There is no need to have an additional check to call acpi_gpiochip_request_interrupts(). Even without any interrupts available the registered ACPI Event handlers can be useful for debugging purposes. While at it, add missed acpi_gpiochip_free_interrupts() call when unregistering ports. Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Cc: Serge Semin <fancer.lancer@xxxxxxxxx> --- drivers/gpio/gpio-dwapb.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c index 78662d6d73634e..2975f2d369874a 100644 --- a/drivers/gpio/gpio-dwapb.c +++ b/drivers/gpio/gpio-dwapb.c @@ -505,26 +505,33 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio, dwapb_configure_irqs(gpio, port, pp); err = gpiochip_add_data(&port->gc, port); - if (err) + if (err) { dev_err(gpio->dev, "failed to register gpiochip for port%d\n", port->idx); - else - port->is_registered = true; + return err; + } /* Add GPIO-signaled ACPI event support */ - if (pp->has_irq) - acpi_gpiochip_request_interrupts(&port->gc); + acpi_gpiochip_request_interrupts(&port->gc); - return err; + port->is_registered = true; + + return 0; } static void dwapb_gpio_unregister(struct dwapb_gpio *gpio) { unsigned int m; - for (m = 0; m < gpio->nr_ports; ++m) - if (gpio->ports[m].is_registered) - gpiochip_remove(&gpio->ports[m].gc); + for (m = 0; m < gpio->nr_ports; ++m) { + struct dwapb_gpio_port *port = &gpio->ports[m]; + + if (!port->is_registered) + continue; + + acpi_gpiochip_free_interrupts(&port->gc); + gpiochip_remove(&port->gc); + } } static void dwapb_get_irq(struct device *dev, struct fwnode_handle *fwnode, -- 2.26.2