrupt-cells: Specifies the number of cells needed to encode an
> > -  interrupt source.
> > -- gpio-controller : Marks the device node as a gpio controller.
> > -- #gpio-cells : Should be two.  The first cell is the pin number and
> > -  the second cell is used to specify flags. See gpio.txt for possible
> > -  values.
> > -
> > -Example for a MMP platform:
> > -
> > -	gpio: gpio@d4019000 {
> > -		compatible = "marvell,mmp-gpio";
> > -		reg = <0xd4019000 0x1000>;
> > -		interrupts = <49>;
> > -		interrupt-names = "gpio_mux";
> > -		gpio-controller;
> > -		#gpio-cells = <2>;
> > -		interrupt-controller;
> > -		#interrupt-cells = <1>;
> > -      };
> > -
> > -Example for a PXA3xx platform:
> > -
> > -	gpio: gpio@40e00000 {
> > -		compatible = "intel,pxa3xx-gpio";
> > -		reg = <0x40e00000 0x10000>;
> > -		interrupt-names = "gpio0", "gpio1", "gpio_mux";
> > -		interrupts = <8 9 10>;
> > -		gpio-controller;
> > -		#gpio-cells = <0x2>;
> > -		interrupt-controller;
> > -		#interrupt-cells = <0x2>;
> > -	};
> > diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
> > new file mode 100644
> > index 0000000000000..5c713bf59b06d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
> > @@ -0,0 +1,173 @@
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/gpio/mrvl-gpio.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Marvell PXA GPIO controller
> > +
> > +maintainers:
> > +  - devicetree@xxxxxxxxxxxxxxx
> 
> Needs to be a real person that cares about this h/w.

As I've said in the cover letter -- it's not clear who would that be.

> > +
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - intel,pxa25x-gpio
> > +              - intel,pxa26x-gpio
> > +              - intel,pxa27x-gpio
> > +              - intel,pxa3xx-gpio
> > +    then:
> > +      properties:
> > +        interrupts:
> > +          minItems: 3
> > +          maxItems: 3
> > +        interrupt-names:
> > +          items:
> > +            - const: gpio0
> > +            - const: gpio1
> > +            - const: gpio_mux
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - marvell,mmp-gpio
> > +              - marvell,mmp2-gpio
> 
> I'd make this an else clause.

This would imply that marvell,pxa93x-gpio has one interrupt and it is
not know whether that is actually the case.

> > +    then:
> > +      properties:
> > +        interrupts:
> > +          maxItems: 1
> > +        interrupt-names:
> > +          items:
> > +            - const: gpio_mux
> > +
> > +properties:
> > +  $nodename:
> > +    pattern: '^gpio@[0-9a-f]+$'
> > +
> > +  compatible:
> > +    enum:
> > +      - intel,pxa25x-gpio
> > +      - intel,pxa26x-gpio
> > +      - intel,pxa27x-gpio
> > +      - intel,pxa3xx-gpio
> > +      - marvell,mmp-gpio
> > +      - marvell,mmp2-gpio
> > +      - marvell,pxa93x-gpio
> > +      - marvell,pxa1928-gpio
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    maxItems: 1
> > +
> > +  ranges: true
> > +
> > +  '#address-cells':
> > +    const: 1
> > +
> > +  '#size-cells':
> > +    const: 1
> > +
> > +  gpio-controller: true
> > +
> > +  '#gpio-cells':
> > +    const: 2
> > +
> > +  gpio-ranges:
> > +    maxItems: 1
> 
> My pxa1928 dts has this in the child nodes. Sure this is right?

I actually don't know anything about pxa1928. pxa27x.dtsi and
pxa3xx.dtsi specify gpio-ranges on main gpio nodes and have no gcb
child nodes.

> > +
> > +  interrupts: true
> > +
> > +  interrupt-names: true
> > +
> > +  interrupt-controller: true
> > +
> > +  '#interrupt-cells':
> > +    const: 2
> > +
> > +patternProperties:
> > +  '^gpio@[0-9a-f]*$':
> > +    type: object
> > +    properties:
> > +      reg:
> > +        maxItems: 1
> > +
> > +    required:
> > +      - reg
> > +
> > +    additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - '#address-cells'
> > +  - '#size-cells'
> > +  - reg
> > +  - gpio-controller
> > +  - '#gpio-cells'
> > +  - interrupts
> > +  - interrupt-names
> > +  - interrupt-controller
> > +  - '#interrupt-cells'
> > +  - ranges
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/pxa-clock.h>
> > +    gpio@40e00000 {
> > +        compatible = "intel,pxa3xx-gpio";
> > +        #address-cells = <1>;
> > +        #size-cells = <1>;
> > +        reg = <0x40e00000 0x10000>;
> > +        gpio-controller;
> > +        #gpio-cells = <2>;
> > +        interrupts = <8>, <9>, <10>;
> > +        interrupt-names = "gpio0", "gpio1", "gpio_mux";
> > +        clocks = <&clks CLK_GPIO>;
> > +        interrupt-controller;
> > +        #interrupt-cells = <2>;
> > +        ranges;
> 
> No child, so there should be no ranges here.

Will fix in next version.

> > +    };
> > +  - |
> > +    #include <dt-bindings/clock/marvell,pxa910.h>
> > +    gpio@d4019000 {
> > +        compatible = "marvell,mmp-gpio";
> > +        #address-cells = <1>;
> > +        #size-cells = <1>;
> > +        reg = <0xd4019000 0x1000>;
> > +        gpio-controller;
> > +        #gpio-cells = <2>;
> > +        interrupts = <49>;
> > +        interrupt-names = "gpio_mux";
> > +        clocks = <&soc_clocks PXA910_CLK_GPIO>;
> > +        resets = <&soc_clocks PXA910_CLK_GPIO>;
> > +        interrupt-controller;
> > +        #interrupt-cells = <2>;
> > +        ranges;
> > +
> > +        gpio@d4019000 {
> > +            reg = <0xd4019000 0x4>;
> > +        };
> > +
> > +        gpio@d4019004 {
> > +            reg = <0xd4019004 0x4>;
> > +        };
> > +
> > +        gpio@d4019008 {
> > +            reg = <0xd4019008 0x4>;
> > +        };
> > +
> > +        gpio@d4019100 {
> > +            reg = <0xd4019100 0x4>;
> > +        };
> > +     };
> > +
> > +...
> > -- 
> > 2.25.1
> > 



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux