Re: [PATCH v2 02/10] pinctrl: sh-pfc: r8a7790: Add r8a7742 PFC support

[Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>]

Hi Prabhakar,

Thanks for the update!

On Sun, May 3, 2020 at 11:47 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> Renesas RZ/G1H (R8A7742) is pin compatible with R-Car H2 (R8A7790),
> however it doesn't have several automotive specific peripherals. Add
> a r8a7790 specific pin groups/functions along with common pin

s/a r8a7790/automotive/?

> groups/functions for supporting both r8a7790 and r8a7742 SoC.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx>

> --- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c

> @@ -5736,6 +5750,7 @@ static const struct sh_pfc_soc_operations r8a7790_pinmux_ops = {
>         .pin_to_pocctrl = r8a7790_pin_to_pocctrl,
>  };
>
> +#ifdef CONFIG_PINCTRL_PFC_R8A7790
>  const struct sh_pfc_soc_info r8a7790_pinmux_info = {
>         .name = "r8a77900_pfc",
>         .ops = &r8a7790_pinmux_ops,
> @@ -5745,13 +5760,38 @@ const struct sh_pfc_soc_info r8a7790_pinmux_info = {
>
>         .pins = pinmux_pins,
>         .nr_pins = ARRAY_SIZE(pinmux_pins),
> -       .groups = pinmux_groups,
> -       .nr_groups = ARRAY_SIZE(pinmux_groups),
> -       .functions = pinmux_functions,
> -       .nr_functions = ARRAY_SIZE(pinmux_functions),
> +       .groups = pinmux_groups.common,
> +       .nr_groups = ARRAY_SIZE(pinmux_groups.common) +
> +               ARRAY_SIZE(pinmux_groups.automotive),
> +       .functions = pinmux_functions.common,
> +       .nr_functions = ARRAY_SIZE(pinmux_functions.common) +
> +               ARRAY_SIZE(pinmux_functions.automotive),
> +
> +       .cfg_regs = pinmux_config_regs,
> +
> +       .pinmux_data = pinmux_data,
> +       .pinmux_data_size = ARRAY_SIZE(pinmux_data),
> +};
> +#endif
> +
> +#ifdef CONFIG_PINCTRL_PFC_R8A7742
> +const struct sh_pfc_soc_info r8a7742_pinmux_info = {
> +       .name = "r8a77420_pfc",
> +       .ops = &r8a7790_pinmux_ops,
> +       .unlock_reg = 0xe6060000, /* PMMR */
> +
> +       .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
> +
> +       .pins = pinmux_pins,
> +       .nr_pins = ARRAY_SIZE(pinmux_pins),
> +       .groups = pinmux_groups.common,
> +       .nr_groups = ARRAY_SIZE(pinmux_groups.common),
> +       .functions = pinmux_functions.common,
> +       .nr_functions = ARRAY_SIZE(pinmux_functions.common),
>
>         .cfg_regs = pinmux_config_regs,
>
>         .pinmux_data = pinmux_data,
>         .pinmux_data_size = ARRAY_SIZE(pinmux_data),
>  };
> +#endif

The r8a7742 section should be inserted before the r8a7790 section,
to preserve sort order.

No need to resend, will fix up while applying.

Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
i.e. will queue in sh-pfc-for-v5.8.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds