[PATCH 12/14] clk: sparx5: Add Sparx5 SoC DPLL clock driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This adds a device driver for the Sparx5 SoC DPLL clock

Reviewed-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
Signed-off-by: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
---
 drivers/clk/Makefile     |   1 +
 drivers/clk/clk-sparx5.c | 269 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 270 insertions(+)
 create mode 100644 drivers/clk/clk-sparx5.c

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index f4169cc2fd318..9332e32667527 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o
 obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
 obj-$(CONFIG_COMMON_CLK_CS2000_CP)	+= clk-cs2000-cp.o
 obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
+obj-$(CONFIG_ARCH_SPARX5)		+= clk-sparx5.o
 obj-$(CONFIG_COMMON_CLK_FIXED_MMIO)	+= clk-fixed-mmio.o
 obj-$(CONFIG_COMMON_CLK_FSL_SAI)	+= clk-fsl-sai.o
 obj-$(CONFIG_COMMON_CLK_GEMINI)		+= clk-gemini.o
diff --git a/drivers/clk/clk-sparx5.c b/drivers/clk/clk-sparx5.c
new file mode 100644
index 0000000000000..685b3028a7071
--- /dev/null
+++ b/drivers/clk/clk-sparx5.c
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Microchip Sparx5 SoC Clock driver.
+ *
+ * Copyright (c) 2019 Microchip Inc.
+ *
+ * Author: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
+ */
+
+#include <linux/io.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/microchip,sparx5.h>
+
+#define PLL_DIV_MASK		GENMASK(7, 0)
+#define PLL_PRE_DIV_MASK	GENMASK(10, 8)
+#define PLL_PRE_DIV_SHIFT	8
+#define PLL_ROT_DIR		BIT(11)
+#define PLL_ROT_SEL_MASK	GENMASK(13, 12)
+#define PLL_ROT_SEL_SHIFT	12
+#define PLL_ROT_ENA		BIT(14)
+#define PLL_CLK_ENA		BIT(15)
+
+#define MAX_SEL 4
+#define MAX_PRE BIT(3)
+
+#define KHZ 1000
+#define MHZ (KHZ*KHZ)
+
+#define BASE_CLOCK (2500UL*MHZ)
+
+static u8 sel_rates[MAX_SEL] = { 0, 2*8, 2*4, 2*2 };
+
+static const char *clk_names[N_CLOCKS] = {
+	"core", "ddr", "cpu2", "arm2",
+	"aux1", "aux2", "aux3", "aux4",
+	"synce",
+};
+
+struct s5_hw_clk {
+	struct clk_hw hw;
+	void __iomem *reg;
+	int index;
+};
+
+struct s5_clk_data {
+	void __iomem *base;
+	struct s5_hw_clk s5_hw[N_CLOCKS];
+};
+
+struct pll_conf {
+	int freq;
+	u8 div;
+	bool rot_ena;
+	u8 rot_sel;
+	u8 rot_dir;
+	u8 pre_div;
+};
+
+#define to_clk_pll(hw) container_of(hw, struct s5_hw_clk, hw)
+
+unsigned long calc_freq(const struct pll_conf *pdata)
+{
+	unsigned long rate = BASE_CLOCK / pdata->div;
+
+	if (pdata->rot_ena) {
+		unsigned long base = BASE_CLOCK / pdata->div;
+		int sign = pdata->rot_dir ? -1 : 1;
+		int divt = sel_rates[pdata->rot_sel] * (1 + pdata->pre_div);
+		int divb = divt + sign;
+
+		rate = mult_frac(base, divt, divb);
+		rate = roundup(rate, 1000);
+	}
+
+	return rate;
+}
+
+static unsigned long clk_calc_params(unsigned long rate,
+				     struct pll_conf *conf)
+{
+	memset(conf, 0, sizeof(*conf));
+
+	conf->div = DIV_ROUND_CLOSEST_ULL(BASE_CLOCK, rate);
+
+	if (BASE_CLOCK % rate) {
+		struct pll_conf best;
+		ulong cur_offset, best_offset = rate;
+		int i, j;
+
+		/* Enable fractional rotation */
+		conf->rot_ena = true;
+
+		if ((BASE_CLOCK / rate) != conf->div) {
+			/* Overshoot, adjust other direction */
+			conf->rot_dir = 1;
+		}
+
+		/* Brute force search over MAX_PRE * (MAX_SEL - 1) = 24 */
+		for (i = 0; i < MAX_PRE; i++) {
+			conf->pre_div = i;
+			for (j = 1; j < MAX_SEL; j++) {
+				conf->rot_sel = j;
+				conf->freq = calc_freq(conf);
+				cur_offset = abs(rate - conf->freq);
+				if (cur_offset == 0)
+					/* Perfect fit */
+					goto done;
+				if (cur_offset < best_offset) {
