On Wed, Apr 15, 2020 at 10:06:43AM +0300, Codrin Ciubotariu wrote:
> devm_gpiod_get() usually calls gpio_request_enable() for non-strict pinmux
> drivers. These puts the pins in GPIO mode, whithout notifying the pinctrl
> driver. At this point, the I2C bus no longer owns the pins. To mux the
> pins back to the I2C bus, we use the pinctrl driver to change the state
> of the pins to GPIO, before using devm_gpiod_get(). After the pins are
> received as GPIOs, we switch theer pinctrl state back to the default
> one,
>
> Fixes: d3d3fdcc4c90 ("i2c: at91: implement i2c bus recovery")
> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
Applied to for-current, thanks!
This will do for 5.7. For 5.8 or 5.9, I can imagine to take the two
pinctrl_state pointers into bus_recovery_info and handle all this in the
core. I will try this later this week if noone is super-eager to try it
out before.
Attachment:
signature.asc
Description: PGP signature