+					/* Better fit found */
+					best_offset = cur_offset;
+					best = *conf;
+				}
+			}
+		}
+		/* Best match */
+		*conf = best;
+	}
+
+done:
+	return conf->freq;
+}
+
+static int clk_pll_enable(struct clk_hw *hw)
+{
+	struct s5_hw_clk *pll = to_clk_pll(hw);
+	u32 val = readl(pll->reg);
+
+	val |= PLL_CLK_ENA;
+	writel(val, pll->reg);
+	pr_debug("%s: Enable val %04x\n", clk_names[pll->index], val);
+	return 0;
+}
+
+static void clk_pll_disable(struct clk_hw *hw)
+{
+	struct s5_hw_clk *pll = to_clk_pll(hw);
+	u32 val = readl(pll->reg);
+
+	val &= ~PLL_CLK_ENA;
+	writel(val, pll->reg);
+	pr_debug("%s: Disable val %04x\n", clk_names[pll->index], val);
+}
+
+static int clk_pll_set_rate(struct clk_hw *hw,
+			    unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct s5_hw_clk *pll = to_clk_pll(hw);
+	struct pll_conf conf;
+	unsigned long eff_rate;
+	int ret = 0;
+
+	eff_rate = clk_calc_params(rate, &conf);
+	if (eff_rate == rate) {
+		u32 val;
+
+		val = readl(pll->reg) & PLL_CLK_ENA;
+		val |= PLL_DIV_MASK & conf.div;
+		if (conf.rot_ena) {
+			val |= (PLL_ROT_ENA |
+				(PLL_ROT_SEL_MASK &
+				 (conf.rot_sel << PLL_ROT_SEL_SHIFT)) |
+				(PLL_PRE_DIV_MASK &
+				 (conf.pre_div << PLL_PRE_DIV_SHIFT)));
+			if (conf.rot_dir)
+				val |= PLL_ROT_DIR;
+		}
+		pr_debug("%s: Rate %ld >= 0x%04x\n",
+			 clk_names[pll->index], rate, val);
+		writel(val, pll->reg);
+	} else {
+		pr_err("%s: freq unsupported: %ld paren %ld\n",
+		       clk_names[pll->index], rate, parent_rate);
+		ret = -ENOTSUPP;
+	}
+
+	return ret;
+}
+
+static unsigned long clk_pll_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	/* Don't care */
+	return 0;
+}
+
+static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *parent_rate)
+{
+	struct pll_conf conf;
+	unsigned long eff_rate;
+
+	eff_rate = clk_calc_params(rate, &conf);
+	pr_debug("%s: Rate %ld rounded to %ld\n", __func__, rate, eff_rate);
+
+	return eff_rate;
+}
+
+static const struct clk_ops s5_pll_ops = {
+	.enable		= clk_pll_enable,
+	.disable	= clk_pll_disable,
+	.set_rate	= clk_pll_set_rate,
+	.round_rate	= clk_pll_round_rate,
+	.recalc_rate	= clk_pll_recalc_rate,
+};
+
+static struct s5_clk_data *s5_clk_alloc(struct device_node *np)
+{
+	struct s5_clk_data *clk_data;
+
+	clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
+	if (WARN_ON(!clk_data))
+		return NULL;
+
+	clk_data->base = of_iomap(np, 0);
+	if (WARN_ON(!clk_data->base))
+		return NULL;
+
+	return clk_data;
+}
+
+static struct clk_hw *s5_clk_hw_get(struct of_phandle_args *clkspec, void *data)
+{
+	struct s5_clk_data *pll_clk = data;
+	unsigned int idx = clkspec->args[0];
+
+	if (idx >= N_CLOCKS) {
+		pr_err("%s: invalid index %u\n", __func__, idx);
+		return ERR_PTR(-EINVAL);
+	}
+
+	return &pll_clk->s5_hw[idx].hw;
+}
+
+static void __init s5_pll_init(struct device_node *np)
+{
+	int i, ret;
+	struct s5_clk_data *pll_clk;
+	struct clk_init_data init = { 0 };
+
+	pll_clk = s5_clk_alloc(np);
+	if (!pll_clk)
+		return;
+
+	init.ops = &s5_pll_ops;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+
+	for (i = 0; i < N_CLOCKS; i++) {
+		struct s5_hw_clk *s5_hw = &pll_clk->s5_hw[i];
+
+		init.name = clk_names[i];
+		s5_hw->index = i;
+		s5_hw->reg = pll_clk->base + (i * sizeof(u32));
+		s5_hw->hw.init = &init;
+		ret = of_clk_hw_register(np, &s5_hw->hw);
+		if (ret) {
+			pr_err("failed to register %s clock\n", init.name);
+			return;
+		}
+	}
+
+	of_clk_add_hw_provider(np, s5_clk_hw_get, pll_clk);
+}
+CLK_OF_DECLARE_DRIVER(microchip_s5, "microchip,sparx5-dpll", s5_pll_init);
--
2.26.2



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux